Question about OKI KIT-C3530N MFP LASER CLR P/S/C/F USB ENET 1200X600 128MB Printer

1 Answer

Error message after installing new tonner

Error message is as follows:

Check Toner Cartridge
Cyan
Toner Sensor Error

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 97 Answers

Check the little switch/door on the left hand side of the drums.
This has worked successfully for me.

Symptom:
After replacement of a C3530 Image Drum, the message, "Toner Sensor Error" is displayed.

Error message after installing new tonner - 0.10a?openelement&fieldelemformat=gif




Cause:
The plastic shutter in the ID is fully or partially covering the toner sensor window.




Resolution:
Move the cover upward to allow for the sensor to become fully exposed prior to reinstalling the drum.

Posted on Dec 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replaced cartridge still get error message


Clear the error, then hold the switch off then on.

Oct 14, 2012 | Canon imageRUNNER C2550 Color Copier

1 Answer

Error c cart


Try the following...
-Remove the cyan cartridge from your printer and close any open doors.
-Turn the printer off.
-Turn the printer on again.
-Firmly re-install the cyan toner cartridge.
This will force your printer to actively look for a new toner and hopefully it will be accepted this time. If the problem remains install the old toner cartridge (if available) to make sure the error disappears.

Assuming it does it would appear there may be a genuine fault with the toner cartridge. If not there is almost certainly a sensor error inside the printer and I would advise contacting Dell (if it is within warranty) or a technician if it is outside of warranty.

Sep 11, 2012 | Dell 3110cn Laser Printer

2 Answers

What is a service code c2558 mean on my copier?


C2558: Abnormally high toner density detected black TCR sensor
Reinstall imaging unit
Reinstall toner cartridge
Change imaging unit/K
Change PRCB

Sep 28, 2010 | Konica Minolta Bizhub c203 Copier

1 Answer

Installed new cartridge and comming up machine won't regognise it saying tonner life end install new cartridge


To reset the sensor after installing a new toner cartridge follow these steps. 1. With unit powered On, open the front cover. 2. Press the “Options” key. Display will show “Replace Drum?” 3. Press “Start” key. 4. Press 1,0 . 5. Display will show “Accepted” for approximately 2 seconds. Then display will change to “Cover Open”. 6. Close cover and see if Toner Life End error message has gone.
Try this. We are Brother authorized.

Apr 15, 2010 | Brother MFC-7420 Laser Printer

2 Answers

Toner Sensor Error for Cyan and Toner Out for Black


First, I wouldn't worry about the "K toner out", it might finally disappear once you get rid of the Cyan problem, if indeed you replaced the black toner for a new and healthy one.

Make sure that the cyan toner cartridge is securely fitted in it's drum unit, and the "knob" that opens the toner cartridge is in fully open position. Sometimes when manipulating inside the printer the "knob" might get moved a bit.

Generally, the toner cartridge sensor is connected via the drum unit, so usually the problem is with proper seating of the drum unit and good electrical contact between the metal fields on the sides of the drum unit and contacts protruding inside the printer. Cleaning both of any residue might help.

Once I had a defective toner cartridge, that caused such problem, but it was the contact between the toner cartridge and the drum that was broken. You have to experiment a bit.
I'm pretty sure in this model it is possible to swap two units - if you swap for example cyan with magenta, and observe if the error moves from cyan to magenta or not, you can draw conclusions if the problem is with the toner/drum, or with the printer not seeing the cartridge for some reason (sensor inputs killed by static electricity for example).

Oct 26, 2009 | Printers & Copiers

2 Answers

Toshiba E-Studio 3511 Check Color Toner Cartridge


there is a sensor above the coloer developer unit clean it or change the sensor


Sep 30, 2009 | Toshiba E-Studio 3511 Color Copier

1 Answer

17H Service Required


Hi,

Please follow the solution in the link below. Also as you putting in the cartridge always check for loose toner in the area and on the cartridge itself as this can block the sensors.

http://www.support.xerox.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=74,E=0000000001343666831,K=8485,Sxi=0,Case=obj(3510)

Niallbt

Mar 29, 2009 | Xerox Phaser™ 6115MFP/D All-In-One Printer

1 Answer

Epson Aculaser C1100 erro message install C tnrcart


You need to remove the cyan cartridge, and thoroughly clean the inside of the printer (please use proper printer cleaning kit, not a damp cloth!). The sensors can get crudded up with loose toner inside the machine.


Oct 28, 2008 | Epson Aculaser C1100 Printer

1 Answer

Install Cyan Toner Error


ensure that the one you install is the exact model name and number, if this is correct, try unistallling once again and check one more time,

you might want to get a new cyan toner if this still fails, i dont think there is a prob in your machine, cheers

Aug 16, 2008 | Samsung CLP-510 Laser Printer

Not finding what you are looking for?
OKI KIT-C3530N MFP LASER CLR P/S/C/F USB ENET 1200X600 128MB Printer Logo

983 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Printers & Copiers Experts

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

SiNnA
SiNnA

Level 1 Expert

38 Answers

Dominion Computer...
Dominion Computer...

Level 2 Expert

269 Answers

Are you an OKI Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...