Question about Gigabyte GA-M59SLI-S5 Motherboard

1 Answer

Ethernet Drivers (slow internet access)?

I had a main hard drive crash. So, I bought a new hard drive and re-installed Windows XP Pro and also the GA-M59SLI-S5 motherboard drivers. The motherboard drivers are supposedly the latest drivers, which were downloaded from through the Gygabyte website. My DSL internet connection has now slowed down significantly. I tested the connection by plugging the cable into my laptop computer, and found that the speed is OK on the laptop. Therefore, the problem resides with my desktop computer. Is this a hardware or software driver issue?

The Device Manager shows the following under Network Adapters: 1394 Net Adapter, NVIDIA nForce 10/100/1000 Mbps Ethernet, NVIDIA nForce 10/100/1000 Mbps Ethernet #2;
and the following under NVIDIA Network Bus Enumerator: NVIDIA Network Bus Enumerator, NVIDIA Network Bus Enumerator.

The Driver File Details for NVIDIA nForce 10/100/1000 Mbps Ethernet are:
C:\WINDOWS\system32\DRIVERS\NVENETFD.sys (file version 1.00.02.06789)
C:\WINDOWS\system32\fdco1.dll (file version 1.1)
C:\WINDOWS\system32\fdco1ins.dll (file version 1.1)

The Driver File Details for NVIDIA Network Bus Enumerator are:
C:\WINDOWS\system32\bdco1.dll (file version 1.0)
C:\WINDOWS\system32\bdco1ins.dll (file version 1.0)
C:\WINDOWS\system32\DRIVERS\nvnetbus.sys (file version 1.00.01.06789)
C:\WINDOWS\system32\DRIVERS\nvnrm.sys (file version 1.00.02.06789)
C:\WINDOWS\system32\nvconrm.dll (file version 1,3,3,27)

Are these correct for my system? Or is there some other problem?

Posted by on

  • Anonymous Nov 22, 2008

    where can i found the old driver for my nforce eternet ??? beacause my uspeed is very bad and that after installing the new version of n vidia drivers

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,605 Answers

The fastest speed is the slowest path on the network.
right click on the my network place.
right click on the NIC local connection
click on configuration at the right of the connect using (NIC)
second tab, "advanced" check the speed & duplex- it should be auto, but you can change it. do not recommend it.
check resources- make sure it has no conflect with any other device.
if that doesn't help. uninstall the NIC driver and try to find a older driver. Sometime that works better, don't ask me, but it works.

Posted on Oct 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windows Xp Pro installation cannot find the sata hard drive. It's also not recognized in the bios. I need the drivers contained on a floppy Where can I get said drivers. A search on the internet p


Hi, forget the driver, try replacing the sata cable, reseat or clean the sata port. do isolation by trying the drive o another PC.You may have hard drive issues.

Jun 20, 2013 | Tyan Tomcat K8E Motherboard

2 Answers

I just install win7 on my computer then plug in the internet cable then i cant get no connection. i went to device manager it say driver needed call (ethernet controllor) agp8x motherboard driver ...


click start control panel admistrive tools computer management device manager scroll down network adapters + expand Ethernet driver right click you will have options to update driver disable uninstall or select properties general you will have the options to troubleshoot or to update driver rollback or uninstall
a yellow? ! question or exclamation mark or red x means you need to install/update driver right click to install driver
http://www.driverstt.com/downloadfile/50575/asus-p5p800-vm-realtek-rtl8100c-ethernet-driver-5-624-304-2005/
hope this helps
http://download.cnet.com/realtek-rtl8168-8111-pci/3000-2112_4-99235.html Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC: The Realtek RTL8168 Gigabit Ethernet controller combines a triple-speed IEEE 802.3 compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver, PCI Express bus controller, and embedded memory. With state-of-the-art DSP technology and mixed-mode signal technology, it offers high-speed transmission over CAT 5 UTP cable or CAT 3 UTP (10Mbps only) cable. Functions such as Crossover Detection & Auto-Correction, polarity correction, adaptive equalization, cross-talk cancellation, echo cancellation, timing recovery, and error correction are implemented to provide robust transmission and reception capability at high speeds.


Apr 24, 2011 | MSI 661FM-L, 601-6540G-010, Microstar P4...

