Want to make Samsung V6800 multizone, can anyone help? Thanks
Unfortunately, I got the answer somewhere else, but I'm happy to pass it on. Here it is. I did the 'repeat button and the R4 number and the 9. And it works on the overseas ones and the local ones. I never saw a number in the top left hand corner, but it works.
"Make sure the player is switched on, and is at the Samsung logo
screen. Also check the tray is shut and that there's no disc in the
Now press the REPEAT button on the remote, followed by a five digit
code. This code is different depending on what region your player is
*currently* set to:
R1 - 29334
R2 - 38767
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462
So for example if you have an R2 player, press REPEAT-3-8-7-6-7.
If you've done this correctly (and your player is compatible with the
hack), you should see a number at the top left corner of the screen
corresponding to the current region.
Now, pressing any number from 1 to 6 will change to the corresponding
region. Or, press 9 for auto-region mode.
Next, press OPEN/CLOSE to open the tray, followed by Standby (or DVD
POWER) on the remote to close it and put the player into Standby mode.
The next time you turn your player on, the new region will be set.
Don't forget that if you want to hack it again, you'll need to use a
different code, as listed above. If it's currently set to region 9,
use the code for the last *proper* region you set it to."
Nov 25, 2009 |
Samsung DVD-V6800 DVD Recorder/VCR