Question about Acer Aspire™ T180 PC Desktop

1 Answer

Startup repair cannot automatically repair

My son was using the computer.It stopped half way through and tried to restart it but then came up with start up repair and then just won't. Even when I try to start up in safe mode, I get a blue screen that talks about crash dumping then it goes to startup repair. I am totally reliant on the computer and don't have a clue what to do next. Even if i look in the advanced options it won't do a system restore. Can anyone help me?

Posted by on

  • footballcd Oct 30, 2008

    It goes off so quickly its hard to write down but it was something like ox000000F4. Am i looking at the right thing? I can only look at this screen if I keep turning the comp on and off cos it is not up long enough to read the whole thing.

  • footballcd Oct 30, 2008

    did look again. said OX000000F4

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 275 Answers

Whats the stop code on the blue screen?

Posted on Oct 30, 2008

  • Ali Khambati
    Ali Khambati Nov 02, 2008

    you have installed service pack 3 right ?

    and after that u are getting this msg

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

System disc


What type of system disc ?
operating system disc
Create a Windows 7 System Repair Disc:
http://www.sevenforums.com/tutorials/2083-system-repair-disc-create.html
"This will show you how to create a Windows 7 system repair disc to use to boot to the system recovery options if you don't have a Windows installation disc, can't find your Windows installation disc, or can't access the recovery options provided by your computer manufacturer."
If you do not have access to either disc: Windows 7 - Repair Disc download

http://neosmart.net/blog/2009/windows-7-system-repair-discs/

a) Insert the Windows 7 System Repair DVD or Installation DVD and reboot.

b) Select the correct keyboard input method and click 'Next'.

Note: If you are using the Windows7 Install DVD then at the 'Install Now' prompt (Do not pick the Install Now option) instead choose the 'Repair your computer' option located in the lower left of the dispay.

c) The System Repair tool will search for a valid operating system and will report that "Windows found problems with your computer's startup options.

Do you want to apply repairs and restart your computer?"

d) Click 'Repair and restart' and reboot again to the Windows 7 System Repair environment.

e) Click 'Next' at the keyboard selection prompt and when the 'System Recovery Options' screen appears verify that the "Use recovery tools that can help fix problems starting Windows" is selected.
Note that on your Dual Boot system there now should be only one operating system listed. Click the 'Next' button.

f) Now from the menu list select the 'Command Prompt' option.
g) At the DOS prompt type the following three commands:
bootrec.exe /fixmbr
bootrec.exe /fixboot (may return an 'Eliment not found' message)
bootrec.exe /RebuildBcd

h) Close the command prompt window and click the 'Startup Repair' option.

i) The repair process may take some time, so wait until the process completes at which point you will see two messages "Windows cannot repair this computer automatically" and "Startup Repair cannot repair this computer automatically".

These messages are the result of the radical changes made by removing the other drive. Ignore the Send/Don't send options.

J) Close this message window by clicking on the X in the upper right corner of the Send/Don't send window.

Next click on the 'View advanced options for system recovery and support' option and from the main menu once again click 'Startup Repair'.

This time the repair process may only that a few seconds and when prompted "Startup Repair could not detect a problem", click 'Finish' and run the 'Startup Repair' option one more time, click 'Finish', and then remove the System Repair DVD and click 'Restart'.
Reboot the computer.

Hope this helps.


http://neosmart.net/blog/2008/download-windows-vista-x64-recovery-disc/
vista recovery disk
not longer free

http://systemdiscs.com/?utm_source=neosmart&utm_medium=article&utm_campaign=Vista_Recovery

Mar 06, 2014 | HP Compaq Presario SR1750NX PC Desktop

1 Answer

Printer spooler service not running


The spooler is not on your printer it is in the Windows folder on your computer and is used to hold documents whilst preparing to print.
Normally this service is set to start automatically and there are a number of reasons why it may of stopped but try this:
Right click on "Computer" in your Menu and then left click on "Manage".
In the page that appears click "Services and applications" and Click "Services"
Navigate down to "Print Spooler" and double click on that line.
A box should appear showing properties of the Spooler.
It should show
"Startup Type = Automatic"
"Service Status = Running"
If neither of these are true then change the Startup type to Automatic
and click on the "Start Button"
The service will then either start or tell you why it cannot start.

Nov 21, 2013 | LG Computers & Internet

1 Answer

When I turn on the computer it says boot mgr is missing. I guess I totally messed up when I tried to do a full system recovery. The discs I have are from geek squad there is tow of them.


