Question about Sony KP-51WS500 51" Rear Projection Television

2 Answers

While watching the tv we lost the picture. Now only thin lines of color like a rainbow.

Opened the back of the tv to check bulbs and only blue bulb was lit. So opened the front of the tv and adjusted the reed and green until they came on. All bulbs working now. Still no picture. No onscreen menus appear if channel or input is changed from the remote. Cable is fine. Can anyone help?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

KP-51ws500 no video.
it started with poor picture when initially turned on but getting better when all warmed up. Until one time the video does not show up anymore.

Please anyone advise if this is fixable. Do I need part replaced ? Where to get it ? Please advise

Posted on Oct 30, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

Have the color wheel checked for damage

Posted on Nov 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Philips 55PL9774 no video but have audio


There is a protection switch on the inside where the replacement bulb slides out, check to see if it is either tripped or not making connection, If that doesn't fix your problem, check and make sure that there is absolutely nothing on the bulb and/or the glass shield, also visually inspect the bulb for bulges or defects, if found replace the lamp or entire color engine.

May 20, 2013 | Projection Televisions

1 Answer

Tv is yellow orange color what is problem


The model indicated does not have a "bulb" as it uses 3 picture tubes.

Examine the picture with color set at zero---stand back and look= if the screen has a mostly yellow (all or part of the screen) you have bad Glycol in the blue picture tube(if need explanation ask) and a look in the lens of the Blue tube will confirm this.

If able with back off and a small mirror look in each lens--red picture, green picture and blue picture.

If the Blue looks like a floodlight with little or no image--bad glycol in that tube.

Jun 16, 2012 | Samsung HCN5527W 55" Rear Projection...

1 Answer

RCA 42" Projection TV


Did you cheak the bulb? I believe those also have red yellow and blue lights to make up the color spectrum you should check all of these bulbs

Feb 29, 2012 | RCA Projection Televisions

2 Answers

I think the color bulbs are going out. I called


3D pic?Ur convergence it dead.U know how to solders?Tries these websites for convergence kit.Use replaced what in the convergence kit. Tv repair World.com,or Tvrepairkits.com.

Dec 14, 2009 | Mitsubishi WT-46809 46" Rear Projection...

1 Answer

I have a hitachi rptv model #43FWX20B and the picture has a red tint to it. Opened back up and red green and blue bulbs light up. red bulb stays bright while blue and green go dim to bright as tv plays....


Howdy;
Since you don't have any white lines with the red screen/picture I would say that the red bulb (CRT) is conducting too much. There is an adjustment control for that. The 'sceen' control is behind the speaker cover and service cover. Turn red screen control slightly to the left until you get a good black and white picture.

Good Luck, Big Irish.

Nov 22, 2009 | Hitachi 43FWX20B 43" Rear Projection...

1 Answer

Video distortion


You need to take your tv in and have the picture deflector re-aligned.  This doesn't cost much, My dad had to do that to his a few months ago and it cost 30 bucks.

Mar 21, 2009 | Mitsubishi VS-60705 60" Rear Projection...

1 Answer

Sony-kp51ws510 picture turns to a blue hue with flickering colors


hello there this is an easy fix unplug the tv and take the back of the set, once inside the set you will see 3 coloured bulbs and a big mirror in the back theses over time get dusty and dirty and if you smoke it can get really bad you simply just need to clean the bulbs and the mirror with computer screen wipes or some sort of window cleaner be sure not to get everything wet inside this should sort if for you nice and clear again!

Thanks For Using FixYa

Feb 07, 2009 | Sony KP-51WS510 51" Rear Projection...

2 Answers

PT-47WX, Blue streaks across the screen?


It is not a bulb. It is a picture tube. If there are thin blue lines across the entire screen, not just the edges, and the picture itself looks too blue, it means that the blue picture tube is being driven too hard. This could be because the blue screen voltage is too high, the boost voltage on the blue picture tube is too low, or the video output is leaky or shorted. If the picture has what looks like blue arcs and double images on one or more sides of the picture, it means that one of your convergence IC's has burned out and needs to be replaced. These are things that should be tested and serviced by a qualified tech, so allow an experienced tech to handle it for you.

Sep 07, 2007 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

No picture, just red-blue-green lines through the middle of the screen very faint.


The PT-53WX54 is a standard projection set and does not have a bulb. It has 3 separate picture tubes. If you have lost the picture completely, not even on-screen menu, then something has stopped working in your set. It could be a video processor, vertical deflection or possibly a convergence problem. The set should be serviced by a qualified tech familiar with the Panasonic projection sets.

Aug 22, 2007 | Panasonic PT-53WX54 53" Rear Projection...

1 Answer

57" Toshiba with wavy green/red lines "good overall picture"


Appears to be a convergence problem, the chips are located on large aluminum heat sinks. Check near the 2 or 3, STK IC's for + and - voltage usually 20 to 25vdc. If 1 or both are missing, check microfuses. They should both be close to equal in voltage reading, if not, turn set off after it has been on for 10 minutes, feel the heat sinks at each IC,if one is hotter than the other, replace both IC's or all 3 if it has them. Now check the small low ohmage resisters in and around the STK IC's and you will most likely find a few burnt or discolored and have changed in value, replace these or the new chips installed will self destruct.

Jun 26, 2007 | Toshiba 57H81 57" Rear Projection...

Not finding what you are looking for?
Sony KP-51WS500 51" Rear Projection Television Logo

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Projection Televisions Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

Ap12
Ap12

Level 2 Expert

103 Answers

Jason Harris
Jason Harris

Level 2 Expert

256 Answers

Are you a Sony Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...