Question about ECHO, Inc. Shred n Vac

1 Answer

Need new bag.

Does bag have velcro easy connect collar? Cost?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Could you please advise me how much it would cost for a replacement bag for a Shred'n' Vac model ES2100.

Monica Hargrove

Posted on Nov 21, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do you attach the bag to the barracuda 2595 blower

The motor housing has a spring loaded, hinged cover over the fan blades (so you don't chop your fingers off when using it as a blower). Open the cover using a screwdriver or narrow tool. Holding the cover open, attach the vacuum tube. Attach the collection bag to the discharge port (same place you attach the blower tubes) and secure in place using the velcro strip sewn onto the bag. Adjust the ******** the bag to fit your shoulder, turn power on and go. To empty the bag, just unzip the bag completely. Make sure you tighten the velcro strip so the bag doesn't come off while you are sucking up leaves.

Oct 11, 2011 | RTO Weed Eater Electric Barracuda 2595...

1 Answer

I need a replacement bag for a Yardman 1400 electric leaf blower.

My zipper went bad so I purchased velcro and sewed it in, works better then the zipper ever did!!!

Aug 05, 2011 | Yard Man Mulchinator QuickShift BlowerVac...

1 Answer

I inherited two different blowers. i can't see how the only bag i have can fit on my weed eater barracuda 2595 and can't find any diagrams on line. once i open the spring door the bag doesn't really fit...

OK this may seem difficult but its really not. The spring door there are only 2 things to do with it open. Either you put in the round circular attachment and then close the door or you attach the bigger of the 2 "funnels."

The big funnel is used to **** up the leaves and it will NOT work WITH that circular attachment attached. The Barracuda will NOT blow leaves without the circular attachment.

If you want to blow leaves, open the swing door, put in the circular piece with a twist to keep it in place, close the door and attach the smaller "funnel" to the smaller opening on the front side of the blower.

If you want to **** up leaves open that swing door, take out the circular piece HOLDING OPEN the swing door and in that same place attach the larger "funnel". Where the smaller funnel goes is where you attach the bag! There should be a small opening in the bag with a velcro strap. Put that over the opening of the blower, attach in place with the velcro and your ready to **** the leaves! When putting on the bag, make sure the bag shoulder strap is facing the top of the blower, not the swing door.

Hope that helps. Now on to find the solution to my problem!


Oct 30, 2010 | RTO Weed Eater Electric Barracuda 2595...

2 Answers

I have a MTD blower vacuum model BV3100 and require a new collection bag

Buy a Homelite Large bag from Bunnings it fits snugly using Velcro strap to fix to vacuam uptake 243d5733-f67f-465c-b8f0-725d16356882.jpg

Aug 20, 2010 | Mtd Products 32 CC, 4-Cycle Backpack...

1 Answer

How do I attach the vacuum bag and get it to work

There should be an air intake grille of some type, the bag should have a round opening that fits over a collar around the air intake, it may be held in place by a Velcro strap.

You don't give much detail to go on.

May 25, 2010 | RTO Weed Eater Electric Barracuda 2595...

1 Answer

Need to know how to attach vac bag

The bag should fasten to the blower where the blowing tube comes out. (blowing tube is removed to install the bag, and a pick up tube is installed on the 'screen door') It should have a tightening strap or velcro to hold it in place.

Nov 09, 2009 | RTO Weed Eater Electric Barracuda 2595...

2 Answers

I need a bag for a Yard Man Ymesv1300 leaf blower

contact southern supply company at 205-833-2525 or email them at and I feel sure Jason or

someone there can help you.

Sep 04, 2009 | Yard Man Leaf Blowers

1 Answer

Zipper problems

if the bag cant be replaced! then i would recomend replacing the zipper with velcro (might have to sew it somehow) but thats what i would do if it were mine-----thanks

Mar 04, 2009 | Craftsman Leaf Blowers

Not finding what you are looking for?
ECHO, Inc. Shred n Vac Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Echo Leaf Blowers Experts

Jim Parker
Jim Parker

Level 3 Expert

1040 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

375 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

286 Answers

Are you an Echo Leaf Blower Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides