Question about System Power Supplies

1 Answer

I need the publiaher of microsoft free please in the name of JES?S

Ihad the program on my PC but after they have to solve some problems with it (my PC ) Now I need to find anywhere free please help

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 59 Answers

You can download a trial version 60 or 90 days at microsoft.com there is no other LEGAL way to get it free!

Posted on Oct 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fix and repair system


Start your PC and press F8 several times until the boot menu comes up. Then select "Safe Mode with Networking". Now get some or ALL of the FREE programs below.

Download, Install and Run Malwarebytes Anti-Malware:
http://majorgeeks.com/download.php?det=5756
When Installing choose the non-pro version.

Download, Unzip, Install and Run TDSSKiller:
http://majorgeeks.com/Kaspersky_TDSSKiller_d6895.html

Download, Install and Run Super Anti-Spyware:
http://majorgeeks.com/SUPERAntiSpyware_d5116.html

If you have an outdated Anti-virus program then Download, Install and Run Avira Anti-Virus:
http://majorgeeks.com/Avira_AntiVir_Personal_-_FREE_Antivirus_d955.html
Make sure to select ALL of the "threat categories" when you install or configure Avira...

Then CCleaner. It's totally FREE and you can clean off a ton of junk files in a single click and optimize the programs that start when windows starts. It's super easy to use. You can get it here:
http://majorgeeks.com/download.php?det=5125

You should be in pretty good shape if you run and install all of these programs.

Sep 04, 2012 | Acer System Power Supplies

1 Answer

Hello - I recentely installed a brand new Zotac GeForce 430 video card on my computer, and since doing so my computer reports no audio device. I know they don't have anything to do with eachother but...


cnetdownload.com on the home page you should see the download software finder under that there will be a list platform, category sub category price from the category drop down list select drivers then from the price drop down list select free or which ever applies to your need hope this helps also you might http://download.cnet.com/drivermax/3000-18513_4-10572602.html
Behind a slick interface, this program backs up all your PC's drivers in case you mess up something fierce. From registration to implementation, DriverMax works fast, runs smooth, and does even more than mere backing up.
When you run the app, it asks you if you'd like to run the trial version or apply for a registration key. The key is free, though, requiring only an e-mail address and your name. Once you've entered the key, the program interface appears, with slick button navigation: Driver Operations, Updates and Identification, and Popular Hardware. Mousing over one reveals more choices, so you can export your drivers, import drivers, or view an installed drivers report.
Updates lets you update both the DriverMax software and the drivers themselves, although as of this writing there is a warning label on the DriverMax Web site that downloads are not currently functioning. The program can also identify unknown hardware and point you in the direction of popular hardware options, pointing users to a compilation of statistics about different video cards and processors.
The strongest features, though, relate to driver backup and reinstalls. They function smoothly, offering users the option to back up all drivers or compile a customized list. Reinstalling an "accidentally" deleted driver was as pain-free as could be. As of the version 4.4 update, the DriverMax Agent, which automatically scans for driver updates, works in Windows XP and Windows Vista 32-bit, but not 64-bit. This is a great utility tool that should appeal to newbies, advanced hackers, and everybody in between. Hope this helps

Mar 22, 2011 | HP ATX-300-12Z (ATX30012ZBD) 300-Watt...

2 Answers

What solve this problen in dll regster file Regsvr32 error 0x80004005


open an elevated command prompt.
To open an elevated Command Prompt, click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator if that doesnt work you need to fix the registry. CAUTION: you can, and most likely WILL screw your system up bad if you do not know EXACTLY what you are doing. you can get access to the registry by clicking start> accessories>command prompt then typing regedit in the box and click the button. PLEASE READ THE CAUTION I GAVE YOU!!
if you are not fully capable of editing your registry downlo0ad a program called error expert or registry editor or something like it. these programs will fix it for you. error expert is one of the very best you can buy it and download it here:
http://errorexpert.com/

there is a free one called restry manager get it here:
http://www.resplendence.com/downloads
this is the best way for you to go. as my caution said itwill most likel;y mess your system up to the point where you will need to reinstal widows if you goof up editing your registry by yourself.

Jun 05, 2010 | System Power Supplies

1 Answer

Emachine T5026 power supply ** FREE SHIPPNG ** (EM12EB324PIN) Power Supply: my cpu fan is running but at a low speed. When i t...


In my opinion you have a faulty power supply, replacing only the fan may not solve your problem. Try replacing the power supply.

May 16, 2010 | E-Machines Emachine T5026 power supply **...

1 Answer

I have an emachine t5026 that won't turn on. It


There can be two problems with your PC. either the power supply is faulty which is highly probable, and the other is that your Motherboard maybe faulty or both things are faulty. Try replacing the Power supply first. It should solve your problem.

May 15, 2010 | E-Machines Emachine T5026 power supply **...

3 Answers

I just got a new pc with Win 7 and there is no email program. How can I get one?


Windows comes with a program called windows live mail, but you have to download it separately. You can install it by installing windows live essentials through windows update on online here: download.live.com

Dec 29, 2009 | Gateway Emachine Bestec ATX-250-12E PS...

1 Answer

I have the same problem with Demension 5150. Replacing the P/S didn't solved the problem. When I connected the P/S the motherboard green LED light lighted up, however, no matter how many times I pressed...


For non-BIOS issues:

If you did not try to update BIOS before the problem started then try these troubleshooting steps.

1. Full power down. Unplug the power cord from the Power supply. Then hold down the pc power button (this discharges any residual power in the capacitors).