An operating system would have been nice ?

How to Create a Windows 7 System Repair Disc:
http://www.sevenforums.com/tutorials/2083-system-repair-disc-create.html


"This will show you how to create a Windows 7 system repair disc to use to boot to the system recovery options if you don't have a Windows installation disc, can't find your

Windows installation disc, or can't access the recovery options provided by your computer manufacturer."

or

If you do not have access to either disc: Windows 7 - Repair Disc download
http://neosmart.net/blog/2009/windows-7-system-repair-discs/


a) Insert the Windows 7 System Repair DVD or Installation DVD and reboot.


b) Select the correct keyboard input method and click 'Next'.


Note: If you are using the Windows7 Install DVD then at the 'Install Now' prompt (Do not pick the Install


Now option) instead choose the 'Repair your computer' option located in the lower left of the dispay.


c) The System Repair tool will search for a valid operating system and will report that "Windows found problems with your computer's startup options. Do you want to apply repairs and restart your computer?"


d) Click 'Repair and restart' and reboot again to the Windows 7 System Repair environment.


e) Click 'Next' at the keyboard selection prompt and when the 'System Recovery Options' screen appears verify that the "Use recovery tools that can help fix problems starting Windows" is selected.
Note that on your Dual Boot system there now should be only one operating system listed. Click the 'Next' button.


f) Now from the menu list select the 'Command Prompt' option.


g) At the DOS prompt type the following three commands:


bootrec.exe /fixmbr


bootrec.exe /fixboot (may return an 'Eliment not found' message)


bootrec.exe /RebuildBcd


h) Close the command prompt window and click the 'Startup Repair' option.


i) The repair process may take some time, so wait until the process completes at which point you will see two messages "Windows cannot repair this computer automatically" and "Startup Repair cannot repair this computer automatically".


These messages are the result of the radical changes made by removing the other drive. Ignore the Send/Don't send options.


J) Close this message window by clicking on the X in the upper right corner of the Send/Don't send window. Next click on the 'View advanced options for system recovery and support' option and from the main menu once again click 'Startup Repair'.


This time the repair process may only that a few seconds and when prompted "Startup Repair could not detect a problem", click 'Finish' and run the 'Startup Repair' option one more time, click 'Finish', and then remove the System Repair DVD and click 'Restart'. Reboot the computer.


hope this helps

Nov 24, 2012 | eMachines ET1810-01 PC Desktop

1 Answer

I need to find a set up disc


What operating system set up disc are you referring to ?

Create a Windows 7 System Repair Disc:



http://www.sevenforums.com/tutorials/2083-system-repair-disc-create.html



"This will show you how to create a Windows 7 system repair disc to use to boot to the system recovery options if you don't have a Windows installation disc, can't find your Windows installation disc, or can't access the recovery options provided by your computer manufacturer."

If you do not have access to either disc: Windows 7 - Repair Disc download

http://neosmart.net/blog/2009/windows-7-system-repair-discs/


a) Insert the Windows 7 System Repair DVD or Installation DVD and reboot.


b) Select the correct keyboard input method and click 'Next'.


Note: If you are using the Windows7 Install DVD then at the 'Install Now' prompt (Do not pick the Install Now option) instead choose the 'Repair your computer' option located in the lower left of the dispay.


c) The System Repair tool will search for a valid operating system and will report that "Windows found problems with your computer's startup options.

Do you want to apply repairs and restart your computer?"


d) Click 'Repair and restart' and reboot again to the Windows 7 System Repair environment.


e) Click 'Next' at the keyboard selection prompt and when the 'System Recovery Options' screen appears verify that the "Use recovery tools that can help fix problems starting Windows" is selected.
Note that on your Dual Boot system there now should be only one operating system listed. Click the 'Next' button.


f) Now from the menu list select the 'Command Prompt' option.

g) At the DOS prompt type the following three commands:

bootrec.exe /fixmbr

bootrec.exe /fixboot (may return an 'Eliment not found' message)

bootrec.exe /RebuildBcd


h) Close the command prompt window and click the 'Startup Repair' option.


i) The repair process may take some time, so wait until the process completes at which point you will see two messages "Windows cannot repair this computer automatically" and "Startup Repair cannot repair this computer automatically".


These messages are the result of the radical changes made by removing the other drive. Ignore the Send/Don't send options.


J) Close this message window by clicking on the X in the upper right corner of the Send/Don't send window.

Next click on the 'View advanced options for system recovery and support' option and from the main menu once again click 'Startup Repair'.


