Question about iLO MP3 Player

3 Answers

Why will my mp3 not load songs from windows xp

Download songs. when i plug it in computer doesn't recognize it

Posted by on

  • xXwallygirlX Oct 30, 2008

    i cant download songs

  • yokonashiwa Nov 15, 2008

    I plug in the mp3 player and the computer knows it is there, but my music programs that I have use doesn't show that it can be synced. HELP ME PLEASE!!!!!!

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I went to my control panel and then selected the Printers and Other Hardware link. Once there, I clicked on Add Hardware in the Upper Left hand corner. Once you have done that, you then will get a list of devices on your computer. Look until you see mp3 device. If it has a yellow triangle with an exclamation mark in it, then there is a problem. Right click on it and tell it to update driver. Once you have done that mark the Find Automatically and your computer will begin searching for a new device driver. This should allow you to then start updating your mp3 player. It worked for me.

Posted on Nov 15, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do i download sd card into 256 ilo mp3

Posted on Nov 13, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 26 Answers

DOWNLOAD THE CD FOR APPLE OVER AGAIN IT MIGHT HELP


:-)

Posted on Nov 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't download songs on to my mp3 player


is this player being recognized by windows? you should be able to open my computer and see your MP3 Player and then just drag your songs to it. Have you installed the software that came with your player. Check the manufacturers website and see if there is a new updated version, driver for your player. I have a Zen from creative and I am able to just plug me player into my computer and drag the songs I want to the player without using the creative software.

Dec 29, 2008 | Coby MPC895 MP3 Player

2 Answers

Download from audible


hi,

Have you tried connecting to the net and then continue to subscribe??

Feb 09, 2008 | SanDisk Sansa Clip MP3 Player

Tip

Song Formats for Mp3 Players Explained, Part I By Tha Mp3 Doctor I have seen...


Song Formats for Mp3 Players Explained, Part I
By Tha Mp3 Doctor
I have seen quite a few threads around Fixya in which the stated problem is that the Mp3 or Digital Audio Player will not load the songs; will appear to load the songs but will not actually play them in the Mp3 player once disconnected from computer; will skip the songs on the player, or show only “0:00” for file length; songs “disappear” all of a sudden (although this particular problem can be caused for many reasons not covered in this article); your store-bought/burned/ripped CD’s will not load into your Mp3 player; or get the error message “File Format Not Supported.” All of these problems occur because the user is trying to download a song format that the player does not recognize. Every music file is in a certain format. The most common music file formats are Mp3, WMA, AAC, WAV, RA, etc. Each Mp3 player only recognizes a certain number of these formats. Every Mp3 Player is different. You will have to check your Mp3 player’s product specifications (specs) or user’s manual to find out which formats your particular Mp3 player recognizes. When you try to download or sync the wrong file format, you will get one of the errors that I mentioned above.
First things first. If you want to know what file type you have, then you must find the location of the individual music file on your computer, right click the title of the song, and select the option “Properties” from the menu. If you do not know how to do this, you will need to contact the manufacturer of your computer or go to www.microsoft.com. For all types of file except RA, RAX, and WMA, the “General” Tab under Properties will auto-populate. If your computer recognizes the file format, it will say something like “MPEG-3,” “Windows Media Audio” (Windows Media Player), “Real Audio” (Real Player or Real Network’s Audio), or “Advanced Audio Coding” (iTunes) or some other such designator. If your computer does not recognize the format, then you will just see a generic “Audio File,” and will have to download additional software. With WMA and some RAX files, there will also be a “License,” “Digital Rights Management,” or “Media Usage Rights” tab. I will explain these licensing tabs later, in the discussion on WMA files.
For every type of file other than WMA, the format error is pretty straightforward. You are trying to load a completely incompatible file format that is not recognized by the Mp3 player. To give you an example, there are currently no Philips GoGear Mp3 players that will load songs from the iTunes music service. The reason they will not transfer or play correctly is that the GoGear is that iTunes gives the users their songs in .AAC format. The GoGear cannot recognize .AAC format. To resolve this problem, you will have to convert the AAC song file into Mp3 format, or some other format that the GoGear recognizes (Note to the law-abiding: converting a copyright protected file into another format might be illegal. If you are concerned, I would just re-download the same song in Mp3 or another recognized file format – this will require a separate music service other than iTunes, in this example).
Please Read Part II for Critical Information...

on Jun 09, 2008 | iRiver H340 MP3 Player

1 Answer

Songs won't go on mp3 player.