2. Open the case and reseat the graphics card, hard drive, and RAM.

3. Take out one of the RAM sticks if there is 2 or more. Swap the RAM sticks in different RAM slots. Try one stick at a time to see if you can get the PC to boot. If this works, then the remaining ram sticks are damaged.

4. Set the Cmos jumper to clear. Power up the pc. Power down the PC. Set the Cmos jumper back to normal position, power up the PC.

5. Unplug and replug all the power supply cables.

6. Check the powersupply function. Either by a powersupply voltage checker (20-25 dollars at local PC shop), get the supply tested at a PC shop (usually a free service), put the powersupply in a different pc, or try a different powersupply in the problem computer.

If the Powersupply checks out ok, then you will have to do a process of elimination to find out what part or parts are the culprit of the No-Boot.

Start by pulling all the ram sticks if you have not already. This is the easiest components to check and usually a culprit.

Take out one of the RAM sticks if there is 2 or more. Swap the RAM sticks in different RAM slots. Try one stick at a time to see if you can get the PC to boot. If this works, then the remaining ram sticks are damaged.

If it is not the RAM, you have to continue removing items such as sound cards, un-plugging hard drives and optical drives, other PCI cards. Do this one at a time until you find the culprit. If a POST screen, meaning you can see Anything from the PC brand name to Motherboard brand name appearing on the screen. The PC may not boot to windows, but it Does post at this point, and with that the problem is resolved. If windows does not load, then you have a new problem. Best dealt with asking a new question.

Good luck!
Brian

Jul 04, 2009 | Dell PWR LED CONTROL SWITCH DELLOPTIPLEXG1...

1 Answer

Dell 4400 won't power up Flea light works


For non-BIOS issues:

If you did not try to update BIOS before the problem started then try these troubleshooting steps.

1. Full power down. Unplug the power cord from the Power supply. Then hold down the pc power button (this discharges any residual power in the capacitors).

2. Open the case and reseat the graphics card, hard drive, and RAM.

3. Take out one of the RAM sticks if there is 2 or more. Swap the RAM sticks in different RAM slots. Try one stick at a time to see if you can get the PC to boot. If this works, then the remaining ram sticks are damaged.

4. Set the Cmos jumper to clear. Power up the pc. Power down the PC. Set the Cmos jumper back to normal position, power up the PC.

5. Unplug and replug all the power supply cables.

6. Check the powersupply function. Either by a powersupply voltage checker (20-25 dollars at local PC shop), get the supply tested at a PC shop (usually a free service), put the powersupply in a different pc, or try a different powersupply in the problem computer.

If the Powersupply checks out ok, then you will have to do a process of elimination to find out what part or parts are the culprit of the No-Boot.

Start by pulling all the ram sticks if you have not already. This is the easiest components to check and usually a culprit.

Take out one of the RAM sticks if there is 2 or more. Swap the RAM sticks in different RAM slots. Try one stick at a time to see if you can get the PC to boot. If this works, then the remaining ram sticks are damaged.

If it is not the RAM, you have to continue removing items such as sound cards, un-plugging hard drives and optical drives, other PCI cards. Do this one at a time until you find the culprit. If a POST screen, meaning you can see Anything from the PC brand name to Motherboard brand name appearing on the screen. The PC may not boot to windows, but it Does post at this point, and with that the problem is resolved. If windows does not load, then you have a new problem. Best dealt with asking a new question.

Good luck!
Brian

Jun 28, 2009 | Dell Dimension 4400 Power Supply ** FREE...

1 Answer

I have a HP M 7160 that will not turn on. There


For non-BIOS issues:

If you did not try to update BIOS before the problem started then try these troubleshooting steps.

1. Full power down. Unplug the power cord from the Power supply. Then hold down the pc power button (this discharges any residual power in the capacitors).

2. Open the case and reseat the graphics card, hard drive, and RAM.

3. Take out one of the RAM sticks if there is 2 or more. Swap the RAM sticks in different RAM slots. Try one stick at a time to see if you can get the PC to boot. If this works, then the remaining ram sticks are damaged.

4. Set the Cmos jumper to clear. Power up the pc. Power down the PC. Set the Cmos jumper back to normal position, power up the PC.

5. Unplug and replug all the power supply cables.

6. Check the powersupply function. Either by a powersupply voltage checker (20-25 dollars at local PC shop), get the supply tested at a PC shop (usually a free service), put the powersupply in a different pc, or try a different powersupply in the problem computer.

If the Powersupply checks out ok, then you will have to do a process of elimination to find out what part or parts are the culprit of the No-Boot.

Start by pulling all the ram sticks if you have not already. This is the easiest components to check and usually a culprit.

Take out one of the RAM sticks if there is 2 or more. Swap the RAM sticks in different RAM slots. Try one stick at a time to see if you can get the PC to boot. If this works, then the remaining ram sticks are damaged.

If it is not the RAM, you have to continue removing items such as sound cards, un-plugging hard drives and optical drives, other PCI cards. Do this one at a time until you find the culprit. If a POST screen, meaning you can see Anything from the PC brand name to Motherboard brand name appearing on the screen. The PC may not boot to windows, but it Does post at this point, and with that the problem is resolved. If windows does not load, then you have a new problem. Best dealt with asking a new question.

Good luck!
Brian

Jun 20, 2009 | Bestec (ATX100-5) (ATX1005B) Power Supply

Not finding what you are looking for?
System Power Supplies Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top System Power Supplies Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a System Power Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...