Question about IBM 300PL (PC 300 PL 733) PC Desktop

2 Answers

Problem with my ibm300PL BIOS

My ibm 300PL bios is in cheenese how can i change it into english?
Help please

Posted by on

  • hakim_joki May 07, 2009

    Dear all,
    Kalau saya ada seorang client yang membetulkan komputer ke
    saya terus tidak bisa masuk ke windows cuma sampai di safemode setelah masuk ada kata error atau corupt seperti system32driverPCIsys. terus saya restart lagi tapi yang muncul lain lagi seperti system32driverNtfs sys. Jadi apatuh permasalahannya?
    yang jadi pertanyaan saya:
    apa perlu update Biosnya? atau Bios dari pada motherboard itu sendiri terkena Virus? tolong kasih solusinya yah?
    kalo memang perlu update bios kasih tau nama soft nya?
    Info : IBM 300pl Desktop S/N 689220u System Board CDWJG60108L.
    Thank's sebelumnya.


×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Nvjt58a.exe 1,050,983 Flash BIOS update
nvjt58a.txt 17,012 README for the Flash BIOS update

Posted on Jan 13, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My IBM300PL will not recognize the Canon MP495 through the USB ports? This PC`s USB seems to have uper and lower USB possibilities in each port!! WHAT IS GOING on? IV`e been at it for 16 HOUR`s !!!! rksguit@hotmail.com

Posted on Mar 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can change from french to english language on IBM 8183-m14?


in the bios look for the word "langue" then choose English and the save

May 21, 2015 | IBM PC Desktops

2 Answers

How to change my ibm desktop bios language in english


You`ll need to re-flash your BIOS with the English version..

And then you will get your BIOS in english language
Please rate me if this solution works for you

Thanks......Have a great time.

Aug 07, 2010 | IBM NetVista PC Desktop

1 Answer

When i start my 300pl desk top system. when i


Hello my friend.That error message has nothing to do with the actual keyboard.The POST/BIOS is reading a single port bit in the system boards keyboard controller and detecting this bit as being shorted to ground. On some systems there is a keylock on the front of the case that allows you to "lock" the keyboard for security reasons. It is this lock that is being detected. On a system without a keylock, this error can be caused by one of the front panel wires being placed on the wrong pin on the system board. Or by something shorting out the keylock pin on the system board, or a hardware failure in the keyboard controller, or using the wrong version of BIOS.So make sure if your computer has a lock key/button or something on the case that locks the keyboard.Also you can load default bios settings by hitting Del while you boot if you have change anything in the bios.

Feb 08, 2010 | IBM 300PL (PC 300 PL 733) PC Desktop

1 Answer

Asset antenna not detected


go to the bios setup by pressing F1 or as require by the system and check for security and disable any and save it

Dec 18, 2009 | IBM 300PL (PC 300 PL 733) PC Desktop

1 Answer

I have IBM 300pl. And it has strange fan problem.


A fan that no longer works will cause a heat problem. While it may not cause a complete failure, it can cause some strange things to start happening. Your best best is to shut the PC down and remove the cover. Restart the PC an determine which fan(s) has stopped working.

At this point, you can either 1) contact IBM for a replacement fan or 2) remove the fan yourself and google the name and model number of the fan to find a direct replacement and either order online or 3) visit a local PC repair shop to buy a replacement fan that matches the defective one.

Buying direct from IBM will probably cost the most, but will be the exact type needed for your PC. Buying locally will probably be cheaper and faster, but may not be an exact replacement unless it is the same model, etc.

When calling IBM you'll need the computer model, serial number and any other identifying numbers on it for them to help you out.

Sep 18, 2009 | IBM PC 300PL PC Desktop

2 Answers

How to boot via CD-ROM in IBM PC 300


my IBM flat desktop is not booting from CD ROM, Please help me.

Jun 18, 2009 | IBM 300PL (PC 300 PL 733) PC Desktop

1 Answer

CMOS BATTERY


It really depends on the Driver model.

On the latest models capicitors of BIOS can hold the charge for longer and you can easily change the battery with the new one.

If you have the old board just go ahead and change the battery as usual and dont worry for the settings at all.

You can load the safest default settings by pressings F1,F9,F10

Jun 01, 2008 | IBM PC 300PL PC Desktop

4 Answers

Want change my bios language


Dear Batoot ,

Let me know the Model number of your Gigabyet motherboard. Then i can provide you the Solution.It must Required the model No.

Cheerup

Mar 05, 2008 | IBM NetVista PC Desktop

5 Answers

IBM NetVista boot Prob


You don't have to update your BIOS just to have it changed into English... It's all there, your problem is how to get into that change language area... Check your system manual I am sure you'll find what you need...

Nov 04, 2007 | IBM NetVista PC Desktop

Not finding what you are looking for?
IBM 300PL (PC 300 PL 733) PC Desktop Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top IBM PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2598 Answers

Are you an IBM PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...