Question about IBM 4528-n01 Printer

1 Answer

Maint kit install and page count

How do I install; my new maintenance kit? I am hoping there are quicker instructions than taking the whole printer apart but I cannot see. Also, how do I get my page count and tehn reset page count?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Pretty easy, the maintenance kit consists of a transfer roller (black roller that sits underneath toner cartridge), charge roller (sits above toner cartridge), fuser (rear of printer behind two plastic covers), and paper feed rollers. The maintenance kit should have details with diagrams.

To reset
To reset the Maintenance counter, turn off the printer.
Press and hold both Select & Return while powering on the printer.
Hold until display reads 'Performing Self Test" then let go of the buttons.
If the printer displays "80 Maintenance Due" Press the Go Key.
Press the right Menu Key and scroll to Reset Maintenance Counter.
Press the Select Key. Press the Select Key again to reset the counter.
When the reset operation is complete, press the right Menu key to exit Configuration Menu and press Select.
Printer will save the settings, IPL and come back to Ready.

Posted on Nov 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

T630 clear counter


The following will reset the maintenance count after you install the maintenance kit, you can not reset the printer total page count. Press and hold down the [Select] and [Return] keys while powering on the printer, hold these buttons until the display reads "Performing Self Test." If the display readds "80 Schedules Maintenance", press the [Go] to continue past this message and access the Configuration Menu. Press the menu button until the display reads "Reset Maint Cnt" on the second line of the display and press the [Select] button. The top line of the display should now read "Reset Maint Cnt" and the second line will read "Reset" and press the [Select] button. This will reset the counter. To exit out of the "Configuration Mode" cycle the power.

Apr 15, 2013 | Lexmark T630 Laser Printer

1 Answer

How to reset hp laserjet m5035 maintenance kit problem


When page count approaches 200,000 pages printed, the device alerts to order a maintenance kit. The message can be temporarily cleared by using the Clear Maintenance Message item on the Resets submenu under Administration. When the page count reaches 200,000, the message can no longer be cleared and the maintenance kit must be installed. To check the number of pages that the device has printed since new maintenance-kit components were installed, print either a configuration page or a supplies-status page. The print-engine maintenance kit includes the following items:
  • Fuser
  • Rollers (transfer, feed and separation)
  • Separation pads
  • Installation instructions

Mar 02, 2011 | Office Equipment & Supplies

1 Answer

I have an Hp laserjet 4200 printer and would like to know what regular maintenance I should be undertaking,and parts checking.


A maintenance kit(feed rollers, transfer roller, fuser) should be installed every 200,000 pages.
If you look at the "configuration" page, left column about 1/4 of the way down you will get the page count and when the last kit was installed.

The kit will come with instructions for installation and resetting the page count.
It is an easy printer to maintain.

Feb 08, 2011 | HP LaserJet 4200n Printer

2 Answers

HP laserjet 3600 error message 50.9 Fuser Error


Thank you for the inquiry.
Yes you will probably have to replace the fuser. If this is a new printer still under warranty and the page count has not reached the service life of the fuser, contact HP for warranty replacement. Once the new fuser in installed you will need to restore the service count.
nav?h_pagetype=z-001&h_lang=en&h_cc=us&h_client=z-a-r1002-1&h_product=501046
Fuser Kit Part Number: (Sometimes Called a Maintenance Kit)
RM1-2665 This fuser is compatible with the following printers: HP Color LaserJet 2700, 3000, 3000N, 3000DN, 3000DTN, 3600, 3600N, 3600DN,
3700_parts_fuser.jpg
Link to Installation pictures and instructions:
http://printertechs.com/tech/mkinst/3000/mk-3000-2fuser.php
Restoring the maintenance count after installing new fuser.

This printer tracks the number of pages printed on the fuser, and a reminder message will appear when the fuser reaches a certain page count. The message will instruct you to replace your fuser. Whenever you install a new fuser, you should reset the fuser page count so the warning message will not appear prematurely.


To reset the fuser count :
1. Press MENU to enter the MENUS.
2. Press Down arrow to highlight Configure Device.
3. Press Checkmark to select Configure Device.
4. Press Down arrow to highlight RESETS.
5. Press Checkmark to select RESETS.
6. Press Down arrow to highlight RESET SUPPLIES.
7. Press Checkmark to select RESET SUPPLIES.
8. Press Down arrow to highlight NEW FUSER KIT.
9. Press Down arrow to select NEW FUSER KIT.
10. Press Down arrow to highlight YES.
11. Press Checkmark to select YES.