This time the repair process may only that a few seconds and when prompted "Startup Repair could not detect a problem", click 'Finish' and run the 'Startup Repair' option one more time, click 'Finish', and then remove the System Repair DVD and click 'Restart'. Reboot the computer.


http://windows-xp-pro-startup-disk.soft32.com/free-download?gclid

windows xp pro start up disc


http://systemdiscs.com/?utm_source=neosmart&utm_medium=article&utm_campaign=Vista_Recovery
vista recovery disc

Hope this helps.

Nov 20, 2012 | Computers & Internet

1 Answer

System disks startup


Create a Windows 7 System Repair Disc:



http://www.sevenforums.com/tutorials/2083-system-repair-disc-create.html



"This will show you how to create a Windows 7 system repair disc to use to boot to the system recovery options if you don't have a Windows installation disc, can't find your Windows installation disc, or can't access the recovery options provided by your computer manufacturer."

If you do not have access to either disc: Windows 7 - Repair Disc download

http://neosmart.net/blog/2009/windows-7-system-repair-discs/


a) Insert the Windows 7 System Repair DVD or Installation DVD and reboot.


b) Select the correct keyboard input method and click 'Next'.


Note: If you are using the Windows7 Install DVD then at the 'Install Now' prompt (Do not pick the Install Now option) instead choose the 'Repair your computer' option located in the lower left of the dispay.


c) The System Repair tool will search for a valid operating system and will report that "Windows found problems with your computer's startup options.

Do you want to apply repairs and restart your computer?"


d) Click 'Repair and restart' and reboot again to the Windows 7 System Repair environment.


e) Click 'Next' at the keyboard selection prompt and when the 'System Recovery Options' screen appears verify that the "Use recovery tools that can help fix problems starting Windows" is selected.
Note that on your Dual Boot system there now should be only one operating system listed. Click the 'Next' button.


f) Now from the menu list select the 'Command Prompt' option.

g) At the DOS prompt type the following three commands:

bootrec.exe /fixmbr

bootrec.exe /fixboot (may return an 'Eliment not found' message)

bootrec.exe /RebuildBcd


h) Close the command prompt window and click the 'Startup Repair' option.


i) The repair process may take some time, so wait until the process completes at which point you will see two messages "Windows cannot repair this computer automatically" and "Startup Repair cannot repair this computer automatically".


These messages are the result of the radical changes made by removing the other drive. Ignore the Send/Don't send options.


J) Close this message window by clicking on the X in the upper right corner of the Send/Don't send window.

Next click on the 'View advanced options for system recovery and support' option and from the main menu once again click 'Startup Repair'.


This time the repair process may only that a few seconds and when prompted "Startup Repair could not detect a problem", click 'Finish' and run the 'Startup Repair' option one more time, click 'Finish', and then remove the System Repair DVD and click 'Restart'. Reboot the computer.


hope this helps

Nov 12, 2012 | Acer Aspire X1 Ax-1430g-uw30p Slimline...

1 Answer

I can't shut down my PC,It restarts again!


This behavior may occur if Windows stops responding during a typical operation or during the shutdown process. By default, the computer is configured to automatically restart when Windows stops responding. To view this setting, follow these steps:
  1. Click the Start button, right-click My Computer, click Properties, click the Advanced tab, and then click Settings under Start up and Recovery.
  2. Under System Failure, view the Automatically restart check box. If the Automatically restart check box is selected, Windows automatically restarts if the computer stops unexpectedly.
If your computer constantly restarts while you are using it, or if you are trying to shut down the computer after it has stopped unexpectedly, click to clear the Automatically restart check box. If you clear this check box, you receive an error message when the computer stops responding. This error message may describe the cause of the problem. You can also review the system log in Event Viewer to view the critical stop error that occurs when the computer restarts. For additional information, click the following article number to view the article in the Microsoft Knowledge Base: 308427 (http://support.microsoft.com/kb/308427/ ) HOW TO: View and manage event logs in Event Viewer in Windows XP To configure the way that Windows responds when the computer stops unexpectedly, follow these steps.

