Question about PDAs

1 Answer

My mio p350 was playing up. it then hard reset it self. it came back on line and was working for a few minutes then stalled. i soft reset it and now it will not come back. it stays on the first page (mio logo etc) and wont finish a reset no matter what i do.

Posted by on

  • yedidim18 Nov 21, 2008

    my mio p350 just stays on first page. its frozen. reset doesn't help

  • passedopenic May 22, 2009

    My P-350 also doesnt move from the first mio logo scree.
    Anyone has a fix for this?

    Did anyone contacted support or sent it to repair. Cost?


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mio P350/550 Hard Reset 1. Turn off the pocket pc (on/off button ).
2. Push the joystick button up (to the screen).
3. Turn on the pocket pc.
4. keep holding on the joystick button for 30 second.

Posted on May 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Palm Treo 700W Smartphone is stuck on speaker phone


Hello,

Soft Reset
A Soft Reset stops all active (or open) programs and "reboots" the handheld. When the Treo powers back up, you'll start with all programs closed and the unit will be ready to use. The soft reset is intended to reset the Treo if it is malfunctioning or has become bogged down.
The Palm Treo 750 can be soft reset by quickly pressing and releasing the tiny red button beneath the miniSD memory card door:
diagram.jpg Hard Reset
A Hard Reset wipes the internal memory and returns the Treo to its factory specs, in effect returning the Treo 750 to the state it was in when you purchased it. All data entered, preferences set or software installed on the Treo after purchase will be lost after a hard reset and will have to transferred or reinstalled via ActiveSync / Windows Mobile Device Center.
power_button.jpg The Palm Treo 750 can be hard reset by pressing and holding the power button (seen left) while at the same time pressing and holding reset button beneath the miniSD memory card door. Press and hold the two buttons until the screen completely fades. When the screen returns, you'll be given the option to "Erase all data." Select Yes to complete the hard reset. The Treo will now be as it was when it left the factory and you can start fresh. You may have to perform a soft reset after the hard reset to get the unit to power on.

May 11, 2008 | Palm Treo 700w Smartphone

1 Answer

Hi,I want driver for Mio P350,I have windows 8.1


Automatically get recommended drivers and updates for your hardware
http://windows.microsoft.com/en-us/windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

Dec 19, 2014 | Mio P350 Pocket PC

1 Answer

Hi my htc touch diamond restarts randomly few times a day. can anyone help


try updating your software to 1.93 rom, i was having the same issues when i was on 1.37 and my partner was on 1.35 updated and not had the issue since!

update site - http://www.htc.com/www/supportdownload.aspx?p_id=133&cat=2&dl_id=2

also if that doesnt work try doing a soft and/or hard reset -

Performing a soft reset

Perform a soft (normal) reset to clear all active program memory and shut down all active programs. This is useful when your device is running slower than normal, or a program is not performing properly. If a soft reset is performed when programs are running, unsaved work is lost.

To perform a soft reset

htc_touch_diamond_2_hard_reset_soft_reset.jpg

1. Pull out the stylus, then remove the back cover.
2. Use the stylus tip to press the RESET button (red) located at the opening of the stylus bay. Your device restarts and displays the Home screen.

HTC Touch Diamond 2 hard reset
Performing a hard reset

If a normal reset does not solve a system problem, you can perform a hard (full) reset. After a hard reset, the device is restored to its default settings-the way it was when you first purchased it and turned it on. You will lose any programs you installed, data you entered, and settings you customized on your device, and only Windows Mobile® software and other pre-installed programs will remain.

Warning! Your device will be set back to factory default settings. Make sure that any additional installed programs and/or user data have been backed up before you perform a hard reset.
Important If Encrypt files when placed on a storage card is enabled, backup all files from the storage card before using Clear Storage, hard reset, or updating the operating system. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card.

To perform a Diamond 2 hard reset
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:

htc_touch_diamond_2_hard_reset_soft_reset_1.jpg

3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.

Dec 29, 2010 | HTC Touch Diamond Smartphone

1 Answer

Htc herm200 can't charge


Hold down the two soft-keys (the ones below the screen) and while you have them held down you poke the reset button with your stylus. You'll then see a message on the screen saying 'press R to reset, X to exit'. Pressing the R key on the keyboard will hard-reset the device. It'll now take a few minutes to reboot and load all of the operator customisation etc.

This procedure will hard reset the HTC TyTN, Vodofone v1605 and all other HTC Hermes variants.

Dec 17, 2009 | HTC TYTN GSM Phone

5 Answers

Tmobile wing frozen


Turn off your mobile and then pull out the storage card, Restart your device, it should work now !!!

Jan 10, 2009 | T-Mobile Wing™ Smartphone

1 Answer

Hang when the mobile start


You will need to hard reset your cell It happened with me a few days back here's the procedure;

Hard reset: Press and hold the Left SOFT KEY and Right SOFT KEY, and at the same time, use the stylus to press the RESET button (The round thing between cabel jack and infrared) at the bottom of your device. You will be presented with a menu saying 'press R to reset, X to exit', if you press R Your device will be set back to factory default settings.
(The L/R soft keys are the "- -" keys just above the start and OK buttons)

Apr 19, 2008 | Orange SPV M3100 Smartphone

1 Answer

Unlock my pc


I suppose you have tried a soft reset using the button in the small hole on the LH side & a hard reset using the rear on/off slide switch?

Mar 18, 2008 | Mitac Mio 168 Pocket PC

2 Answers

HP rx3115 hard reset


Had the same problem with my hp rx3115 . Worked fine, then the next day dead. power button, lower buttons, or outter reset button didn't work to turn it on. Okay so, i thought it just needed to recharge. Used computer cable for active synchronizing that also recharges, still dead. Then cable just for recharging. Finally comes on. Charged it all the way up, synchronized it, unplugged it, few minutes......dead. The battery is no good.

Nov 16, 2007 | HP iPAQ RX3115 Pocket PC

1 Answer

Freezing on start up


I have had a aproblem with my digiwalker Mio, which also was freezing up. The only way to sort it is a HARD RESET. The problem in my case appears to be due to the start up program initiating GPS/Tom Tom at the same time. good luck

Aug 28, 2007 | Mitac Mio 168 Pocket PC

Not finding what you are looking for?
PDAs Logo

Related Topics:

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top PDAs Experts

k24674

Level 3 Expert

7987 Answers

kakima

Level 3 Expert

96576 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...