No beep,No Display on my monitor,only CPU heatsink fan is moving

all u u r madarchoods

Try reseating your cpu or make sure that your cpu is working :-/

I just recently fixed a problem like you r having by getting a higher whattage power supply. I plugged the new power supply in and bam! it works like a charm.

Sheephead you should post a new question rather than piggy-back on this one. Also if I understand you correctly you?re saying your PC works with the old graphic card. Please post that info in your new posting.

Mantu, while it could be a bad video card if you?re getting no POST beeping or video display I would be more inclined to suspect a power supply related issue or a short. Did you recently do something that lead to this problem?

i suggest you buy another computer. your computer is rotten

Well, I too had the same silent unit problem. The only thing that worked was the system fan, the hard drive and the DVD. I tried a different (working) CPU, and the original CPU worked fine on another MOBO. Tried a different (working) power supply, memory, graphics card, still nothing. I just cautiously popped out what seemed the be the BIOS chip (it read K7S41GX....), cleaned the pins 0n the chip and on the MOBO and carefully replaced the chip. The system booted fine after that.

Hi its me Tingsnet, i have the same problem too..I turn on my computer and ders no display in the monitor..I tried to clean da memory and videocard, nothings happen.. Wen i detached the memory and videocard in the mobo, and turn on again, ders nothing beeps or sound coming to the motherboad..what can i do to fix it?

im using AMD ATHLON (TM) 64 PROCESSOR 3200+
MOTHERBOARD IS ECS

Check the display settings on ur monitor. is there is effect. if not then remove recent installed hardware. if not works then remove RAM card in re-insert it.

how to fixed your motherboard no display and no beep, 1st you must clean your memory using eraser and brush for painting if not display again try to clean your video card if have a video card using again the eraser and painting brush if not display again try to pull out the bass in the cdrom and floppy disk. if not display you must replace the memory and video card., if not display try to change your motherboard. The beep put speaker in the motherboard.. gudluck guys

Hello,
I am rajesh. I have MSI 915GM mother board. Processor fan was moving but no beeps and no display. pl tell me sutaible reply for solving my problem.

I m using intel d865dvhz motherboard...i experieced no display and anoany beepy sound on cpu...how can i solve this

It could be one of two things, in my opinion. Either you have a bad graphics card (in which case the BIOS should be giving you a beep error code), so you should try to test your graphics card in another machine. The other thing it could be is that the cooling fan isn't properly seated on the cpu or you have too much thermal compound that is sitting on the bridges of the cpu (the thermal compound should ONLY cover the CPU core).

I have the same problem and same motherboard as i u... i have 3 pcs all having problems in post... one i revive just by clearing the cmos but the other two stil a blink... only the cpu fan is running, i dont even get beeps on removing the memory and turning on the motherboard without the memory... i tried to get a working powersupply, graphic card and memory stil its a blink. i tried also removing the processor thinking it may be the causing the trouble but it works with other pc... so i conclude it is the board that causing problems... i guess its fried... before trying to buy for a new one, i suggest try to clear cmos and check it yourself by testing it with working parts... but i definitely conclude its motherboard is fried up... hope i have shared something could satisfy u. tc and may the force be with you...

Im having the same problem only though my monitor wont even start up. The system starts no beeps though. Im using Asus M2N SLI Deleux with dual sli xfx 8600Gt Iv been hacking at this pc all day and dont know what is up.

Had the same Problem:
Take every thing out 1 at a time till all you have is the CHIP let in there. It does work..
Found it was my Chip in the end.
If you ONLY have the CHIP in it should still POST.. Take out memory>hardive>DVD Drives,the LOT.
Then gradualy put them back 1 at a time..
Good luck.. IT DOES WORK BELIVE ME..
Crazyseedy. uk.

Hi all! If you have similar problems check up condensers around of the CPU. It can be "pregnant"? Replace condensers on similar if you are friends of a soldering iron.

i dnt know

try replacing the motherboar.... i had 5 simillar problems...

How many memory sticks do you have in it
if you only have one you need it in the 4th slot my done the same thing and i move it got it going

Obviously, it could be a transcient error or what we call the soft error. There could only be two culprits if you encountered this kind of problem. One is, it could be the power supply. If the power supply is faulty the electricity that flows within it (which is AC converted to DC)could have a lower or higher amount of electricity instead of a normal rate.

But if your PSU is working properly ( you could check it by swapping the PSU to another system unit ) then it could be the MOBO. According to standard IBM POST error codes, no beeping sound could be a faulty PSU or MOBO. It is more practical but to replace the MOBO, but still you could use the memory, videocard, HDD and other devices.

first check the fan is rotating, then ram will cleaned,or change the slot after cleaning,
cmos also check, then check the short of mother board,
the mother board is removed from body,and cleaned, thats all...............

hiiiiiiiiiiiiiiiiiiiiiiiiii

the problem is with your bios jumper and the reset when you on your computer long hold on reset button then it will automatically reset your PC to your normal way now your problem will solve just on your computer it will boot normally

please change mother board!

Hello All if there is display prob.. then

1. check you mother board power supply.
2. there is 2 kind of power supply in M.board see both ware connect properly
3. check RAM (Clean It)

I hope now you get the display. Its normal prob..this is only connection problem.

if not solve then assumable again you system (Remove all things then again assumable your system)


Regards :-
R. PANKAJ

I had the same problem with my P5N32-SLI Deluxe....tried everything, even replaced the PSU...replaced the MOBO and she fired right up

DONT TAKE TROUBLE...GET A NEW MOBO..I'm also getting one

yeah solution # 2 is the best ... all you are Madarchodss... and gandu also.. replace the choot slot.. and put lund properly.. and then you hear beep continiously..

Hi everybody, Im Katirongo from Kiribati.My motherboard P4S533.VM. The problem was when I turn on the power there was a Green Light on the motherboard, but when I boot up the computer there was post on screen.20 or 30 second and it automatically shutit down.

Is there any body who can tell me where must be the problem???

set your board to jumper free mode if you have it.check voltage for video card.