Question about Nokia N95 Cellular Phone

1 Answer

Dear I flash the phone with N95 file and it seems the phone is different, but written on it N95,now is on but it can not work with human interface, All I want is Flash file four the china phone. buabin2020@yahoo.com is my E-mail.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I cant help but loads of people including e have problems with the n95

Posted on Oct 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to valid certificate on my nokia 5130c xpress music


If you really want to install the valid certificate, you need to update / flash your phone.So, I've given you some procedure follow it and do it by yourself.

First download and install Pheonix from this link. Nokia Phoenix Service Software 2011 - Download secondly Download flash file from this link 5130 flash file and install it to C / program files/pheonix.. after finished this installation open pheonix Interface. Inside the interface at the> top left <there you see "File" click there and choose "open file" and then select the approprait Product type i.e "which is written on the back panel inside the battery of every Nokia(Type RM-000).After doing this again at the left top count from "File"1..2..3..the 4th one is "Flashing" press there, when you click there you'll see three sub-menus, just select the "Firmware Update" again you'll see another interface. Look at the product code there should be blank and put your "mouse tool" at the straight end from the "Product Code" there is a Button and choose the code which is written in the back side of your phone. e.g CODE:0000000.if the same code does not found just take one which is higher. After this you can see "Dead phone USB flashing" click that box. Now this is the last stage... Connect your phone with the USB to your PC and let the driver install ...wait for a moment.(If your phone working).Lastly after just finished (In case your phone is Dead, unable to switch on in normal mode start from here) Connect the phone to pc without powering...insert good battery and Click the "Referbish" button after this, a message will prompt you "press power botton" etc. insert charger or press it and wait until the phone will Restart automatically in normal mode 10-15 minutes.Note: during you select the product code choose this 0579014: RM-495 CTR SEAP MS SILVE BENGALI BANGALA.If you cannot understand just leave a Comment. thanks for visiting fixya. Good luck.

Feb 28, 2012 | Nokia Cell Phones

1 Answer

Screen blank only backlight working nothing shows on screen. switches on


It seems that your phones firware has corrupted.you musttake it to the service store or if you are good enough with computers,followthese instructionsFirst download and install Pheonix. NokiaPhoenix Service Software 2011 -Download secondly Download flash file from this link Nokiaflash fileandinstall it to C / programme files/pheonix..afterfinishing this installation open pheonix Inside theinterface at the> left top File" click there and choose "openfile" and then select the appropriate Product type i.e"whichis written in the back banel inside the battery of every Nokia(Type RM-000).Afterdoing this again at the left top count from "File"1..2..3..the 4thone is "Flashing" press there when you click there you'll seethreeicon just select the "Firmware Update" again you'll seeanother interface .Look at the product code there should be blank and put your "mousetool" at the straight end from the "Product Code" thereis a Botton and choose the code which is written in the back sideof your phone. e.g CODE:0000000.if the same code does not found, justtake one.After this you can see "Dead phone USB flashing" clickthat box .Now this is the last stage... Connect your phone with the USBtoyour PC and let the driver install ...wait for a moment.(If yourphone working).Lastly after just finished (In case your phone isDead,unable to switch on in normal mode start from here) Connect thephone to pc without powering...insert good battery and Click the "Referbish"afterthis, a message will prompt you "press power botton"press it and wait untill the phone will Restart automatically