1 Answer

My computer crashed and i had to fix it with a new drive, after installing the drive and registering it in the system i loaded windows xp pro as it was running prior to the crash, the problem now is that i...


You can download the drivers from ASUS WEB site. Selectyour model motherboard/computer/laptop, and make sure you select the Windows XPor Vista version of the drivers that matches your Windows operating system.Please click on this link to their WEB support site : - http://support.asus.com/download/download.aspx?SLanguage=en-us Check the motherboard specification for the largest capacity hard drive the BIOS can support. A BIOS upgrade may allow you to install a larger hard drive. You can use a large capacity external USB hard drive or install a second hard drive in your computer.

Jan 14, 2011 | ASUS K8V-VM (K8V-VM GREEN) Motherboard

1 Answer

Gigabyte Ga-K8N Pro Windows XP Installation


Download "MEMTEST86+" from the Internet.
One version boots from a diskette;
another version boots from a CD-R (that you have created).

Either way, make MEMTEST do a "full" test of the RAM in your computer -- bad RAM can cause "unpredictable" crashes.

Sep 13, 2009 | Gigabyte GA-K8N PRO nVIDIA nFORCE3,...

1 Answer

Kv8 pro motherboard, all ethernet drivers gone, no usb port functions suggestions please.


Couple solutions for you:
1.) Burn drivers to a CD
2.) Put ethernet drivers on a floppy, install a floppy drive.
3.) Remove hard drive, attach to a different PC, copy drivers to the root folder of the drive, then put back, start up, install drivers.
As far as USB ports go- check the BIOS, make sure they are not turned off. If they are not, sorry, you have a malfunctioning mobo, or a bad install of windows.

May 01, 2009 | Motherboards

1 Answer

New hard drive not reconized, motherboard drivers


I had this problem on a computer recently. This particular motherboard may be needing the driver on the Windows XP SP2 disk. Your motherboard may have been made to use Microsoft SATA drivers. Othewise, there would have been a driver disk that came with the motherboard to let it see that SATA hard drive.
If it's a new hard drive, you have to reinstall the O/S so use a disk new enough to have SP2 included.

Jan 17, 2009 | Biostar K8VGA-M Motherboard

2 Answers

I need to install drivers on an old HDD for an Asus K8V mobo.


Hi gordonal123, installing drivers through safe mode is not recommended. If you want windows to function correctly than do a fresh install of windows. Over writing the Gateway hdd will cause you more grief. Windows registry will go nuts.
Link to download the Asus K8V drivers.
http://support.asus.com/download/download.aspx?SLanguage=en-us
Here is what you need to do. Boot to your windows CD while using the Gateway system & hdd. Create a new partition within the free space of the Gateway hdd. (Follow windows onscreen instructions to create a new partition within the free space of hdd). (This will maintain the current windows function).
Restart windows when finished. Windows will create a second partition on the Gateway drive. Go to the Asus link above & download all the drivers for the K8V MB, onto the second partition of the Gateway hdd. Once downloaded & uncompressed into their own folders you can than boot to the windows CD & format the primary partition & install windows fresh onto the formatted partition. When finished you can install the K8V driver still located on the secondary partition. Copy & past these driver folders to your primary partition. Than use windows disk management software to erase / delete the secondary partition. (diskmgmt.msc).
When finished you'll have all the drivers for the K8V MB, no need to buy a PCI LAN card & more importantly a fully functioning windows with-out issues.

Good luck gordonal123!
Take your time.
Mike

Dec 30, 2008 | ASUS Motherboards

1 Answer

Terrible slow internet connection after installing SP2


If you are sure it is a motherboard problem relating to the on board ethernet connection, purchase a PCI slot ethernet card and see if using the card manufacturers drivers are better than the motherboard ethernet drivers. Although i'm not sure how a slow connection is the motherboard problem, it maybe that it's SP2 thats the problem. Have you checked the driver that is used for the onboard ethernet connection, it maybe you need to re-install original motherboard ethernet driver you got with it.

Dec 07, 2006 | Albatron KX600S Pro Motherboard

Not finding what you are looking for?
Gigabyte GA-M59SLI-S5 Motherboard Logo

2,864 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gigabyte Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Tony

Level 3 Expert

2598 Answers

Are you a Gigabyte Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...