Note: You must be logged on as an administrator or a member of the Administrators group to complete this procedure. If your computer is connected to a network, network policy settings may prevent you from completing this procedure.
  1. Log on to the host computer as either an administrator or the owner.
  2. Click Start, and then click Control Panel.
  3. Under Pick a category, click Performance and Maintenance.
  4. Under the or pick a Control Panel icon section, click System.
  5. Click the Advanced tab, and then click Settings under Startup and Recovery.
  6. Click to select any one of the following check boxes under System Failure:
    • Write an event to the system log
    • Send an administrative alert
    • Automatically restart
    At last if nothing works then clear the "Star up"
  7. C:\Documents and Settings\All Users\Start Menu\Programs\Start up
    If you are not satisfied then If you are using XP then repair it.

thanks

Jul 05, 2010 | Computers & Internet

1 Answer

Compaq Presario SR12320M will not boot up Help


    • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you will need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
    • If your computer has more than one operating system, use the arrow keys to highlight the operating system you want to repair, and then press and hold F8.
  1. On the Advanced Boot Options screen, use the arrow keys to highlight Repair your computer, and then press ENTER. (If Repair your computer is not listed as an option, then your computer does not include Startup Repair as a preinstalled recovery option.)
  2. Select a keyboard layout, and then click Next.
  3. Select a user name and enter the password, and then click OK.
  4. On the System Recovery Options menu, click Startup Repair. Startup Repair might prompt you to make choices as it tries to fix the problem and, if necessary, it might restart your computer as it makes repairs.This should solve your problem

Aug 17, 2009 | Computers & Internet

1 Answer

My xps i don't come on when you boot up the CD light comes on for a second and then all I get is a black screen


When you boot up hold down the F8 button on your keyboard until you see start up options then click on start up repair
  • Startup Repair is a Windows recovery tool that can fix certain problems, such as missing or damaged system files, that might prevent Windows from starting. Startup Repair is located on the System Recovery Options menu, which is on the Windows Vista installation disc. If your computer has preinstalled recovery options, it might also be stored on your computer's hard disk. For more information, see Startup Repair: frequently asked questions and What are the system recovery options in Windows Vista? If your computer does not include Startup Repair, your computer manufacturer might have customized or replaced the tool. Check the information that came with your computer or go to the manufacturer's website.
  • Change restart settings in safe mode. If your computer is stuck in a loop where Windows fails, attempts to restart, and then fails again repeatedly, restart your computer in safe mode and select the Disable automatic restart on system failure checkbox. For more information, see Advanced startup options (including safe mode).
  • Reinstall. If no other options have solved the problem, and you are sure that your computer's hardware is functioning normally, you might need to reinstall Windows. A custom (clean) installation of Windows will permanently delete all of the files on your computer and reinstall Windows, so only use this option if all other recovery options have been unsuccessful. After the installation, you will need to reinstall your programs and restore your files from backup copies. For more information, see Installing and reinstalling Windows‌.

Jul 30, 2009 | Dell XPS One All-in-One TV Desktop with...

1 Answer

Error code BIOHD - 8 after drive testing


It a problem with the hard drive... try press esc at the logo and slect the boot device as hdd group and than the hdd.... try last kwon good configuration perform system recovery...

Apr 04, 2009 | Computers & Internet

3 Answers

Pc restarts automatically and unexpectedly


Good Evening Sunnyseber :


Hope that you are wellJ
You did not indicate the type of Operating System.
This document pertains to HP and Compaq computers with Windows Vista. If Windows Vista suddenly starts without warning, or restarts when you try to shut it down, it may be because your operating system is set to automatically restart when certain system errors occur. This feature of the Windows Vista operating system can be disabled. Use the information below to disable the Automatically Restart option. NOTE: In addition to the steps in this article, updating video card drivers is known to resolve many of the problems that can cause the computer to restart. Step 1: Disabling Automatically restart option to view error messages You can prevent the computer from restarting by turning off the Automatically Restart option:
  1. Click Start c00971562.gif .
  2. Right-click Computer , and click Properties
  3. Click Advanced system settings .
  4. Click the Advanced tab and select Settings in the Startup and Recovery section.
  5. Remove the check mark next to Automatically restart under System Failure .
  6. Click OK to close the Startup and Recovery window and click OK , again, and then close the System Properties window.
  7. Restart the computer. NOTE: The computer will no longer restart automatically when a problem occurs. Instead a blue screen appears with more useful information. You can now search for a resolution using the text from the error.


If I can be of further assistance, please let me know.

And, remember, always include the type of Operating System and the type of computer you own, when you submit your questions. It simply makes for much faster solutions.

Have a wonderful evening.

Sep 30, 2008 | HP Pavilion a1410n (ER890AA) PC Desktop

Not finding what you are looking for?
Acer Aspire™ T180 PC Desktop Logo

310 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...