Oct 26, 2011 | Nokia X3 Cell Phone

1 Answer

Phone startup failed. contact retailer


It seems that your phones firmware has corrupted.you musttake it to the service store or if you are good enough with computers,followthese instructionsFirst download and install Pheonix. NokiaPhoenix Service Software 2011 -Download secondly Download flash file from this link Nokiaflash fileandinstall it to C / programme files/pheonix..afterfinishing this installation open pheonix Inside theinterface at the> left top File" click there and choose "openfile" and then select the appropriate Product type i.e"whichis written in the back banel inside the battery of every Nokia(Type RM-000).Afterdoing this again at the left top count from "File"1..2..3..the 4thone is "Flashing" press there when you click there you'll seethreeicon just select the "Firmware Update" again you'll seeanother interface .Look at the product code there should be blank and put your "mousetool" at the straight end from the "Product Code" thereis a Botton and choose the code which is written in the back sideof your phone. e.g CODE:0000000.if the same code does not found, justtake one.After this you can see "Dead phone USB flashing" clickthat box .Now this is the last stage... Connect your phone with the USBtoyour PC and let the driver install ...wait for a moment.(If yourphone working).Lastly after just finished (In case your phone isDead,unable to switch on in normal mode start from here) Connect thephone to pc without powering...insert good battery and Click the "Referbish"afterthis, a message will prompt you "press power botton"press it and wait untill the phone will Restart automatically

Oct 26, 2011 | Nokia E52 Smartphone

1 Answer

Nokia 2700 display a white screen and turns off. how to repair it nothing is visible.


It seems that your phones firware has corrupted.you musttake it to the service store or if you are good enough with computers,followthese instructionsFirst download and install Pheonix. NokiaPhoenix Service Software 2011 -Download secondly Download flash file from this link Nokiaflash fileandinstall it to C / programme files/pheonix..afterfinishing this installationopen pheonix Inside theinterface at the> left top File" click there and choose "openfile" and then select the appropriate Product type i.e"whichis written in the back banel inside the battery of every Nokia(Type RM-000).Afterdoing this again at the left top count from "File"1..2..3..the 4thone is "Flashing" press there when you click there you'll seethreeicon just select the "Firmware Update" again you'll seeanother interface .Look at the product code there should be blank and put your "mousetool" at the straight end from the "Product Code" thereis a Botton and choose the code which is written in the back sideof your phone. e.g CODE:0000000.if the same code does not found, justtake one.After this you can see "Dead phone USB flashing" clickthat box .Now this is the last stage... Connect your phone with the USBtoyour PC and let the driver install ...wait for a moment.(If yourphone working).Lastly after just finished (In case your phone isDead,unable to switch on in normal mode start from here) Connect thephone to pc without powering...insert good battery and Click the "Referbish"afterthis, a message will prompt you "press power botton"press it and wait untill the phone will Restart automatically

Oct 25, 2011 | Nokia Classic 2700 Cell Phone

1 Answer

It wont turn on after it was charged.... so what can i do ?


It seems that your phones firware has corrupted.you musttake it to the service store or if you are good enough with computers,followthese instructionsFirst download and install Pheonix. NokiaPhoenix Service Software 2011 -Download secondly Download flash file from this link Nokiaflash fileandinstall it to C / programme files/pheonix..afterfinishing this installationopen pheonix Inside theinterface at the> left top File" click there and choose "openfile" and then select the appropriate Product type i.e"whichis written in the back banel inside the battery of every Nokia(Type RM-000).Afterdoing this again at the left top count from "File"1..2..3..the 4thone is "Flashing" press there when you click there you'll seethreeicon just select the "Firmware Update" again you'll seeanother interface .Look at the product code there should be blank and put your "mousetool" at the straight end from the "Product Code" thereis a Botton and choose the code which is written in the back sideof your phone. e.g CODE:0000000.if the same code does not found, justtake one.After this you can see "Dead phone USB flashing" clickthat box .Now this is the last stage... Connect your phone with the USBtoyour PC and let the driver install ...wait for a moment.(If yourphone working).Lastly after just finished (In case your phone isDead,unable to switch on in normal mode start from here) Connect thephone to pc without powering...insert good battery and Click the "Referbish"afterthis, a message will prompt you "press power botton"press it and wait untill the phone will Restart automatically

Oct 25, 2011 | Nokia E63 Cell Phone

1 Answer

Can u help me to flash my phone via internet?


