Question about Computers & Internet

1 Answer

My monitor keeps saying no input signal why? - Computers & Internet

Posted by on

  • cam rosnick Apr 23, 2009

    Simmaler to your problem i have the same and i replaced EVERYTHING. new processer, harddrive, switched onboard video to a new card, and tried multiple moniters but no luck. let me know if you find anything

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Two possibilities:

  • either the video/mainboard of the monitor is defective; or
  • the video card/ CPU is the culprit.
A way to verify is to try the PC with another monitor or to try the monitor in another PC.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information. Good luck and kind regards. Thank you for using FIXYA.

Posted on Oct 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No signal input ton montitor


Try a different monitor. If that works, your monitor has gone bad.

Mar 03, 2013 | HP Pavilion Computers & Internet

2 Answers

How do I fix the error no vga input signal no dvi input signal monitor going to sleep


Check if you VGA is properly settled in the PCI slot. Try to take it out, clean the slot for dust.
If that doesn't help, it is well possible that you VGA is not working any more.

Jun 10, 2012 | HP Computers & Internet

1 Answer

My hp pavilion slimline s3020n pc is on but cannot view on the screen it says on the monitor VGA: no input signal


Check the video cable connectors, remove the video connectors and reconnect them again.
Check the monitor input settings make sure the input is set to VGA and not to DVI.
Try a different monitor.

May 20, 2012 | HP Pavilion Slimline S3020N PC Desktop

1 Answer

Cpu says no input vga signal, then goes to sleep


The no input VGA signal just means that the monitor is not receiving anything from the graphic card on the tower. Is the card a digital (DVI) output card? You'll know by the connector, it's white and slightly wider than a standard VGA connector. If so, perhaps the monitor is set to the wrong input?

If that isn't the case, and the computer is using an on-board or built-in graphics controller, you could try resetting the system's CMOS settings by setting the clear-settings jumper on the system board, or simply remove the plug and CMOS battery for a few minutes. Check the computer's documentation on the exact steps to do this.

Hope this helps!

May 19, 2009 | HP GX613AA Pavilion A6300F Desktop PC

2 Answers

My tower wont turn off and monitor says no input signal and keyboard doesnt work


Do you have two video outputs on your PC ie. one on the motherboard adn a separately installed card maybe? If you do you need to set the BIOS so that it uses the AGP/PCIE video card and not the 'onboard'. Try the onbopard vodeo card first to see if you get a signal there.

If you do NOT have two video outputs, and you can not see a signal then you may have a prblem wiht your monitor itself. Is this a known working monitor to start with?

May 12, 2009 | HP Pavilion a1610n PC Desktop

1 Answer

Monitor says no input signal


Do the icons look ok when you can see them? It sounds like your resolution may be way too high for the monitor. It loses sync and blanks the screen rather than show a lot of mess.

Boot your windows in safe mode (tap F8 before it gives you the progress bar.. just keep tapping it until you get a boot menu)

Everything should look big, but the monitor shouldn't cut out. Go to your display properties and set it to the lowest setting. (even if you can't move the slider, just click it once) Then OK and restart.

If that works, you should be in normal Windows with a horrible resolution. Go back to display settings and set it ONE STEP higher. Apply and have a look. If it's good, go another step, and repeat.

Apr 20, 2009 | Computers & Internet

1 Answer

DVI no input signal......VGA input active.


Are you running an additional Video card? Or are you using the built in one.
You might try cleaning the connector / plugs with acetone from finger polish remover or de=natured alcohol.
Never jam anything on a computer.
If its an add on card, remove it and reboot. Shut down and reinstall card and reboot.
keep me posted please,

Feb 22, 2009 | HP dx2300 Monitor Personal computer Intel...

1 Answer

Computer problems


The computer isn't giving you that message; it's coming from the monitor. It means the monitor is working properly but is not getting any signal from the computer. Your computer is not starting up for some reason. You'll need to find out what is keeping the computer from starting properly.

Feb 11, 2009 | Sony VAIO PCV-RS312 PC Desktop

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

302 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...