Question about Raymarine Computers & Internet

4 Answers

How to hookup RL70CRC to boat wired for C70

My Raytheon C70 was wired to depth sounder, GPS ,Radar when it was stolen. I now have all the C70 cables still in place and need to know how to connect them to the RL70CRC. What new cables will I need and what cable adapters are available? All the C70 cables are female. Thanks and I hope you can help me solve this. Herb

Posted by on

  • Norsle Oct 30, 2008

    Need Cable part numbers to connect.

  • Norsle Oct 30, 2008

    Have already contacted them and know that a W144 power cord is required, however still need to find someway to plug the C70 DSM into the HSB onthe RL70CRC.

×

Ad

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

Raymarine C and E series are internaly PCs running Windows XP. Network capability between your two machines is slightly different as yuor newer system is using hsb2 (high gain signal booster).

What you need to use are called Raymarine HSB and HSB2 Interconnection Cables.

You can also buy a hub or a switch with both connectors, this also resolves the problem.

You can also find the parts here: Raymarine Products and Parts List

Or contact Raymarine.


Call them if the part is not listed online.

Thanks.

Posted on Oct 31, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

I think your best bet would be to contact Raymarine customer support directly at:
http://raymarine.custhelp.com/cgi-bin/raymarine.cfg/php/enduser/ask.php

They would be in the best position to help you out with this one :)

Posted on Oct 30, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 155 Answers

Check out the adapters and wires at.

Posted on Oct 30, 2008

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,847 Answers

There are 5 wires running out of the antenna and the 5 wires that you need to connect.

Posted on Oct 30, 2008

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get water depths displayed on my C70


You haven't said if you have a DSM fitted ( sonar unit and tranducer) the C70 is only a multifunction display unit MFDU you then put a card in for navigation, a radar aerial/ scanner or a sonar unit for depth and fish finding .
if you have a sonar unit and it's working then
press Presentation
press Depth Digit and select on / off
press OK or cancel to return to the default display
hope this helps

Aug 28, 2014 | Raymarine C70 Multifunction Navigation...

1 Answer

..no depth reading. Old transducer cable was


Hi, Check for debree on depth sensor under boat. As you said check for fuse(s) Good luck.

Jun 20, 2011 | Garmin 185 Sounder GPS Receiver

1 Answer

I have a gps Map 498-depth sounder not working? Have new transducer from Garmin-it flashes "00"-it is not connected to boat yet (transducer)-need it be or can I put in a bucket of water (need it be in...


If the transducer is out of the water, you will not get a reading and see the flashing depth. You should hear and feel the clicking in the transducer when out of the water and working properly. Are you getting a temp reading when out of the water?

May 16, 2010 | Boating

3 Answers

I got a raytheon sl70 pathfinder gps that wont get a fixed signal the antenna is wired right but there dosent seen to be power comeing out of the cord that leads to the antenna. what should i do ????? i...


If you're using a raystar 125 antenna, you will have to power the red wire + and the shield wire - separately. Sl70's don't provide power over seatalk. Also make sure your green and brown wires are properly connected. If it's a 120 just power the red and sheild(black) and leave off the all except the yellow that's your data. If you still have nothing may probably have a problem in the antenna itself.

Jan 20, 2010 | Raymarine RL70CRC GPS Receiver

1 Answer

When I turn on the unit it will not read the depth only a blue screen and it will not let me switch out of auto mode or run the sounder test?


I know this is an old question but just ran across it. The 1833C/NT is a radar and chart plotter. It requires the external and optional black box sounder to have depth recorder functionality.

Oct 03, 2009 | Furuno 1833C/NT GPS Receiver

1 Answer

Raytheon SL70 i need one as well


we can sell you the correct chip, what area? 847-746-0100 www.technicalmarine.com

Sep 19, 2009 | Raymarine RL70CRC GPS Receiver

1 Answer

Signal on my tom tom


I have a raymarine C80 three in one GPS,Radar,depth sounder....no signal or scanner from radar on sreen it has power.

Mar 02, 2009 | Tomtom One XL GPS Receiver

1 Answer

Rl70c raymarine depth finder problem


fish finder transducer needs to be on before you boot your system. check your hsb cables and termination

Jul 12, 2008 | Raymarine RL70CRC GPS Receiver

1 Answer

NO DEPTH READING


Check the finder on the bottom of the boat and make sure the cable is ok?

Aug 09, 2007 | Garmin 185 Sounder GPS Receiver

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Raymarine Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Raymarine Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...