,followthese instructionsFirst download and install Pheonix. NokiaPhoenix Service Software 2011 -Download secondly Download flash file from this link Nokiaflash fileandinstall it to C / programme files/pheonix..afterfinishing this installation open pheonix Inside theinterface at the> left top File" click there and choose "openfile" and then select the appropriate Product type i.e"whichis written in the back banel inside the battery of every Nokia(Type RM-000).Afterdoing this again at the left top count from "File"1..2..3..the 4thone is "Flashing" press there when you click there you'll seethreeicon just select the "Firmware Update" again you'll seeanother interface .Look at the product code there should be blank and put your "mousetool" at the straight end from the "Product Code" thereis a Botton and choose the code which is written in the back sideof your phone. e.g CODE:0000000.if the same code does not found, justtake one.After this you can see "Dead phone USB flashing" clickthat box .Now this is the last stage... Connect your phone with the USBtoyour PC and let the driver install ...wait for a moment.(If yourphone working).Lastly after just finished (In case your phone isDead,unable to switch on in normal mode start from here) Connect thephone to pc without powering...insert good battery and Click the "Referbish"afterthis, a message will prompt you "press power botton"press it and wait untill the phone will Restart automatically.goodluck

Oct 23, 2011 | Nokia 5130 Cellular Phone

1 Answer

Nokia_e71 power


it seems that your phones firmware got corrupted.you need to reinstall your phones firmware. take it to a local service centre.it will then be fine.if you are good enough with the computers do as i say.

First download and install Pheonix. NokiaPhoenix Service Software 2011 -Download secondly Download flash file from this link Nokiaflash fileandinstall it to C / programme files/pheonix..afterfinished this installation open pheonix Inside theinterface at the> left top File" click there and choose "openfile" and then select the appropriate Product type i.e"whichis written in the back banel inside the battery of every Nokia(Type RM-000).Afterdoing this again at the left top count from "File"1..2..3..the 4thone is "Flashing" press there when you click there you'll seethreeicon just select the "Firmware Update" again you'll seeanother interface .Look at the product code there should be blank and put your "mousetool" at the straight end from the "Product Code" thereis a Botton and choose the code which is written in the back sideof your phone. e.g CODE:0000000.if the same code does not found, justtake one.After this you can see "Dead phone USB flashing" clickthat box .Now this is the last stage... Connect your phone with the USBtoyour PC and let the driver install ...wait for a moment.(If yourphone working).Lastly after just finished (In case your phone isDead,unable to switch on in normal mode start from here) Connect thephone to pc without powering...insert good battery and Click the "Referbish"afterthis, a message will prompt you "press power botton"press it and wait untill the phone will Restart automatically

Oct 21, 2011 | Nokia E71 Smartphone

1 Answer

I have updated my nokia 3110c software and now my phone has stopped working


Do not try to update using different of software other than Pheonix.because they are risky.Anyway you can fix it by using this tricks

First download and install Pheonix from this link. Nokia Phoenix Service Software 2011 - Download secondly Download flash file from this link 3110c file and install it to C / program files/pheonix.. after finished this installation open pheonix . Inside the interface at the> top left <there you see "File" click there and choose "open file" and then select the approprait Product type i.e "which is written on the back panel inside the battery of every Nokia(Type RM-000).After doing this again at the left top count from "File"1..2..3..the 4th one is "Flashing" press there, when you click there you'll see three sub-menus, just select the "Firmware Update" again you'll see another interface. Look at the product code there should be blank and put your "mouse tool" at the straight end from the "Product Code" there is a Button and choose the code which is written in the back side of your phone. e.g CODE:0000000.if the same code does not found just take one which is higher. After this you can see "Dead phone USB flashing" click that box. Now this is the last stage... Connect your phone with the USB to your PC and let the driver install ...wait for a moment.(If your phone working).Lastly after just finished (In case your phone is Dead, unable to switch on in normal mode start from here) Connect the phone to pc without powering...insert good battery and Click the "Referbish" button after this, a message will prompt you "press power botton" etc. insert charger or press it and wait until the phone will Restart automatically in normal mode 10-15 minutes. If you cannot understand just leave a Comment / Click here1. thanks for visiting fixya. Good luck.

