Question about RCA P52926 52" Rear Projection Television

2 Answers

Menu button What can I do if my menu button on the front doesn't work anymore? Thanks

Posted by on

  • 1 more comment 
  • ang_pastor Oct 29, 2008

    Thanks, I guess the technician is the only way to go 'coz don't have the remote.

  • ang_pastor Oct 29, 2008

    thank. will try that. currently using a universal remote but only the  power, channel and volume works.

  • ang_pastor Nov 01, 2008

    thanks a lot

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 50 Answers

MOST LIKELY ,,CAN'T GET A ,,NEW,, KEYBOARD--SOME TV SHOPS HAVE A USED ONE ,,PROBABLY CHEAP...YOU CAN ALSO GET A WALMART GENERIC RCA REMOTE OR BETTER YETYOU CAN PURCHASE A RCA REMOTE FROM "DOLLAR GENERAL" STORES FOR 5.00,,,,THEY WILL WORK..HOPE THAT HELPS

Posted on Oct 29, 2008

  • TUNICA Oct 30, 2008

    YOU CAN'T GET THE OLDER REMOTES FROM RCA OR SHALL WE SAY TOMPSON NOW...YOUR BEST BET IS THE GENERIC FOR 5.00 TUNICA

  • TUNICA Oct 30, 2008

    WHAT'S THE MODEL AND CHASSIS #'S ,,,NEED BOTH ,,THEY ARE ON THE BACK OF SET..TUNICA

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

One alternative is to use the remote. The other would be to get it repaired by a Tv technician.

Posted on Oct 29, 2008

  • Swilin Sampson
    Swilin Sampson Oct 29, 2008

    Well, you could try to purchase a remote fromhttp://replacementremotes.com (if they have it)...

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cannot remember my unlock pattern on my samsung GT-s5360


if you did not remember your unlock pattern ,you cannot open your phone anymore so you need to reset your phone like this...

1. Power off phone
2. Press and hold Home Button ( middle ) + Volume Up + power on button
3. Wait for 5 second until Android System Recovery menu appear
4. There are 4 options

reboot system now
apply update from sdcar
wipe data/factory reset
wipe cache partition


5. Move the options to " Wipe data / factory reset " using volume down ( - ) button and menu button to confirm, because the touchscreen doesn't work in reovery mode
6. After the process done, phone will reboot.

Sep 28, 2012 | Samsung Galaxy S GTI9000 Smartphone

1 Answer

My lock button doesn't work anymore. What's wrong?


For this problem contact the mobile service provider.....

Oct 06, 2011 | Samsung Cell Phones

2 Answers

When i try to adjust the monitor controls message comes up OSD locked, how do I unlock it


The OSD can be enabled or disabled by pressing and holding the Menu button on the front panel for 10 seconds. If the OSD is locked, the warning message OSD Lock displays for ten seconds.

* If the OSD is locked, press and hold the Menu button for 10 seconds to unlock the OSD.
* If the OSD is unlocked, press and hold the Menu button for 10 seconds to lock the OSD.

Oct 24, 2010 | Computers & Internet

2 Answers

OSD lock flashing on monitor


Hi,

To remove the OSD lock, kindly use the steps as shown in the attached image:


639e88f.jpg

Hope this solves your problem. Thanks for using FixYa.

Jun 14, 2010 | ViewSonic E70f (White) 17 in.CRT...

1 Answer

Moniters menu comes up without pressing the menu button


You will need to 1. try to unstick the button on the front of the monitor or purchase a new monitor I had a Compaq 17" monitor do that to me and the button was stuck sideways Let me know if I can help out anymore

Mar 13, 2009 | Dell Dimension 4700 PC Desktop

1 Answer

Where is the eye for the remote on the TV????


Hi, remote sensor is located behind the front screen, if the remote doesn`t work as well (you didn`t say so I`m assuming it doesn`t) then you either have bad tact switches on the control board (the buttons on the front of the set) or the 5 volt line to the control board is missing, video-tek

Feb 03, 2009 | RCA P52937 52" Rear Projection Television

1 Answer

Menu joystick and buttons not working


It needs to be looked at by a technician. If it isn't working when it is plugged in there is something going on with the controls.

Jun 13, 2008 | Canon DC220 DVD Camcorder

12 Answers

Jensen VM9412 Auti-theft lock password lost NEED HELP


Try entering the default Jensen passcode "012345". It may sound silly, but it'll work if the owner hasn't changed the password to their own personal code.

Jan 05, 2008 | Car Audio & Video

Not finding what you are looking for?
RCA P52926 52" Rear Projection Television Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...