The fuser count will be reset and then the printer is ready to use.


Thank you for being a FixYa Valued Customer.
Hope this helps helps. Please keep us updated and remember to rate this answer.


TF






Jan 19, 2011 | HP LaserJet 3600 Printer

1 Answer

How can i show hp lj p4515n printer new maintenance kit 100%, i can't show new mainteness kit 100% in printer.


After you install the maintenance kit, power cycle the printer.
As soon as it starts counting memory, press and hold the OK button until all three control-panel lights flash once and then stay on solid.
Release the OK button and press the up arrow to scroll to NEW MAINTENANCE KIT.
Press OK to reset the counter

Dec 06, 2010 | HP P4515n LaserJet Printer

1 Answer

My paper jams up and crinkles when it gets under the ink cartrige the machine says remove cartridge, I do, I take out the jammed paper click go and it does it again. It printed up to page 45 of 50 and now...


Kindly check the Maint Count in the Configuration Menu by turning off the printer, then pressing and holding the Select and the Return buttons while turning on the printer. Select Maint Count Value. If it reached 300,000, maintenance kit should be replaced. If it's below 300,000, fuser and redrive may need to be replaced.

Aug 10, 2010 | Lexmark Optra S 1650 Laser Printer

1 Answer

Reset maint counter


This counter is reset by the servicer after a 80 Scheduled Maintenance message displays
(300K copies) and a maintenance kit is installed.
To view the maintenance page count:
1. Select Maintenance Count Value from the Configuration menu.
2. Press Return to go to the previous menu.
To reset the maintenance page count to zero:
1. Select Reset Maintenance Count Configuration menu.
2. Pressing Select resets the maintenance page counter to zero.
Reset Maintenance Count Saved displays momentarily. When the reset operation is complete,
the menu returns to the Printer Setup Reset Maintenance Count screen.

Page 3-17 of IBM's service guide

Mar 25, 2010 | IBM Infoprint 1352 Laser Printer

1 Answer

Where is the maintenance kit on hplaserjet 4345mfp


After printing 215,000 pages, the MFP alerts you to order a maintenance kit. The message can be
temporarily cleared for approximately 10,000 pages by using the CLEAR MAINTENANCE
MESSAGE
item on the RESETS submenu. When the page count reaches 225,000, you can no
longer clear the message and you must install the maintenance kit. To check the number of pages
that the MFP has printed since new maintenance-kit components were installed, print either a
configuration page or a supplies-status page
the maintenance kit is Fusing element , pickup rolls for all trays, and transfer corona
To reset the maintenance-kit counter
1
Turn the MFP off and then on.
2 When the memory count appears on the control-panel display, press and hold 6 until all three
LEDs flash once and then stay on. (This might take up to 20 seconds.)
3 Release 6 and then press 3.
4 Press 6 to select NEW MAINTENANCE KIT.
5 The MFP completes its initialization sequence. The maintenance-kit counter is automatically reset.

Mar 24, 2010 | HP LaserJet 4345mfp Printer

2 Answers

Lexmark T642


There is a great video that shows step by step how to install the fuser, transfer roller, charge roller, pick up tires and then reset the 80 Scheduled maintenance message

Apr 03, 2009 | Lexmark T642 Laser Printer

1 Answer

DELL W5300 PRINTER - GETTING THE MAINTENANCE COUNT


It is like your oil light coming on. It means the printer has reached its pages count where they recommend changing the maint kit. (usually new fuser / rollers). If print quality good - let it go - it will work for another 10,000 pages or so. If print quality bad (streaks and rough spots) it needs a new fuser. After replacing the kit you reset the count to zero and it start counting again.

Feb 27, 2009 | Office Equipment & Supplies

Not finding what you are looking for?
IBM 4528-n01 Printer Logo

544 people viewed this question

Ask a Question

Usually answered in minutes!

Top IBM Office Equipment & Supplies Experts

James Cagle
James Cagle

Level 2 Expert

453 Answers

Toby
Toby

Level 1 Expert

34 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you an IBM Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...