Question about Onkyo TX-SR605 Receiver

2 Answers

Onkyo tuner we have an Onkyo tuner and I'm not sure what model. It is black and has the options for TV, DVD, ect. I would like to know how to preset FM stations on the Onkyo and also how to delete the ones not needed. I did not get a manual on the tuner. It is 1 year old.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

The manual is pretty easily accessible on Onkyo's website. http://www.ch.onkyo.com/files.download/tx-sr605_manual_e.pdf

Setting a preset is as easy as pressing "Memory", using the arrows to select a number, and pressing "Memory" again.

To DELETE a preset, press and hold "Memory" then press "Tuning Mode".



Posted on Nov 08, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

The model is at the back panel it usually starts with a TX or a T. go to onkyousa.com or call 1-800-229-1887 were here to help.

Posted on Mar 04, 2009

4 Suggested Answers

  • 1 Answer

SOURCE: onkyo tx 902

I have a TX-902 owners manual.
It states:

Classified Memory Function. The memory can be divided for different users or programs of stations.
How to classify stations. With this model, six classes (Class A to F) are available and stations can be memorized in any class. A total of 30 stations can be memorized in any class. A total of 30 stations can be memorized.

1. Tune in the desired station.
2. Press the MEMORY button. The MEMORY indicator will flash for 8 seconds.
3. Press the desired Classified Memory button (one of buttons A to F). The station is memorized in the selected class with the memory number which is the smallest of the unoccupied numbers in the class.

By repeating the operations above, up to 30 stations can be memorized. Any more will produce "FULL" notice.

How to cancel memorized stations:
Retrieve the class number you want to cancel and then press the MUTE/MODE button while holding down the MEMORY button. Another station can be memorized with the memory number which has been cancelled.

Hope this helps.

Posted on Jan 08, 2008

ginko
  • 19396 Answers

SOURCE: No surround sound from my PS3 through the Onkyo 5100. Video OK

Go to settings on PS3 and sound settings and set them to HDMI.

If the above did not work, try a auto reset, with unit connected. Hold the PS3 power button down and wait until you hear 2 beeps. The PS3 will automatically search your input/output channels.

Posted on Jan 28, 2009

  • 1 Answer

SOURCE: Onkyo T-4500 FM reception problem

I have the same tuner...yes the fm and am frequencies are different there than north america...check to see if you have the "worldwide" model...there is a small switch under a small hole underneath the tuner to select the region for where it is to be used. If its not the worldwide model then i think your outta luck.

Posted on Jun 01, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can I connect a tv antenna to an onkyo HT R-550 receiver? I see only fm and am. Thanks.


Hi Mark, You can't connect a TV antenna to our receivers they do not have TV tuners. Thank you, Onkyo USA

Oct 21, 2016 | Onkyo Audio Players & Recorders

1 Answer

Will only play DVDs in Black and White


Onkyo DV-CP706B 6-Disc DVD Player (Black) - Amazon.com

www.amazon.com/Onkyo...Player-Black/.../B001AMS...

Amazon.com, Inc.Color: BlackChange .... It's quieter than it was before, and it plays ALL DVDs, even if you can see some visible damage ..... THere was no color-just black & white.

Onkyo dvd player no color only black white Questions ...

www.fixya.com > Forum > Tags > dvd player no color only black white
Onkyo dvd player no color only black white related problems. Ask your Onkyo dvd player no color only black white questions. Get free help, advice & support ...

Onkyo dvd player plays black white Questions & Answer


Dec 29, 2015 | Onkyo Dr-s2.2 5.1 Dvd Home Theater...

1 Answer

I have a TX-8211 but I am out of town looking at Internet Radio tuners. Can you tell me what type of inputs are on the Onkyo? I know it has the black/red spring loaded wire inputs but are there other...


Your tuner will be the limiting factor regarding sound. The Onkyo accepts any stereo analog input via RCA connectors, period.

Those "black/red spring loaded wire inputs" are speaker outputs and if you hook one of those to an innocent audio device's Line In connections you might kiss it all goodbye.

Read the manual...

http://www.retrevo.com/support/Onkyo-TX-8211-Receivers-manual/id/365ci165/t/2/

Feb 01, 2011 | Onkyo TX-8211 Receiver

1 Answer

No image/sound when sony ps3 is connected to onkyo 875


I've had problems with my Onkyo receiver too.

Firstly i suggest going into the Onkyo setup menu. Make sure that in "source settings" i think that's the menu option) that the input e.g. dvd is set to receive HDMI. then go into the settings for DVD and ensure that resolution is set to auto, then go into the monitor out settings (option 1 on main seyup menu) and make sure that main monitor out is set to HDMI and auto resolution.

hope this helps,

Aug 13, 2009 | Onkyo TX-SR875 Receiver

1 Answer

Using remote to play video DVD


You need to bypass your A/V tuner for your video connections (if possible). Plug your video directly into the TV and audio into the tuner. This will also give you a cleaner signal/picture as it does not have to processed by your tuner BEFORE it goes to your tv. Think of it as cutting out the middle man. Your tuner is best left for powering your speaker and not controlling your video despite all of the available connections in the back of it.

