Squirrels chewed through my hose. When I took apart the pieces I damaged a brass fitting and now I need to find replacement parts. I am having trouble. My email is firstname.lastname@example.org. Thanks for any help.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
cu the same length as gas hose from a piece of garden hose. cut the garden hose lengthwise and put that over the rubber hose. the garden hose is not rubber it has a soft plastic wich they probably will not like the taste of. kind of like the smell of the water when you first turn it on on a hot summer day.
You will need to replace the entire Hose/Regulator Assembly . They're about $30.00 at hardware stores and home centers that sell grills and accessories. You may also have to purchase a brass reducer depending on the size of the hose connection to your grill's manifold. That should run about $3.00 or less. Take your old Hose/regulator Assembly with you for comparison purposes.
Hope this helps you and Happy Grilling!! Thanks for choosing FixYa.
Are you trying to remove the hose connection from the grill's manifold? Or separate the hose from the regulator? If it's the latter, give up that idea. It wasn't made to be disconnected, despite there being a brass nut on it.
If it's the hose from the gas manifold, you may need 2 wrenches. One for the nut and the other for holding the manifold connection in place. To be safe and prevent some busted knuckles. Wipe the WD40 off the fitting, before attempting to loosen them. I know it's a tight fit, but be carefully persistent.
I hope this helped you and thanks for choosing FixYa.
Hello, Take it to your local propane co and have them make up a new hose for you. Be sure to bring the hose and regulator, or just bring the whole grill with you, so they can see what you have. Some bbq hose ends don't have regular swivel brass fittings on them anymore, bit instead use a hose barb adapter to reattach directly to the grill. So I'd suggest bring it all just in case you have one of those kinds. Douglas
he new style OPD valves have a small brass ring located in the female
fitting on the LP tank. Over time this ring can work loose and then it
does not allow the male fitting to fully depress the OPD valve thus
reducing your gas flow
Using a small flat bladed screw driver tighten the small brass ring This
should solve your problem
The new style OPD valves have a small brass ring located in the female fitting on the LP tank. Over time this ring can work loose and then it does not allow the male fitting to fully depress the OPD valve thus reducing your gas flow Using a small flat bladed screw driver tighten the small brass ring This should solve your problem
I have used aluminum gutter guard and cut it the size I needed and wrap it around the hose. It's easy to cut and easy to wrap around whatever you need to. It's sold a places like lowes etc.I've used it on electrical wiring harness's on my tractor and it stopped them.