Question about PC Desktops

1 Answer

I have two cibox 17 inch lcd tft monitors and both have gone faulty within about a year. they come on for approximately 2 seconds then go off! if i look really closely at the screen though i can press the menu button and faintly see the menu screen.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Hi, I have the same problem, it happend once then i took it to bits and cleaned and reviewed all the conections then it worked for about a month, now it has done the same. i recommend taking off the back panel, and removing the power section cover, but be careful not to touch the capacitors as the pack a punch, then clean all the connectors and contacts, if i get more info on this then i will notify you.
I hope this helps
Thanks, Nick

Posted on Jul 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No video output


If your LCD TFT has both a DVI and a standard VGA video input then you need to select the correct video input on your monitor.

Dec 02, 2011 | Lenovo ThinkCentre M58p 250GB HDD PC...

1 Answer

Hello sir, i hav LG CRT 15" monitor. After turning on, its LED continuous blinks and power button does not work and displays nothing. so plz suggest me what should be deffect?


Any 15-inch CRT-style monitor should be replaced by a 15-inch or 17-inch LCD-style monitor. You can find "previously-owned" monitors for $30 to $50, which is less than taking your CRT monitor to a TV/video repair-shop for an *attempt* to get it repaired.

Oct 04, 2010 | PC Desktops

1 Answer

I use 17" TFT LCD monitor of HCL make. there is a blue straight line appears on my screen. please suggest what to do to resolve the problem.


change your screen resolutions two~three different settings and a different computer - lf the line appears in same position, it's most likely bad monitor.

Sep 22, 2010 | PC Desktops

1 Answer

My acer laptop with windows xp will not allow me to select the optimal resolution for my samsung moniter. How do I fix this?


The Samsung SyncMaster 730b is a 17-inch analog and digital TFT-LCD monitor delivering crisp, clean text and bright, vivid colors. This display offers a 600:1 contrast ratio, 300 cd/m2 brightness, 1280 x 1024 resolution, 160/160 degree viewing angle, scanning frequency of 30-81 kHz horizontal and 56-75 Hz vertical and 0.294mm pixel pitch
The SyncMaster 730b display offers the option of using either a digital or analog interface for viewing images and text. The Digital Video Interface (DVI) ensures a shaper, cleaner image and a more accurate representation of the original video source. Since video starts out digital in a PC graphics card, the digital output is directly interfaced to the digital input of the LCD panel and always provides the optimum quality image. In addition, no adjustments are required with a digital display, even when randomly changing resolutions. Input connectors for this display include 15-pin D-sub and DVI-D. Available in black, the SyncMaster 730b delivers a maximum of 16.2 million colors. The monitor is Windows Plug and Play DDC 2B compatible
The important stuff here would be the following:
(1) 30-81 kHz horizontal and 56-75 Hz vertical
(2) SyncMaster 730b delivers a maximum of 16.2 million colors
(3) 1280 x 1024 resolution
nVidia card settings should not exceed these monitor parameters. The monitor is not designed for more performance output without increasing liability toward failure. ?. Put your card settings, under the nVidia tab, at the following:
(a) Refresh rate set at 75 Hz
(b) Set colors at 16 million
(c) Set resolution slightly less than 1280 x 1024
It?s quite possible your monitor is at fault, but start with its optimal parameter settings for the display card first. The display card probably exceeds the monitor?s capabilities. Hopefully, this will stabilize your PC session and the blank outs cease if hardware is not faulty

May 23, 2008 | PC Desktops

1 Answer

HP Flat Panel Monitor is dead!


The power supply within the monitor has probably expired. HP doesn't do spare parts for their TFT monitors as they are Full Unit Replacement items (if in warranty).

Jan 25, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...