Question about Kitchen Ranges

1 Answer

Kenmore convection oven will not heat up, check voltage at plug and it is fine.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 414 Answers

The problem will be either a blown heating element/thermostat or a faulty on/off temperature selector switch. Check each seperately, for continuity, to identify which it is and replace. This should Fixya!




Please remember to rate this article.

Posted on Oct 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will a plain fan convection/microwave ROAST/BAKE as well as a "true" convection that has an extra heating element and fan convection/microwave


Most likely the Kenmore is actually made by Sharp. Most of the combination microwave/convection ovens are. I have one with a "Wolf" name on it, and it roasts/bakes very well.

Apr 07, 2015 | Kenmore Kitchen Ranges

1 Answer

I have a Jenn-Air Model # JER8885QCS range which is 3 years old. The bottom oven coil is not heating up. When I replaced the coil, I noted the old one was burned in one spot & melted apart. However,...


First off, check to see if it is still under warranty. You will need the Model #, and Serial # before you talk to the factory. The unit is either single phase (2 separate 120v circuits) or 3 phase, (3 separate 120v circuits) To check voltage properly you CANNOT check voltage to ground. You have to check wire to wire. you will get a reading of 208, or 240 volt. On a 3 phase, you need to check all 3 wires to each other, and MUST come up with either 208, or 240v between ALL wires.

Mar 30, 2010 | Kitchen Ranges

1 Answer

79079383400 oven does not put out any heat


Your oven control module is gone. Replace.

Mar 31, 2009 | Kenmore Kitchen Ranges

1 Answer

Electrolux built in wall oven, lights and digital display work fine, fan works fine, but the oven will not heat regardless of the mode (broil, bake, convention roast, convection bake)


Hello stevefer
Welcome.

You said, Your Electrolux built in wall oven, lights and digital display work fine, fan works fine, but the oven will not heat regardless of the mode (broil, bake, convention roast, convection bake)

First,
1.What is the Model Number and the year of your wall oven?
2.Did the oven light up and display with any error codes?
3. Did you try to turn the breaker off for 5 minutes to see if this will reset the system?

Perhaps the heating element is failing and may need to be replaced.
I will be able to better assist you when you reply with this information.
Waiting your response.
Huuum

Oct 16, 2008 | Kitchen Ranges

1 Answer

Oven won't heat


hi. thanks for the question. i would replace the igniter, on the oven burner.that will solve the problem. thanks the appliance doc

Sep 30, 2008 | Kenmore 79012 / 79014 / 79019 Gas Kitchen...

1 Answer

Oven not heating KitchenAid KERC506HWH3


Need to check and see if you are getting 220 volts to the element or if the element is showing resistance with an ohm meter. Any resistance means it is ok. If you are not getting voltage to the elements and resistance is ok then the control board is bad. Note: Always check outlet for proper voltage first! Never know when a breaker has gone bad. Should have 220 volts from line 1 to line 2 and 110 volts from line 1 or line 2 to ground.

Nov 16, 2007 | Kitchen Ranges

2 Answers

Kenmore Elite Electric Convection Oven Not Working


Check the voltage at the wall Sounds like you have lost one 120 voltage side Red to white should read 110-120 black to white should read 110-120 red to black should red 220-240 check at range and at the wall hope this helps

Aug 25, 2007 | Rangemaster Classic 110 (Dual Fuel) Dual...

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

yadayada
yadayada

Level 3 Expert

64286 Answers

paulcarew

Level 3 Expert

2059 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...