Question about Philips 60PP9202 60" Rear Projection HDTV-Ready Television

1 Answer

Philips 55" HD projection TV

I was watching my projection television when the video feed suddenly went off. The set is connected to a cable subscription (Time Warner) but it is not connected to the cable box. This set is in a bedroom. I still had the audio signal. That was not interrupted at all. When I thought the input may have been changed for some reason, I checked all the inputs (VCR, DVD, etc). Still no video signal. However, I do get the audio just fine.

I removed the back to blow the dust out off the boards. I noticed no juice was going to the projection guns. Is this a circuit board issue? Has anyone experienced a problem like this? The model number is 55PW9363/17F, Serial number is YA1B0349027755. The unit is five years old. Philips will only refer me to a repair shop. Any suggestions would be appreciated.

Posted by on

  • jrosscp Nov 17, 2008

    I have a very similar problem my model number is 55PP9701. The audio works fine, but the picture just disappeared after a loud pop. TV turns on but no image...What do I need to do

  • jamietallman Nov 17, 2008

    I have the same problem. My Philips 55" has audio but no video. It happened about 1 month ago. I do not know the exact model #. Wondering if it is worth fixing. I figured one of the lights would go out, but not the entire video.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Philips Master
  • 3,459 Answers

I have been working on solving this problem for a few weeks now myself. I have even purchased 3 broken sets and one good one so that I can do board swaps and test repairs. I have a good idea of what may be causing the problem but the details are too long to put in this thread. Goto the site www.tvrepairkits.com and use the contact us button to send me an email. Include your chasis number or model number. After I receive your message  I will send you an email with some things to check. Hope this helps

Posted on Nov 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 55 inch JVC tv,today the screen went black but still have sound, also the buttons on the back wont work, but the channel down button turns it on and off? What is wrong with it?


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary..

Jan 15, 2017 | JVC Televison & Video

2 Answers

Philips flat screen TV, model 47PFL5432D/37 46" Problem one: Have to turn on and off several times to get it to come on. Problem two: screen darker on one side and screen flutters/flashes.


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Jan 14, 2017 | Philips Televison & Video

1 Answer

Haven't used our TV in six mos. It turned on OK but five minutes later turned off; but five minutes later turned on again but then turns off five minutes later. What to do? New TV or let it warm up?


Check all the connections of the flat cables inside the TV. Contact any service technician. If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/

Jan 14, 2017 | Sharp Televison & Video

1 Answer

One for all universal remote I need the code to program my seiki tv


here you go


Product Support For One for All Remotes.

Q: I'm trying to set up my cable/satellite/universal remote to work with your television. What is the manufacturer's code for my SEIKI TV?
A: Cable and Satellite content providers control the remote codes, and we apologize for any confusion during the remote programming. Please try the following codes:
DIRECTV - 10178 11687, 10178, 10835, 10056, 10150, 10463, 10156, 11498, 11401, 0178,
Time Warner Cable - 0178
Philips - 0002
Comcast - 11864, 10178, 0060
Cox Communications - 0178
Atlas DVR Device URC - 0178
Bell Remotes & Dish Network - 505, 506, 516, 523, 526, 566, 573, 612, 627, 647, 652, 653, 654, 655, 656, 658, 659, 664, 665, 667, 669, 670, 679, 680, 704, 717, 730, 738
ATT U-verse - 1004
Hitachi - 0002
URC- 2964, 0145
Cablevision customer (optimum)- 004
Bose or universal remotes- LG remote code
Universal Remote - One For All OARC04G 4 Device Universal Remote (Element code)
These codes may not work on some universal remotes. If there is another code listed for SEIKI Digital in your universal remote control guide, please try that code. Refer to the Remote Control Guide under your TV's model number for more information.

Jan 09, 2017 | One For All Televison & Video

1 Answer

My tv remote for my 55" philips smart tv stopped working, how can i fix this?


Check the remote control for its infrared emission. Check it with fresh batteries. Check it by pressing all the keys. You can detect the presence of infra-red emission from the remote control, using a cell-phone camera. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. In some cases, the remote control might need to clean.
http://remotesearch.blogspot.com/
Search the site by type in this key phrase "how to test a remote control "in the "search box at the top right of the display window of the Homepage" to get the related post quickly.
https://youtu.be/wUpnETSm6_k
https://www.youtube.com/watch?v=jsSCNCW3IbQ [open and clean]
https://www.youtube.com/watch?v=Qp-l1uh-5gE [open and clean]


Jan 08, 2017 | Philips Televison & Video

1 Answer

To begin with I have Dish network my TV went off and since then in order to have picture and sound i have hookup HDMI cable and also video cable to have picture and sound


You need to set up the dish box for the correct resolution ie 720/1080 etc.
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 05, 2017 | DISH Network Televison & Video

1 Answer

I recently got a 51h83 toshiba tv. When i try to hook up my xbox 360 with the hd component cables in the back i get sound but no video. Please help.


WITH THE TOSHIBA 51H83TOSHIBA TV YOU CANT HOOK UP HD CABLES TO THAT SPECIFIC TV FROM YOUR XBOX 360 BECAUSE THE DEVICE ISNT EQUIPPED WITH THAT CAPABILITY

Nov 16, 2016 | Toshiba 51H83 51" Rear Projection...

2 Answers

Akai PDP4206EA lost tuner and video inputs


Mine died after a brown out. It turned out to be the main board. They're pretty hard to find.

JE

Aug 14, 2009 | Akai PDP4206EA Television

Not finding what you are looking for?
Philips 60PP9202 60" Rear Projection HDTV-Ready Television Logo

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69718 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...