Question about RCA T13208 13 in. TV/VCR Combo

3 Answers

RCA T19064 - HOW TO GET TO MENU

Just set up 90 year old father with this TV and cable to 100 channels. Original remote lost, is there a way to access the menu to reset channels without the original remote? Purchased a Sony Universal remote that works fine to 21 channels, then switchs to video mode ... I believe the menu will solve my problem ... thanx ... jock

Posted by on

  • Anonymous Mar 29, 2014

    need to access menu on the tv without a remote

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.
    Corporal:

    An expert that has over 10 points.
    Mayor:

    An expert whose answer got voted for 2 times.
    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

I have the same set i used a rca universal remote rcr311w i think its the oem one i bought two of them at walmart i don,t know if they still carry them 

Posted on Dec 30, 2007

Ad

With a G.E. 3 device remote control (model #24991), $6.99 at Target, I pressed the setup & menu buttons together and got the T.V.'s menu.  I selected option #5 (i.e. channel setup); the T.V. scanned the channels available from my cable feed and my unit was became fully functional.

Posted on Feb 07, 2008

Ad
Larry Dillon
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points
    All-Star:

    An expert that got 10 achievements.
    MVP:

    An expert that got 5 achievements.
    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

Nope, Im sorry but you are going to need the original remote. You can get one at http://www.remotes.com or check with ba friend or famiely member to see if they have one you can borrow. Also check with a local retailer, explain the problem, maybe they will let you borrow one of thier remotes?

remotes.com

1 800 Remotes Factory original replacement remote...

remotes.com

Factory Original Replacement remote...

Posted on Sep 12, 2006

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

6ya.com

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cannot get the TV or the remote to move to channel 3 to access cable, any ideas? The menu screen will not come on.
You are using the tv original tv remote?Yes,push the buttons on the remote that said like VIDEO or INPUT see if u can get in a tv screen like video 1 or 2.Yes,than you can get your pay cable tv go through video outputs 1 or 2.By using a RCA cable Y,R,W plug plug in one end to the tv IN Holes like Y,R,W and the other end of the cable Y,R,W to the cable box OUT holes Y,R,W.If your tv is too old, that don't even have VIDEO INPUT 1 and 2 for basic VCR and DVD players hook up.It 100% time to upgrade your tv because your tv is out dated and extinct as a DO DO bird.

Nov 17, 2012 | RCA G35831AT 35" TV

1 Answer

The tv is connected to Dish Network as TV2. I accidentally changed the channel & now I can't get it back to channel 90 - it only goes to 13 now. How do I fix this?
In the menu screen, you must find antenna connections. For example " TV Air "(over the air channels 2 through 13) or cable TV. You must tell the menu to select cable TV (with the original remote). This will allow you access to channel 90. Thanks for asking and show a few hands of support.

Nov 07, 2010 | Orion STV2763 27" TV

1 Answer

I lost the remote i bought n rca programmed tv only works with volume and channel changing. i have cable and i want to add channels. i need to access the menu
U can't access menu of the tv with the univeral remote.Only with the original remote.Try website like Remotes.com to buy an original remote.

Oct 02, 2010 | Televison & Video

2 Answers

What channel does the TV need to be on to watch a
If your tv has input [rca connections] jacks, look at the original remote and use the input button.In some cases....pressing 00 on the remote will access an input. If you must a converter box...set your tv and the DVD player to channel 3.

Dec 25, 2009 | RCA F27442 27" TV

1 Answer

Need Remote Control For 1992 RCA TV Set
There should be access to the menu system from the panel controls. Either a menu button or pressing a combination of buttons for a certain period of time to access the menu.

Oct 06, 2017 | RCA F27450 27" TV

1 Answer

Need 1992 Remote Control For RCA ColorTrak TV Set
Tries 1-800-Factory remotes originals Website.
U get same as the original remote.

Aug 17, 2009 | RCA F27450 27" TV

1 Answer

I need help programming a TV
If holding down both volume buttons won't let you into the menu you may need the original remote. Call the phone number on the set. They may still have it available.

Jul 17, 2008 | Televison & Video

6 Answers

Can't get TV onto the AUX channel
You can purchase an RCA universal remote that will let you access the A-V inputs. These only cost about $10.00 or so. Stargazer

Sep 09, 2007 | RCA F25254GY 25" TV

9 Answers

Lost remote to 27in rca tv, how can i switch my tv to input/output mode so i can watch movies on my dvd playter? i have a rca univeral remote, but it will not change my tv to input or output.
using the menu button on the t.v. set an alarm for 1 min in the future. have the t.v change to channel 00 or the input channel @ that time. turn off the t.v and wait until the alarm turns the t.v on.

Aug 11, 2007 | RCA 27F534T TV

3 Answers

Cannot get DVD to Play on TV
Try the old RCA/GE channels of 90/91 or 92 to get to the inputs. Or try entering channel 00. Let me know if that works.

Feb 21, 2007 | RCA F32649 32" TV

Not finding what you are looking for?

View Most Popular

T13208 13 in. TV/VCR Combo

  • Televison & Video

Related Question

I cannot get the TV or the remote to move to channel 3 to access cable, any ideas? The menu screen will not come on.

  • RCA G35831AT 35" TV

Open Questions:

0 Answers

access menu without remote How to change recording speed or other programming without using remote control

Jan 29, 2014 | RCA T13208 13 in. TV/VCR Combo

0 Answers

tuning proline tv modelLVD1983WD Tuning proline television LVD1983WD

Nov 10, 2013 | RCA T13208 13 in. TV/VCR Combo

0 Answers

RCA TV/VCR Model# 13v401tv. Unable to play or eject tape from VCR

Dec 13, 2010 | RCA T13208 13 in. TV/VCR Combo

Related Topics

RCA T13208 13 in. TV/VCR Combo Logo

1,013 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

RCA RCU600M Remote Control

RCA 3-Device Universal Remote...

RCA Universal Remote Control

RCA F27450 27" TV

RCA RCR311B Remote Control

Check Out the Latest HD Televisions Report
Check Out the Latest HD Televisions Report

View all Fixya Reports

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

jason

Level 3 Expert

905 Answers

matt martin
matt martin

Level 3 Expert

1230 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...