I would also get rid of your VHS and cassette players as they are dead technology. Clean up your system and remove the clutter. This will lessen your chance of getting interference. Good luck!!

Oct 01, 2008 | Toshiba 32D46 32" TV

1 Answer

Xbox 360


There are a couple of options you can use.

Are your DVD and cable actually going to the Onkyo first and then to the TV? I am assuming it is, if you listen to the Onkyo when watching a DVD or cable.

The Onkyo receiver you have has 2 hdmi inputs and 1 hdmi output.

Does your Xbox360 have an hdmi output and that is what you want to connect to the Onkyo? Some do and some don't.

If your Xbox has a hdmi output and you are already using the 2 hdmi inputs on the Onkyo, you can not connect the Xbox using the hdmi, you have no more hdmi to connect to, so you must go thru one of the other inputs of the Onkyo.

The hdmi has the video and audio together, the other video options do not. you would need to run seperate audio cables as well.
Your Xbox should have a composite video (yellow RCA jack) output or a component video (1 red, 1 blue, 1 green RCA jack) output.

When you connect the Xbox thru, lets say the composite video of the Onkyo , you will also need to connect the audio from the Xbox to the Onkyo on the same input. It should be right next to the yellow RCA jack or right under it. They are 2 RCA jacks, one red and one white.

You will then need to connect the composite output of the Onkyo to the composite input of the TV.

When connecting like this, you will also need to select the composite input on your TV with your remote for your TV. Your TV should have an input button that lets you go thru all the different inputs to it.

you can also use the component video from the Xbox if it has that. But you must also run the audio to the Onkyo as well to the corresponding audio inputs of the component video input on the Onkyo.

This may sound a little confusing, but remember that the hdmi has the audio and video in one cable, the other video options do not, so you must run additional cables for the audio to the Onkyo from the Xbox.

Also remember whichever video you use from the Xbox to the Onkyo, you must also run that same video from the Onkyo to the TV and then switch the TV over to that input when you want to watch the Xbox on the TV




Jun 21, 2008 | Onkyo TX-SR605 Receiver

2 Answers

No HDMI Output


My configuration:
ZONE 1 (living room)
DishNetwork Dual Tuner DVR Tuner 1 [S-Video out] -> [S-Video in] ONKYO TX-SR875 [HDMI out] -> [HDMI in] Sony KDS-60A3000 rear projection TV

ZONE 2 (living room)
DishNetwork Dual Tuner DVR Tuner 2 [Composite Video out] -> [Composite Video in] ONKYO TX-SR875 [Composite Video out] -> [Composite Video in] Samsung AQUOS LCD TV

Problem:
ONKYO receiver stops sending video signal to my ZONE 1 Sony TV through the HDMI connection. ZONE 2 may still receive video. (NOTE: the issue might be related to the upconverter circuitry?)

Symptom:
I couldn't see any video, but I could hear the Tuner 1 audio through my ONKYO. An important clue is that I couldn't see ONKYO's on-screen display menu on my TV when hitting the [Setup] button on my remote. But, I could see my TV's Sony-based menus and display options.

Solution:
1. Put all ZONES in Standby mode using the remote. Hit these buttons on remote: [Receiver], then [Standby]. [Receiver], [ZONE2], then [Standby], [Receiver], [ZONE3], then [Standby]. You should NOT see any lights on the ONKYO except maybe one red led near the power button.
2. Pull the power plug out of the back of the ONKYO, and leave unplugged for 20-30 seconds. Turning off any power center it is connected to isn't enough. You MUST unplug the power from the back of the ONKYO for 20-30 seconds.
3. Reconnect the power cord to the ONKYO.
4. Using the remote, set ZONE1 to a video source known to be working. If you don't see video, try leaving the power cord off for a longer period.

I know it sounds too simple to work, but that's what brought the video back for me the few times the video stopped displaying. Hope it works for you.

Jan 06, 2008 | Onkyo TX-SR875 Receiver

2 Answers

Subtitle Problem: Onkyo TX-sr605


The only remote that will definitely turn the sat subtitles on/off is the sat remote. The other subtitle buttons on the other remotes refer to the DVD subtitles and the subtitles generated by the tuner in the tv. The subtitle option is greyed out on the tv because you are not on the tv tuner.

Sep 03, 2007 | Onkyo TX-SR604 Receiver

1 Answer

Hookups


You can download the manual from the link below: http://63.148.251.135/redirect_service.cfm?type=own_manuals&file=TXSV414PROom.pdf Please update the question & let us know if the information given was useful to you - Good Luck!

Aug 12, 2007 | Onkyo TX-SV414Pro Receiver

Not finding what you are looking for?
Onkyo TX-SR605 Receiver Logo

Related Topics:

324 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio Players & Recorders Experts

Dennis McCollum

Level 2 Expert

137 Answers

 Grubhead
Grubhead

Level 3 Expert

4850 Answers

The Knight
The Knight

Level 3 Expert

72601 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...