Song Formats for Mp3 Players Explained, Part I
By Tha Mp3 Doctor
I have seen quite a few threads around Fixya in which the stated problem is that the Mp3 or Digital Audio Player will not load the songs; will appear to load the songs but will not actually play them in the Mp3 player once disconnected from computer; will skip the songs on the player, or show only “0:00” for file length; songs “disappear” all of a sudden (although this particular problem can be caused for many reasons not covered in this article); your store-bought/burned/ripped CD’s will not load into your Mp3 player; or get the error message “File Format Not Supported.” All of these problems occur because the user is trying to download a song format that the player does not recognize. Every music file is in a certain format. The most common music file formats are Mp3, WMA, AAC, WAV, RA, etc. Each Mp3 player only recognizes a certain number of these formats. Every Mp3 Player is different. You will have to check your Mp3 player’s product specifications (specs) or user’s manual to find out which formats your particular Mp3 player recognizes. When you try to download or sync the wrong file format, you will get one of the errors that I mentioned above.
First things first. If you want to know what file type you have, then you must find the location of the individual music file on your computer, right click the title of the song, and select the option “Properties” from the menu. If you do not know how to do this, you will need to contact the manufacturer of your computer or go to www.microsoft.com. For all types of file except RA, RAX, and WMA, the “General” Tab under Properties will auto-populate. If your computer recognizes the file format, it will say something like “MPEG-3,” “Windows Media Audio” (Windows Media Player), “Real Audio” (Real Player or Real Network’s Audio), or “Advanced Audio Coding” (iTunes) or some other such designator. If your computer does not recognize the format, then you will just see a generic “Audio File,” and will have to download additional software. With WMA and some RAX files, there will also be a “License,” “Digital Rights Management,” or “Media Usage Rights” tab. I will explain these licensing tabs later, in the discussion on WMA files.
For every type of file other than WMA, the format error is pretty straightforward. You are trying to load a completely incompatible file format that is not recognized by the Mp3 player. To give you an example, there are currently no Philips GoGear Mp3 players that will load songs from the iTunes music service. The reason they will not transfer or play correctly is that the GoGear is that iTunes gives the users their songs in .AAC format. The GoGear cannot recognize .AAC format. To resolve this problem, you will have to convert the AAC song file into Mp3 format, or some other format that the GoGear recognizes (Note to the law-abiding: converting a copyright protected file into another format might be illegal. If you are concerned, I would just re-download the same song in Mp3 or another recognized file format – this will require a separate music service other than iTunes, in this example).
Please Read Part II for Critical Information...

Sep 20, 2008 | MP3 & Digital Media Players

2 Answers

There are no instructions in the instruction manual as to how I transfer songs to the MP3 player. Sorry, but I need MP3's' for Dummies. It's the JX-MP102. PLEASE HELP!


Just bought the JX-MP102 find it difficult to use but was able to download songs from a windows xp laptop - plug the mp3 player into the usb port and turn on just as you would for playing music its screen should light up and the computer will pop up a screen with several options click to start windows explorer and from there you can got to place holding music files and copy them the disk letter which represents  the MP3 player. On my machine my main files are on the C disk and a new D disk pops up for MP3 player. I also have a windows vista machine and it also recognizes the player as a new disk drive just like a flash drive.  Unfortunately I can the player to work for a few minutes at best right now even with the music files successfully loaded and playing so I may return it tomorrow. Hope you have better luck.
   rvwill1930

Jul 05, 2008 | MP3 & Digital Media Players

2 Answers

Computer does not recognize my sansa clip


Same problem, my sansa was working great did a windows XP update. Now my it won't show up on my computer.

OS: Windows XP Media Ed
HP Media Computer.

Thanks a lot Microsoft, messing a working machine!

Apr 18, 2008 | SanDisk Sansa E280 MP3 Player

1 Answer

Computer does not recognize the rd1080.. cannot download any songs


What system are you using? is it Window xp if should recognize it if its windows 98 you need to download the drivers from rca there you can get the drivers and newest firm ware for your device heres a link for you http://support.rcaaudiovideo.com/select.aspx?u=downloads

Nov 05, 2007 | RCA Lyra RD1080 MP3 Player

2 Answers

Device unrecognizable on computer


i have windows xp in my pc still my av10 is not being detected and its no turning on can u give any solution

Sep 27, 2007 | MP3 & Digital Media Players

Not finding what you are looking for?
MP3 & Digital Media Players Logo

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top iLO MP3 & Digital Media Players Experts

laikexpert
laikexpert

Level 3 Expert

281 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

kakima

Level 3 Expert

96396 Answers

Are you an iLO MP3 and Digital Media Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...