Question about E-Machines (308714) Motherboard

1 Answer

Need help cord that come from power button i pulled out but cant remeber way they go back it

Posted by on

  • Joseph Wampler
    Joseph Wampler Oct 30, 2008

    emachine w3507 cord from power button way to put back in cant remeber way there were in 3 cords

  • balf9 Nov 05, 2008

    the 3 cords from the front of the tower came of themotherboard and i dont know which connector goes into which pins



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 172 Answers

The pin arrangement is 4 pins and pins.
From left top row (4 pins) first 2 are power led, next 2 are power switch, next 1 is empty
from left bottom row ( 5 pins ) first 2 are hdd, next 2 are reset, next 1 is empty.
The connectors for the power led and the hdd produce a light, if they don't produce a light, power off your pc and switch the cables round the other way and power on again.

Posted on Nov 23, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hi, i have a clp289 slimbook i need to reset it cant remeber my pin.

will need a clean load
i bet.
never lose pw.
hint write them down.....?????

Jan 29, 2017 | Power Computers & Internet

1 Answer

Reseting router back to factory default

There is a reset button on the back of the router. Press and hold the button (it's recessed, probably near the power cord connector) for 30 seconds. This will reset the router back to factory settings. Go ahead and pull the power cord after you reset and let the router power cycle.

If you found this answer helpful, please remember to leave positive feedback. If you need more assistance, please let me know.

Thank You,


Feb 26, 2011 | Belkin (F5D9230-4) Wireless Router...

1 Answer

My "hp pavilion a220n" won't power on. ... I was

Pull the power cord out and press the power button on the PC to drain the power for 10 seconds. Then plug the power cord back in and turn the computer on. If still does not work, then the power supply may be blown out and needs replacement.

Dec 23, 2010 | HP Pavilion a220n (DK218A#ABA) PC Desktop

1 Answer

When i push the power button it just runs very fast and does not boot up?

reset bios , when you push the power button klik del on keybord and try to go in bios, set it to optimal configuration, if you can't do that, remove power cord from your pc open case ,and you will see a litle battery (silver batery like on watches just bigger) pul it out , wait for about 10 sec, put it back in., plug your power cord and start your pc.. remeber to pull you power cord .. if you don't you can damage your pc with static eletricity...cheers

Feb 20, 2010 | HP Pavilion a1250n (EG194AA) PC Desktop

1 Answer


Right click on printer Icon, and select "Enable". First Unplug from PC, & Power, Put power back on, wait a minute, plug into USB, wait a minute, select Icon, Enable. Also you can right click the Icon, and select Properties too.

Feb 05, 2010 | HP Deskjet F335 All-In-One InkJet Printer

1 Answer

It just says E on my printer and said it had a paper jam whichi have cleared and it still says E. I have turned it on and off and pressed lots of buttons and i cant get it off

Try resetting the printer:
  1. Press the On button to turn off the unit.
  2. Disconnect the power cord from the back of the unit.
  3. Connect the power cord to the back of the unit.
  4. Press the On button to turn on the unit.
If a light is on at the "inkdrop", you may need to replace the cartridge.

Hope this helps.

Aug 17, 2009 | HP DeskJet F380 All-In-One Printer

2 Answers

I cant reach the paper that is jamed what do i do

Have you been able to take the door off at the rear?

If you haven't tried this before, there is usually a door at the rear of the printer, with two circular recesses. Push the latches in and lift the door out, then see if you can reach some or all of your stuck paper.

Nov 16, 2008 | HP OfficeJet 7410 All-In-One InkJet...

1 Answer

Computer wasn't working and now am unable to reconectt alation i cant remeber the password how do i reset the password so i could access my router


You can do a reset and it will reset to the default password which is admin. the reset button is right next to the power connector. Hold it infor 30 seconds, while holding it, pull the power connector out then hold it for 15 seconds longer. . afterwards , release the rest button and put the power connector back in. the go to the setup page, and login with the password admin (no need for username.)


Nov 08, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

System turns on however hard drive will not cycle nor will mouse or key board activate

Turn power off and unplug power from computer.
Unplug printers,backup drives and speakers.
Open case and unplug power supply from the board.
plug power cord back in press the power button.
Of course nothing will happen.
unplug power cord again.
plug power supply back into the board.
plug power cord backup and press power switch.
If nothing happens unplug power cord again.
pull out your memory sticks and plug cord back in and press power button.
Of course not much will happen.
But really something is happening to your computer so continue.
Pull power cord and replace memory sticks.
replace power cord and press power switch.
Continue this pulling out pci cards one at a time until you find out what the problem might be.
Try different keyboards and mice too.
Good Luck

Oct 27, 2008 | Intel Computers & Internet

2 Answers

My phillip 51 inch will not turn

this happened to me once i think the problem is that the button is used so infrequently that it sticks try pushing it very hard as many times as needed and id and when it comes back on dont use the button anymore just stick to the remote

Feb 14, 2008 | Philips 51PW9303 51" Rear Projection...

Not finding what you are looking for?
E-Machines (308714) Motherboard Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18408 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides