Question about Projection Televisions

1 Answer

My lcd is in black and white or reverse color. Can that be fixed?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

How do you have the cables connected to the TV? If you are using the RGB cables (Red Blue Green cables) they can be bad and just give you certain colors and make it seem like black and white. The easiest way to fix it is to get new cables from Wal-mart, Best Buy, Circuit City or any other electronic store. If you are using the Aux cables (Yellow, White, and Red) the Yellow cable may be cut or crimped so you have limited color. If you are using coaxial cable or the cable that connects to the cable box the same problem may be there. The cable may be bad and may be in need of replacement. If it isnt the cables then the color scheme on the LCD TV may be out of wack. You can fix that by going to the picture settings and changing it from there.

Posted on Oct 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a picture, but no color.


it will cost more to fix than a new flat screen lcd

Mar 28, 2015 | Projection Televisions

1 Answer

The tv on;y shows a small pip window in color if it is a large picture the picture is in black and white how to fix?


Whatever input video signal you're using, PIP should be in color. What are you using out of your dvd for the second video input source, composite or component? Composite you should always have color, Component, if you have a bad red or blue, and just the green is working, you will get black and white. The green is the luminence signal.

Nov 23, 2011 | Projection Televisions

1 Answer

Color is terible and can fix it


This DLP tv have a colors wheel.Ur tv colors wheel is dead.When u have black & white picture,colors fade in and out.The tv make loud squiling or loud motor noises.All these problems are related to the colors wheel.Hire a tv repair Tech. for this job,because the colors wheel,require take out alots of machanical's parts out even before to get to the colors wheel to replaced it.

May 29, 2010 | Samsung HLR5067WX 50" Rear Projection HDTV

1 Answer

LCD projector not displaying color only black and white


Did you ever see color on this projector?
It could be the composite input cant detect the "color burst" 3.58 mhz signal for chroma.

Have you tried a different input?
That could help you track down what the problem may be.

Oct 31, 2009 | Projection Televisions

1 Answer

Distorted picture. changes from color to black and white.


Hi, this is a bad main board that is causing this issue you are experiencing. simply replacing this board will fix this issue.

Click Here

May 21, 2009 | Mitsubishi WS-55511 55" Rear Projection...

1 Answer

Hitachi loses color


you are losing one of your color tubes for it to be goiing to black and white.

Jan 27, 2009 | Toshiba 57H82 57" Rear Projection...

1 Answer

Hitachi 50 Rear Projection color TV


the easiest way is to turn the color all the way down to zero. Then notice the overall color of the screen, if it doesnt appear as a good black and white picture you will have to adjust the screens. To do that you have to remove the speaker grill cover and the small access panel, then depending on the chassis you will see a small square with 6 dials on it 3 on top and 3 on the bottom it will have screen stamped on it. adjust those 3 untill your screen appears the best black and white picture as possible. Now if your chassis only has 3 dials on the sgaure control box those are focusdont adjust them. . then the 3 CRT boards will have the dials you need adjust those for the best black and white picture. when your satisfied that you have a good black and white picture. then turn your color back up and adjust the tint.Let me know if you need more assistance.

Jun 22, 2008 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

Projection LCD flickers to black and white


If the S-video cable is not completely in it will do this. You need to remove and clean tips on S-video cable/ replace, this is your problem.

Mar 10, 2008 | JVC HD-52Z575 52" Rear Projection...

1 Answer

Rear Projection Tv Problem! black and white... Please help


go into menu turn color off see if you have a black and white picture if not adjust red,green, and blue screen drive on controls in back of tv you have red, green, blue it will have focus /screen controls cover each tube do one at a time blue focus and screen drive adjust to clear blue picture do all 3 tubes, then adjust them to where you have a black&white picture once this is done turn color controll back on.Thank You for using FixYa and Have a Nice Day.

Nov 11, 2007 | Toshiba 50H72 50" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...