Question about Samsung HL-S4266W 42" HDTV

1 Answer

My t.v. shuts off after a few minutes

I've had the t.v. for less than 2 years but for the last 3 weeks i'll turn it on and less than 10 minutes later it shuts off...the lamp and standby lights flash

Posted by on

  • deeds79 Dec 27, 2008

    my tv shts off after 5 second followed by the sound a second later. and the power indicator says stand by in red letters.

×

1 Answer

Try this link...it tells you what the LEDs indicate. Apparently the cover on the back is not sealed properly, my guess is that it is a fan not working properly or some other reason the set is overheating.

http://downloadcenter.samsung.com/content/EM/200604/20060404091311750/EN/3_sub.htm

Posted on Nov 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi! My toshiba 2100td tv is over 10 years old and last few years it's having weird problems. When it's turned completely off (not in standby) and when I turn it on, the screen blinks for a 10-


The real problem here is its age, a lot of these sets of that age critically needed parts are just no longer available.

I repair them but the real risk is someone fixed it, a few months later it develops another problem etc etc etc.

Ten years is now a days a long life for a TV.

Apr 16, 2012 | Projection Televisions

1 Answer

Hello, my 55513 tv when turning it on was blurry. after a few minutes it became clear. shut off and came back about 3 hours later and it was blurry again for about 10 minutes. about 10 minutes later it...


in the customer menu select convergence when set acts up---look to see if grid of lines is skewed, see some photos and let me know if your problem anything like this..........
4_8_2012_1_08_59_pm.jpg4_8_2012_1_09_27_pm.jpg


4_8_2012_1_10_19_pm.jpg

Apr 08, 2012 | Mitsubishi WS-55513 55" Rear Projection...

1 Answer

Just replaced lamp a week ago and tv worked fine


2 things will cause this Lamp is defective, or Fan to lamp quits running this will shut TV OFF, if the fan quits running while Lamp is on it is design to shut Lamp Off to prevent Damage to Lamp IF Fans are ok It will be the Ballast board It is what turns Lamp on.Look on E-Bay for Ballast board if it turns out thats what you need or call Encompasss Electronics 1-800-638-3328

Sep 19, 2009 | Toshiba 62HM95 62" DLP HDTV

1 Answer

My Sansung HL-S4266W just shut off one evening while watching. It had all 3 lights blinking and it had been over 3 years since buying the tv. I replaced the bulb, nothing changed the tv would still turn on...


this could be the color engine or a power supply problem. My suggestion is to not put anymore money into this tv, its an old technology and you will be replacing parts for it every 3 or so years. eventially the parts will not be able to be found. Go get a new tv, save yourself money and headaches.

Jul 17, 2009 | Projection Televisions

1 Answer

TV wont turn on, makes buzzing noise and shuts off


I have two RCA HD52W59 TV's. I have had one for 3 years and one 4 years. The one I have had for 4 years is giving me the problem. Last week the tv turned off while watching it. It wouldnt come right back on. 10 minutes later we tried and it worked fine. the other night the kids were watching and it turned off and smelled like something burning. I tried turning it right back on and got no power at all. I tried to turn it on two days later and it made a buzzing noise and the green light went out. Never did get a picture, no powering up on the screen. Any ideas? Don't want to spend alot of money. Really loved the TV hope it isnt junk now. Better yet I hope the same thing doesnt happen to the other one I have.

Jan 22, 2009 | RCA HD52W59 HDTV Projection Television

1 Answer

Sony 57" rear prijection TV has a fast flashing light and will not turn on


turn on tv, after a few minutes picture goes black, but still have sound. red light blinks 5 times,turn set off same thing happens when you turn set back on. some times it want do it for 10 min.

Apr 25, 2008 | Sony KP-57WS500 57" Rear Projection...

1 Answer

40H80 Toshiba Rear Projection TV


it sounds as if it is solder related, bur hard to say for sure. You ay need a service manual to actually trouble shootthe power supply and opeating circuits. I will post a lnk where you can get a service manual emailed to you

http://servicemanuals.vstore.ca/

Feb 09, 2008 | Toshiba 40H80 40" Rear Projection...

2 Answers

KDS-R60XBR1 Sony Projection SXRD Power Issue?


how many times does it blink pause then blink again?

Dec 01, 2007 | Sony KP-41T65 41" Rear Projection...

1 Answer

Shutting off and on...


the problem may be due to dry soldering in the power supply stage if it was with the lamp there would be red or green light showing the presence of the power to the tv after making it own some of the components get hot and it will make the the soldering point conectionless and after some time the heat sink get cooled and the soldering point gets connected and u will see the picture again it is a simple problem if u have a soldering iron u make it hot and re solder all the components in the first part of the circuit board and the problem if rectified

Jul 03, 2007 | LG RU52SZ30 52" Television

Not finding what you are looking for?
Samsung HL-S4266W 42" HDTV Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

Donald Griswold
Donald Griswold

Level 1 Expert

8 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Samsung Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...