Question about Uniden DECT 6.0 Cordless Telephone Expansion Handset

Open Question

Sounds like I am in a tunnel

I have the Uniden DECT 6.0 telephone with 3 handsets. Everything was fine until a couple of months ago. While I can hear fine on my end of the line, it will sound like I am in a tunnel or way far off to the people I am talking to. This will fade in and out as they will hear me fine for a minute or so, then I will sound far off for a minute or so and then I will sound fine again. I am getting so frustrated, please any help or suggestions will be greatly appreciated. Thanks, Pam

Posted by on

5 Suggested Answers

  • 1 Answer

SOURCE: How to turn off telephone ringer on handset for

Just press the down arrow on the center button

Posted on Mar 27, 2009

goalie39
  • 469 Answers

SOURCE: After charging a Uniden 2180-2 DECT 6.0, the base stope showing anything on its display. As for the other handset, their display report " searching" since they can' t connect to the base. What is goin


Reset Procedure for Cordless Phones

Question:
0.gif
What is the general reset procedure for cordless phones?
0.gif
Answer:
0.gif
1. Disconnect Battery from handset(s)
2. Disconnect Phone Cord from wall jack
3. Disconnect Phone cord from base unit
4. Disconnect AC adapter from wall outlet
5. Allow to sit for 30 min
6. Reconnect Phone Cord to base
7. Reconnect Phone cord to wall jack
8. Reconnect AC Adapter to wall outlet
9. Reconnect Battery to hanset until you click or feel the plug snap into place
10. Re-Register Handset by placing on main base in most instances

Posted on May 05, 2009

  • 38 Answers

SOURCE: I have a Uniden DECT 6.0 phone set. I damaged one

On the base, open the menu and select Register Handset. The display should say Handset Registering.
On the handset you want to register, press and hold # until the handset display says Handset Registering (about 2 seconds).
1.
2.
DSL filterTelephone cordTelephone wall jack
45
In about 30 seconds, the handset display should say Registration Complete. Press Talk/fl ash and make sure you get a dial tone.
If...
Try...
you don't hear a dial tone
the display says Registration Failed --
Making sure the handset is fully charged, then start over at step 1.

Posted on Sep 08, 2009

  • 1 Answer

SOURCE: uniden dect6.0 handsets do not operate

I am writing for my Mum, who is 99. We live far apart, so it is a bit difficult to fix her problem. She had a new Uniden DECT 60 (?) installed in early July. It seemed to be working fine when we left her, but she says it only rings twice before going to voice mail. She says it has always been like that. How can we fix this for her even though we live at a distance?.

Posted on Aug 17, 2010

  • 1 Answer

SOURCE: I have a Uniden DECT 1480-5c phone (base 5

Try disconnecting battery for a couple of minutes on each phone that has the problem.

Posted on Jan 31, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Set greeting on uniden dect 6.


Select the model of your Uniden DECT 6.0 system from the list beginning at http://www.uniden.com/scat/dectphones_mnl to download a copy of the manual.

Jan 19, 2014 | Uniden DECT 6.0 Cordless Telephone...

2 Answers

Change the rings from 2 to 6


Since you declined to specify the model of your Uniden DECT 6.0 system I can only suggest you select it from the list beginning here to download a copy of the manual.

Jul 04, 2012 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

Uniden DECT 1580-4WXT waterproof unit appears to be dead - will not charge or register with base unit. Just bought system at Sam's Club 2 days ago. The other 3 units work fine.


This phone uses inductive charging because of the waterproof feature. I suggest that you remove the
battery cover from the back of the handset, unplug
the battery, and then plug it back into the handset.
This solution worked for me.

Jun 21, 2010 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

I am going away for 3 months. Should i leave my Uniden DECT 6.0 phone on the charger - or NOT on the charger?


hi, its not safe to leave it on since you will not be using it, over charging could destroy the battery.
cheers

May 29, 2010 | Uniden DECT 6.0 Cordless Telephone...

3 Answers

Uniden dect6.0 handsets do not operate


I am writing for my Mum, who is 99. We live far apart, so it is a bit difficult to fix her problem. She had a new Uniden DECT 60 (?) installed in early July. It seemed to be working fine when we left her, but she says it only rings twice before going to voice mail. She says it has always been like that. How can we fix this for her even though we live at a distance?.

Mar 12, 2008 | Uniden DECT 6.0 Cordless Telephone...

Not finding what you are looking for?
Uniden DECT 6.0 Cordless Telephone Expansion Handset Logo

Related Topics:

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Phones Experts

kakima

Level 3 Expert

96683 Answers

Dave Ellis

Level 2 Expert

84 Answers

k24674

Level 3 Expert

7987 Answers

Are you an Uniden Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...