- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
On the right side of the printer's cover is a small plastic "v" shape piece, That piece activates a swith that tells when the cover is open. With time that piece wears-out, so the solution is to replaced the cover or wrap that piece with scotch tape (one single turn will be enough).
HP DeskJet 5150 Printers at times take forever to complete their installation. Be very critical to see if there isn't any task required of you during the hardware detection process, coz this cold hide behind active windows, otherwise
Be patient until it finishes installation, even if process takes 50 minutes, just wait.
You need to remove the piece of tape from them than place them in the holder and push down the lid it will than snap in place,it seams as you will break them if you push it but it wont unless you really put to much pressure.
this is the common problem of 5150 printer .you just open the top cover ,in your right hand you can see a black moving part it may not working properly. try to move back and forth many time ,then close and check your printer.
see dhanraj your problem just simple what u do is just remove the usb sable from the printer and switch on the printer and when the printer head move open the top cover and just quickly switch off the printer from main power supply .
the head will be in the middle now gently remove the catridge.
let me know are you able to fix this