Picture grows larger then snaps back to the correct size and grows again.

On some remotes there is a button with Aspect/Zoom, try pressing that until you get the desired picture.

Could be a dry joint on the Inverter for the tv which is causing the Relay to Click off due to surge in the power or blown capacitors.

Don't watches tv anymore or u will kill the tv CRTS tubes,will cost u more money to replaced the CRTS tv tubes than the problems u have right know.U have convergence problems,it dead.U have any soldering skill?Have solder iron,Solders,Solders wicks,Tries websites Tv repair world.com,Tv repairkits.com to buy a convergence kit to repair it ur self.The shop will cost U $300-$400 for parts and labors.

You have to scan the pictures with a higher resolution to be able to print them in a larger format with acceptable quality.

If your default scanning setting is, say, 150dpi resolution, and you want the picture to be enlarged twofold, then you have to increase the resolution to 300dpi. If you have 300dpi now, increase it to 600dpi.
Some scanner utilities do a fully automatic scan - then you have to find the automatic scan settings and change the default resolution. Or better yet, find an option for a non-automatic scan, where you are presented with various options after the preview scan has been done. There you can usually set the desired size, resolution, improve contrast, sharpness etc.

Generally, the higher the scanning resolution, the more detail you have on the picture, and the higher magnification you can obtain when printing without quality loss.

But there's a catch - a picture in higher resolution produces a bigger file on disk - the file size grows faster then the resolution - a two times bigger picture will be four times bigger on disk. So you have to make sensible choice.

Either 3 boards may cause this issue and need servicing before it grows into a larger more expensive problem.....

Inverter boards
power supply
Time control board

Its a sustain problem and a really easy repair shouldn't cost too much.........

Your light engine is going bad.

i suspect that you have a problem in the yb board that's the first thing that i would do.


good luck

caypianan@yahoo.com

Hello,
Please call me 323-767-6030 and I will go through with you.

hi there, you have vertical section prob., repalce imeditely the electrolytic capacitor at the vertical section. do some test and check up. ty

For any of you experiencing blue dots, lines, growing blobs see the following link:

http://esupport.sony.com/US/perl/news-item.pl?news_id=206