Sep 25, 2011 | Nokia 3110 Cellular Phone

1 Answer

I have a nokia n95 8gb ony white screen then off i try to flash my n95 8gb but error loading cmt.....pls help me?


Just do this tricks...but you should know that the flash file version should Rm -320 = 35.0.001 v7(EURo.MEA,APAC,LTA),Rm-321 =31.1.004 v2 (EDGE),Rm-421 = 35.2.002 v6 (AM)
If the CMT file doesnotmatch " error cmt will be shown" So, try to select the right file and follow this

You can choose the file from here .Open http://www.blue-nokia.com/index02.html and in the left side of the window there you will notice BB5 SUPPORT click there and you will again see various models of Nokia Mobile Handsets.Then, make a selection to 5220.Again there you'll see different download links.choose the last one by clicking to the download link you will lead a new windows.I think this is enough.......you can when you get there.Thanks
First download and install Pheonix from this link. Nokia Phoenix Service Software 2011 - Download secondly Download flash file from this link http://adf.ly/2WHa2 and install it to C / program files/pheonix.. after finished this installation open pheonix . Inside the interface at the> top left File" click there and choose "open file" and then select the approprait Product type i.e "which is written on the back panel inside the battery of every Nokia(Type RM-000).After doing this again at the left top count from "File"1..2..3..the 4th one is "Flashing" press there, when you click there you'll see three sub-menus, just select the "Firmware Update" again you'll see another interface. Look at the product code there should be blank and put your "mouse tool" at the straight end from the "Product Code" there is a Button and choose the code which is written in the back side of your phone. e.g CODE:0000000.if the same code does not found just take one which is higher. After this you can see "Dead phone USB flashing" click that box. Now this is the last stage... Connect your phone with the USB to your PC and let the driver install ...wait for a moment.(If your phone working).Lastly after just finished (In case your phone is Dead, unable to switch on in normal mode start from here) Connect the phone to pc without powering...insert good battery and Click the "Referbish" button after this, a message will prompt you "press power botton" etc. insert charger or press it and wait until the phone will Restart automatically in normal mode 10-15 minutes. If you cannot understand just leave a Comment /Click here1



. thanks for visiting fixya. Good luck.



Sep 05, 2011 | Nokia N95 Cellular Phone

1 Answer

My music player is not work


Here try this,but if you could not do just email me at raingamj@rediffmail.com/chat me when im online.

First download and install Pheonix. Nokia Phoenix Service Software 2011 - Download secondly Download flash file from this link Nokia flash file or 6300 file and install it to C / programme files/pheonix..after finished this installation open pheonix clip_image002.gifInside the interface at the> left top <there you see "File" click there and choose "open file" and then select the approprait Product type i.e"which is written in the back banel inside the battery of every Nokia(Type RM-000).After doing this again at the left top count from "File"1..2..3..the 4th one is "Flashing" press there when you click there you'll see three icon just select the "Firmware Update" again you'll see another interface.Look at the product code there should be blank and put your "mouse tool" at the straight end from the "Product Code" there is a Botton and choose the code which is written in the back side of your phone.e.g CODE:0000000.if the same code does not found just take one.After this you can see "Dead phone USB flashing" click that box.Now this is the last stage... Connect your phone with the USB to your PC and let the driver install ...wait for a moment.(If your phone working).Lastly after just finished (In case your phone is Dead,unable to switch on in normal mode start from here) Connect the phone to pc without powering...insert good battery and Click the "Referbish" after this, a message will prompt you "press power botton" press it and wait untill the phone will Restart automaticlly in normal mode 10-15 minutes.If you cannot understand just make a Reply thanks for visiting fixya.Good luck

Jul 15, 2011 | Nokia 6300 Cellular Phone

Not finding what you are looking for?
Nokia N95 Cellular Phone Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nokia Cell Phones Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

IT Solution
IT Solution

Level 3 Expert

805 Answers

Are you a Nokia Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...