Question about Pioneer CDJ-1000MKII CD Player

1 Answer

Problem with cdj1000 mk2


I've read a post on fixya.com about a cdj1000 mk2 powering up with no display.
I have one powering up with only the center display on the jog full on, do you have any idea what this could be ?
The circuit protectors seem to be ok and the psu to, but do you have a shematic with the voltages I should be meassuring ?
The player was fine, but I unpluged it form the power and after connecting again it had this problem.
I hope you can help me.

Greets,

Jeroen

Posted by on

  • Blanco Cncy
    Blanco Cncy Feb 20, 2015

    friend did u manage to repair?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 68 Answers

Possible faulty cable to main display or small crack or d/j on pcb.
if you havent got it repaired then you can send it to us.

thanks.


http://www.audiovisualservices.info/

Posted on Dec 03, 2008

  • Tim Fearn Oct 16, 2013

    i also have this same problem buts its with a mk1 1000

  • Blanco Cncy
    Blanco Cncy Feb 20, 2015

    i also have same problem but i live in cyprus. can u not send me parts and i repair

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Is it possible to do a factory reset on a CDJ1000? (pitch issue)


There is no mention of a factory reset in the Mk1 service manual. The firmware can be upgraded - Mk1 & Mk2's need to go to Pioneer / Videotec, Mk'3 can be upgraded from CD.

http://www.pioneer.co.uk/uk/support/software/CDJ-1000%20MK3/index.html

The pitch may just be faulty, look here for a replacement :-
http://stores.ebay.co.uk/methleykev

Jul 18, 2010 | Pioneer CDJ-1000 CD Player

1 Answer

The center light of my cdj1000 is not working


Mk1 ? Mk2 ? Mk3?

On mk2's zener diode (D1221 - surface mount on JFLB pcb) quite often goes short circuit and blows fuse / circuit protector IC106 - N10 400mA rating
http://www.technicsdjuk.com/

May 10, 2010 | Pioneer CDJ-1000 CD Player

1 Answer

Sound has died on cdj1000


Does absolutely every other function / light / switch etc etc work ok?, If so then the 1st place I'd look would be the output phono connectors and the circuit board they are soldered to, I would be looking for dry joints and cracks where the sockets are mounted

http://www.technicsdjuk.com/

Apr 27, 2010 | Pioneer CDJ-1000MK2 Turntable

1 Answer

The center light of my cdj1000 is not working


Mk1 ? Mk2 ? Mk3?

On mk2's zener diode (D1221 - surface mount on JFLB / center display pcb) quite often goes short circuit and blows fuse / circuit protector IC106 - N10 400mA rating
http://www.technicsdjuk.com/

Mar 16, 2010 | Pioneer CDJ-1000 CD Player

2 Answers

Cdj1000 mk2 no sound, no display , jog display, but powers up


There is a line of these fuses next to the power supply connector on the main board

Jan 31, 2010 | Pioneer CDJ-1000 CD Player

1 Answer

Pioneer CDJ1000 MK2 - Service/Repair In London ?? It Wont Read ?


i had my decks fixed by these guys they are in london.

thier websites is www.technics1210repair.co.uk

they do PIONNER CDJ REPAIRS AND SERVICING

check them out.

im only spreading the word due it i had my decks fixed their and i am so pleased im telling everyone so they can get the same service i did, rather than paying over the odds at some **** toster repair shop.

alan

Dec 14, 2009 | Pioneer CDJ-1000 CD Player

1 Answer

I have a CDJ 1000. Is there a firmware update? How would I do it?


CDJ1000 Mk1 & Mk2's need to be sent to Pioneer or Videotec for firmware updates, Mk3's software can be update from CD. Visit the Pioneer website for the file (to burn to disc) and instructions.

http://www.pioneerdj.eu/uk/content/support/support/upgrade/CDJ1000MK3.html

http://stores.ebay.co.uk/methleykev

Oct 03, 2009 | Pioneer CDJ-1000 CD Player

1 Answer

I have a CDJ1000 MK2 which powers up but the main display nor the jog dial display power on and no sound. The buttons do work though. When I press the forward button I see the cd lens moving. Has anyone...


removed top cover and there is a power supply that you will see on the top left side of the main chassic, check f1 fuse as that may be bad.The complete power supply board part number is DWR1344

Sep 15, 2009 | Pioneer CDJ-1000 CD Player

5 Answers

CDJ1000 MK2 Powers up but no display & no sound


Had the sam problem... Turn te player upside down, take off the bottom cover and check the semiconductor fuses located near the supply connector on the top of mainboard. The one that is responsible for display is marked as VLOD (-40V). Worked for me :)

May 15, 2009 | Pioneer CDJ-1000 CD Player

Not finding what you are looking for?
Pioneer CDJ-1000MKII CD Player Logo

Related Topics:

527 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4946 Answers

John
John

Level 2 Expert

509 Answers

Dennis McCollum

Level 2 Expert

137 Answers

Are you a Pioneer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...