I've just got some movies off a friend, which he recorded onto DVD-R's. I went to run one of them last night, and everything was fine, and I was pleased. Anyway shortly afterwards I swotted discs and nothing. I changed back to the original and still nothing.
When I put the CD in, the CD light illuminates for a short while, but the CD/DVD drive doesn't recognise the disk. I've tried ordinary CD's and even CD-RW and these all work fine. I re-installed the Driver and still no luck.
Does any guru out there know what the problem might be? Any assistance is gratefully appreciated.
I had a problem like this a while ago. If you check in the manual it will state what forms of disk the drive will read or burn to. I found that mine will only allow me to use the ' + ' variants of disks and not the ' - ' ones. Wish I'd read it sooner and saved myself a fortune on unusable CD-R/RW's and DVD-R/RW's
Whilst typing on screen the cursor drops to the bottom of the page at random - has anybody any idea...
(More)
Whilst typing on screen the cursor drops to the bottom of the page at random - has anybody any idea what the problem might be. It is totally random - and not connected to my touch pad!
On startup after the Fujitsu logo screen, I get the ami screen with the following message: CMOS...
(More)
On startup after the Fujitsu logo screen, I get the ami screen with the following message: CMOS settings wrong CMOS date/time incorrect Press F2 to run setup No keys work so pressing F2 does nothing. The laptop worked fine 2 days ago. I have renewed the internal battery but still get the same message. I cannot move pass this error screen Can you help? Thanks, BR Peter
audio molto basso, le casse esterne o cuffie non funzionano inoltre quando si inseriscono non...
(More)
audio molto basso, le casse esterne o cuffie non funzionano inoltre quando si inseriscono non disabilitano le casse interne
My new Fuj-Siemens Amilo laptop has a different cable socket to the earlier standard external...
(More)
My new Fuj-Siemens Amilo laptop has a different cable socket to the earlier standard external monitor and projector cable sockets! Is there a converter or special cable available and from where. What is its official description. I want to connect to a standard projector. The socket on the rear of the Amilo has a logo of an oval with an arrow and square bend sign!! Your advice would be appreciated.