Question about Sony KV-32S42 32" TV

2 Answers

Tv stuck in standby

I have sony nicam tv - unsure of model, as receieved from a friend without remote or manual. recently bought dvd recorder and was attempting to set up the recorder remote to control the tv. followed instructions and held down power button whilse pressing the code number 8. however, then accidentally pressed 9. the tv went into standby mode, and i cant get it to turn back on. have tried different code combinations on remote and unplugging the tv, but still nothing. how can i get the tv out of standby mode? im not bothered wheter the dvd recorder remote works with the tv or not, but at the moment, the tv is useless.

Posted by on

  • Anonymous Mar 18, 2014

    How do I record and play back a show I've recorded.

×

Ad

2 Answers

I believe these Sony TV's have a built in obsolesence and Sony does not care about fixing them. I don't think a 7-year old TV is an "old model". Who can afford to by an expensive TV every 7 years. Shame on Sony.

Posted on May 01, 2007

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

If you can not turn on TV set with the power button on the TV its not a standby problem as this would by pass the standby. Theres most likly, on a set of this age, top have a poiwer regulator problem and is going to need a trained tech to assist you in this repair.

Posted on Sep 11, 2006

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi i bought a second hand RDR HX 750 DVD recorder without a remote. Do i need a remote to see if it is working, and it don't want play when putting in a DVD.


Some TV remotes are able to be programmed to run other equipment that connect to TV. You will need to check what codes are required for the TV remote if you want to try it. ( My samsung remote is programmed to turn on and play my sony dvd player.)

Jul 03, 2017 | Televison & Video

1 Answer

With a rca drc8000 dvd recorder how to finalize recorded dvd without remote


You can stop the recorder by pressing power button to standby mode. Don't unplug the power from the electric source.

Dec 20, 2014 | RCA Televison & Video

1 Answer

I have an RCA VCR model VR651HF that still works great. I can record shows without a problem as long as I'm not trying to watch a dvd. I recently bought a Sony dvd player model DVP SR200. I have my cable...


The sequence should go from the wall to the VCR then the VCR to the RF modulator then from the RF modulator to the TV and this should allow you to record a TV program and watch a DVD at the same time.

Feb 25, 2011 | RCA VR651HF VHS VCR

4 Answers

TV/DVD unit locked in Standby mode


Did you check the casing for a reset button (sometime it an itty ***** hole)
Hope this helps
Trap

Jan 25, 2009 | Bush DVD142RC 14 in. TV/DVD Combo

1 Answer

Need help on using a sony RMT-833 remote control unit


The Sony RMT-833 remote is for a Sony Camcorder - see http://www.replacementremotes.com/store/images/RMT833.jpg

I think you mean the RM 833 remote - if so try eBay as listings there suggest it works with Number: RM-833 Compatible with TV Models: KVX250, KVX2501D
Hope this helps

Sep 25, 2008 | Sony RMT-833 Remote Control

3 Answers

Changing remote command mode for sony rdr-hx525 without remote control


Hold the "Enter" button along with the numeric button for the command mode you selected in Setup. This will reset the remote to work in the command mode you selected (also lets you get back into System Menu to try other command modes). If you pick a different command mode, you'll need to do this again to reset the remote to the selected mode. Found this info courtesy our friends on the Internet - no thanks to Sony's manual...

Aug 06, 2008 | Televison & Video

1 Answer

STANDBY


Page 22 in the user manual will explain how to rectify this. You need to set up both the recorder and remote to be DVD3. I posted the link to the manual on the premium question..

Jul 05, 2008 | Sony RDR-VX525 DVD Recorder/VCR

1 Answer

STANDBY


OK..I see the problem now.. Basically, you have to set both the remote and the recorder to the same command mode. (Default id DVD3). Please see the user manual I have posted in your premium query. It will tell you how to do this on page 22.

Jul 05, 2008 | Sony RDR-VX525 DVD Recorder/VCR

Not finding what you are looking for?

Open Questions:

See all Sony KV-32S42 32" TV Questions

Sony KV-32S42 32" TV Logo

602 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75756 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...