Question about Apple iPod nano 8 GB Pink (3rd Generation) (MB453ZP/A)

1 Answer

Synch problem When I plug my ipod into my computer, Itunes locks up. When I disconnect from the ipod from the port, Itunes works again but a message pops up that say "The ipod "Brad...ipod's" cannot be synched. The required folder cannot be found." I've tried everything. I've even uninstalled itunes and put back on. My wife's ipod still will synch to my itunes so I know it's a problem with my actual ipod. I have no idea what to do and need help. My ipod works fine otherwise. I just cannot add or delete any music to it now since it does not allow me to synch up anymore.

Posted by on

  • dave
    dave May 11, 2010

    could you tell me more

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,285 Answers

Are you using the same windows account / itunes as your wife? if so her ipod may be primary...if you & wife have different windows accounts....you can bring up itunes set up your very own (you will be able to add/delete all the songs you want) hope this works out for you

Posted on Jul 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unlock


Unlock an iPod Model A1199
Although the second generation iPod Nano (also known as 2G) uses a four-digit pass code that prevents unauthorized access to your iPod by locking the screen, you can also unlock the device by plugging it into your computer's USB 2.0 port.
When the 2G iPod Nano is connected to the computer it is synchronized, and automatically unlocks the screen according to the official Apple site.
In order to successfully unlock the Nano it must be plugged into the primary computer used for synchronizing content.

Click "Start," "All Programs" and "iTunes" on your PC's desktop, or click "iTunes" on the Macintosh's desktop dock.
Plug the iPod Nano's cable into the docking port on the iPod Nano.
Plug the other end into the USB port on the computer to open iTunes.
Click "Controls" at the top of the iTunes' menu, and select "Eject iPod."
The iPod Nano's screen will be unlocked once it is ejected from your computer.

Manual Guide download
http://manuals.info.apple.com/en_US/iPod_nano_2nd_Gen_Features_Guide.pdf
Unlock an iPod Nano Code
With the latest iPod Nano model, you can set a four-digit code and lock all intruders from accessing your iPod.
In order to use the device's functions again, you need to enter the correct code.
However, if you happen to lose or forget the code, you will need to find another way to unlock your iPod Nano.

Plug the iPod USB cable into the bottom of your iPod Nano.
Plug the other end of the USB cable into a free USB port on your Mac or PC computer.
Open the iTunes program by using the Dock on a Mac or the Start menu on a PC.
Select your iPod Nano from the "Devices" list in the main iTunes window.
Click on the "Sync" button to make a connection between your computer and your iPod Nano.
Click on the "Eject" symbol once the syncing process is complete.
Remove your iPod Nano from the USB cable.
The iPod's lock code will now be reset and you will be able to access all features again.
Navigate to the "Screen Lock" option in the iPod menu to lock your iPod's screen again.
Since your iPod's lock code was just reset, you will be prompted to select a new four-digit code.


iPod Support
http://www.apple.com/support/ipod/

Jul 24, 2013 | Apple iPod nano

1 Answer

My IPOD touch is locked and my daughter forgot the passcode. We don't have access to the computer with the original itunes. The IPOD says to connect to itunes. itunes says it cant connect because there...


all you hv to do is go thru the earlier posts with the same problem....anyways here's the solution again...
  1. Verify you have iTunes 7.5 or later. Apple recommends using the latest version of iTunes.
  2. Disconnect the USB cable from the iPhone or iPod touch, but leave the other end of the cable connected to your computer's USB port.
  3. Power off the device (Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone or iPod touch to turn off.
  4. Press and hold the Home button while reconnecting the USB cable to iPhone. When you reconnect the USB to iPhone, the device should then power on.

    Note: If you see the message "Charging... Please Wait" or you see the screen pictured below, let the device charge for at least 10 minutes to ensure the battery has some charge and then start with step 2 again.ht1808_01.jpg
  5. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo.
  6. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message:
    ts1275.png
    ht1808_02.jpgIf you don't see the "Connect to iTunes" screen, then disconnect the USB cable from iPhone and repeat steps 3-6.

Aug 15, 2009 | Audio Players & Recorders

1 Answer

I can't get my songs onto my iPod Nano


The Ipod or the USB cable may be defective.
Try first connecting the Ipod to a different computer to test it, or using a different data cable.

If Ipod works, then do the following.

Unplug computer power cable, and if it is a laptop or a macbook also remove battery for ten minutes. This will get rid of elecrostatic charges on USB connectors.
If that does not work try reinstalling Itunes, this will synch the Ipod again with the computer.

May 01, 2009 | Apple iPod nano

2 Answers

Apple icon always on new ipod touch and session could not start


if that happened, then yes. then you could just buy a new one. but trust me, that's probably a defective ipod.

Apr 03, 2009 | Apple iPod touch

1 Answer

Need driver for ipod nano for windows millenium


Hi,
You will need to download the latest version of iTunes. It is free. When you have done that, load all of your music into iTunes. Then connect your iPod to the computer with the internet connected. You should be able to see your iPod on the left side of iTunes. You can then click the music tab to tell itunes what music to load into your iPod.

Be sure to click the arrow next to your iPod when the syncing is finished to release your iPod from itunes. Also click the green plug icon at the bottom right of your windows screen. If you cannot see the plug, click on the white arrow until you see the green plug. Click on it and you will see your ipod listed as a mass storage device and a message asking if you want to disconnect it. Click disconnect mass storage device and wait until you see a message saying ;safe to disconnect mass storage device. Done. Hope that helps.

Nov 21, 2008 | Apple iPod nano

1 Answer

How to release screen lock


Hello bsureshmkr,

If you have locked your iPod and cannot remember the unlock code you will need to use your iTunes software to unlock the MP3 player. Connect the player to the primary computer you use to add music to the iPod. Then start iTunes and synch the player as normal. When you are done synching and disconnect the iPod from the computer it will be unlocked.

Best Regards,
Ken
"Go Ahead. Use Us."

Jul 10, 2008 | Apple iPod MA446LL/A MP3 Player

2 Answers

Photo's Won't Synch


change the pictures to .bmp

worked for me

Nov 29, 2007 | Apple iPod Photo MP3 Player

1 Answer

Not synching correctly with itunes music folder


I know another way you could try formatting which may fix this problem. Restoreing just restores all the setting to your iPod yes it shoudl format as well but it may not due to an error or something.

To do try it another way follow these steps, first click on "Start" - "My Computer" look for you iPod when it's connect usually called "Removable Disk" once you've found it "Right-click" on it then click on "Format", once format is complete disconnect, then connect it again then run "Update" for your iPod and for iTunes, once you've done that have another attempt.

Good luck. Hope my solution was helpful in some way. Further problems leave a comment and i will get back to you.

Nov 11, 2007 | Apple iPod nano

Not finding what you are looking for?
Apple iPod nano 8 GB Pink (3rd Generation) (MB453ZP/A) Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apple Audio Players & Recorders Experts

Sean Cole
Sean Cole

Level 2 Expert

250 Answers

kakima

Level 3 Expert

102366 Answers

TO Lady

Level 3 Expert

638 Answers

Are you an Apple Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...