Bush rf6685vpl flat screen tv going to standby only

My bush television wont turn on from standby? - Ask Me Fast

www.askmefast.com > Consumer Electronics > PlayStation > Wont

Hi my bush tele wont turn on it just keeps flashing at me standby light i ve changed the fuse .... Bush 22 inch tv dvd combi keeps restarting remote doesnt work.

22" bush tv wont turn on - The Student Room

www.thestudentroom.co.uk > ... > Sound and vision

The Student Room
Mar 12, 2012 - 12 posts - ‎7 authors
i got a new tv in january from argos and not had a problem with it until now. The problem is that it just stays on standby and wont turn on. the ...

Easiest TV repair - How to Fix Power [TV turns off, freezes ...

? 6:44
https://www.youtube.com/watch?v=OKklZpTGBGU
Apr 27, 2014 - Uploaded by Keith Fox
Hello my bush 22 inch tv is messed up Say if i go on it one day it..... it wont turn on from the power botton on the back not from the control ...

try switching on tv point remote at the tv pressing the menu/exit button and holding for 10/20 seconds hope this works for you

Good day!

That problem is usually happen when the TV is near the magnet or the speaker.


You have to do is demagnetized the screen of your TV using screen Degausser.

The picture looks like this:


Just plug-in the degausser and push the button in front of your TV.

If you did not have that degausser please buy it to this link:
http://shop.ebay.com/i.html?_nkw=degausser+&_cqr=true&_nkwusc=degauzer&_rdc=1

                                   Thank you and don't forget to rate my answer.

This sounds like a purity fault due to a magnetic build up, you will need to call out a service engineeer to have the TV de-gaussed firstly, which is a simple process. If this does not cure the fault, then the internal circuit for de-magnetising maybe a problem. The worst outcome can be the tube is at fault & would need replaced.

HELLO

Funnily enough I have been given a 21 inch standard Bush set with the same problem!

It's a DEGAUSSING fault. This means the deguss circuit in the TV is not operating as it should - probably a faulty positor. When you switch the TV on (NOT FROM STANDBY) the circuit that removes magnetism from the screen does not work correctly.

Switch it off, unplug the set from the mains for 30 minutes or so and try it again. If there is no change, contact a TV repair centre.

Make sure there are no hifi loudspeakers next to the TV or a radiator as this can have an effect too.

ALL THE BEST! (:-)

the tv is going in shutdown mode, is going to be power supply problem. check if your tv is under warranty because you will need a tv tech,

It seems that it is a degaussing problem. TV sets have a degaussing coil that when the TV is turned on , it automatically demagnetizes the screen. Never place any speakers or anything magnetic near or on top of your set. if you see swirls of color and like you say, wierd colors, it is that the screen is magnetized. Turn it on and off with the switch. Not the remote control. The degaussing coil only works by manually turn the switch on and off.

The picture tube of the tv has 3 color in CRT Red, Green, Blue. The red cathodeof tv set has no function, its either the resistor become higt resistance, that why u need a repairman to replace it.

A wire in the set got too hot and broke away, had to pay £140 to get it fixed, was told it's quite comman in alot of lcd tv's, as in all makes... I t should have been for a lcd bush 37 inch tv,,,not that it makes any difference it applies to all flat lcd screens, I just posted in the wrong part to begin with.. Sorry.

try the thermistor degauss coil,