Question about OKI C9500dxn Led Printer

1 Answer

OKI C9500 The printer starts and shows: initializing. That´s it. Nothing more. No error-Codes Some ideas? Thx Markus

Posted by on

  • Markus Gehlenborg Nov 24, 2008

    Hi jvizy. It works.



    Thank you very much!



×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We had this issue and removing the optional hard disk fixed it for us, I'm guessing it was on the way out and wasn't really being used so it will not be missed.

Posted on Nov 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oki b431d paper jam


Paper jam is initiated by a sensor that does not register (or tell the logic board it has registered) a movement of the paper through the printer. Try finding out what sensor is near the point the paper stopped. Look if anything id blocking a optical sensor, or any small lever is blocked in free movement. Close all covers correct and make sure nothing is blocking the covers. Not even just a small piece of paper.

Jul 16, 2014 | Oki Electric Industry B431d Printer

2 Answers

We have replaced the belt in oki c5950 printer and the warning light is still on and displaying Belt life error


1. Turn machine on while pushing and holding the TWO up/down menu buttons at same time.
2. Menu window will show "OKI USER"
3. Scroll to " Engine Dialog Mode" is indicated. Push Enter button.
4. "Diagnostic Mode xx.xx.xx S-Mode is indicated.
5. Scroll to "NV-Ram initial" is indicated. Push ENTER.
6. Window shows "NV-Ram- Initial Table 1".
7. Push ONLINE and ENTER Buttons simultaneously and HOLD for 10 seconds after you see "Executing Reset" appear in menu window.
8. Restart printer.

May 10, 2011 | Printers & Copiers

1 Answer

I have a Oki C9500 laser, the magenta print is streaky


I have the same problem with my OKI c3100, please help

Jan 13, 2010 | OKI C9500dxn Led Printer

1 Answer

EPSON PX700W


I would take them out and double check for any remaining packing material etc and then make sure they are fully inserted. The simple things are always the ones to start with

Sep 26, 2009 | OKI C3200n Led Printer

1 Answer

OKIDATA C9500 WITH error 002 and the printer keeps rebooting itself


Error 002 is an cpu exception fault caused by a defective controllerboard (CU board)
When replacing this board remember to replace the eeprom on the controller from the old board to the new one.

Oct 06, 2008 | OKI Printers & Copiers

1 Answer

Oki c9500 fuser


If you need replacement here you find some offers:

Okidata Fuser Unit 120 for C9300 C9500 ... $189.72 - pcRUSH OKI 41946101 Fuser Unit 120V ... $160.83 - PROVANTAGE Okidata C9300, C9500 Fuser Unit ...

Aug 08, 2008 | OKI Printers & Copiers

1 Answer

Have an OKI Printing Solution C5800 color printer received the following error message: Check Toner cartridge 543K Toner Sensor error - have already changed the Drum and the toner. The error will not go...


Found this at Fixyourownprinter.com

1. Turn machine on while pushing and holding the TWO up/down menu buttons at same time.
2. Menu window will show "OKI USER"
3. Scroll to " Engine Dialog Mode" is indicated. Push Enter button.
4. "Diagnostic Mode xx.xx.xx S-Mode is indicated.
5. Scroll to "NV-Ram initial" is indicated. Push ENTER.
6. Window shows "NV-Ram- Initial Table 1".
7. Push ONLINE and ENTER Buttons simultaneously and HOLD for 10 seconds after you see "Executing Reset" appear in menu window.
8. Restart printer.

All toner, drum, fuser and transfer figures return to 100%.

Worked for me when I had the same error. Hope it helps.

Aug 08, 2008 | OKI Printers & Copiers

1 Answer

Oki C9500 Printing Problem


Check the LED Head and LED Connection. The LED heads are interchangeable, BLK, Cyan, Magenta, Yellow.

Feb 15, 2008 | OKI C9500dxn Led Printer

1 Answer

Oki C9500 makes VERY LOUD clunking noises but prints fine...


The sound is most probably from one (or more) of the drum units. You can check by taking them out and trying to run the visible gears by hand. If you have spare drums, change them one at a time until you find the defective one.

Sep 04, 2007 | OKI C9500dxn Led Printer

Not finding what you are looking for?
OKI C9500dxn Led Printer Logo

Related Topics:

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Printers & Copiers Experts

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

SiNnA
SiNnA

Level 1 Expert

38 Answers

Dominion Computer...
Dominion Computer...

Level 2 Expert

269 Answers

Are you an OKI Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...