Question about Microsoft Windows XP Professional for PC

1 Answer

Can't access audio files

When I click on any of the files in a particular directory, I get the message that the system can't access the file - to check to see if another program is using it or that I don't have rights. I've tried this as Administrator wi no success. I did a scandisk and it came up clean. I'm assuming there's some kind of disk corruption. Can somebody suggest a good disk cleanup utility? Most of the utilities I see are for delete file recovery - which isn't the case here...

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 55 Answers

Norton System Works offers a good scandisk utility. Before doing that, try opening something like windows media player or another audio program and try to open an audio file inside that program to see if you get the same error.

Posted on Sep 11, 2006

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

We are integrating with third party software and updated to PC-Charge Pro. Now our third party system is not able to connect with PC-Charge. It seems the files are written to a different directory and are...


you can perform a system restore to get back to your previous settings.
Go to 'Start'--->Programs--->Accessories--->System Tools--->System Restore

Here you will have to check "Restore computer to an earlier time' and click Next
Now you will find one Month Calendar window with Dates below, go to the previous month by clicking the '


The detail of that particular date should show "System Checkpoint" and time on the right hand side box. Select that date.


Now, Click on Next and System Restore will start and windows will take a reboot.

After reboot your problem should be resolved.



If you feel that my answers have helped you getting solution to your problems then please give a vote.
Thanks.

Jul 06, 2011 | Go Software Inc. PCCharge Pro...

Tip

COMMON FTP ERROR CODES


~~~~~~~~~COMMON FTP ERROR CODES~~~~~~~~~~
# Description

110 Restart marker reply. In this case, the text is exact and not left to the particular implementation; it must read: MARK yyyy = mmmm where yyyy is User-process data stream marker, and mmmm server's equivalent marker (note the spaces between markers and "=").

120 Service ready in nnn minutes.

125 Data connection already open; transfer starting.

150 File status okay; about to open data connection.

200 Command okay.

202 Command not implemented, superfluous at this site.

211 System status, or system help reply.

212 Directory status.

213 File status.

214 Help message.On how to use the server or the meaning of a particular non-standard command. This reply is useful only to the human user.

215 NAME system type. Where NAME is an official system name from the list in the Assigned Numbers document.

220 Service ready for new user.

221 Service closing control connection.

225 Data connection open; no transfer in progress.

226 Closing data connection. Requested file action successful (for example, file transfer or file abort).

227 Entering Passive Mode (h1,h2,h3,h4,p1,p2).

230 User logged in, proceed. Logged out if appropriate.

250 Requested file action okay, completed.

257 "PATHNAME" created.

331 User name okay, need password.

332 Need account for login.

350 Requested file action pending further information

421 Service not available, closing control connection.This may be a reply to any command if the service knows it must shut down.

425 Can't open data connection.

426 Connection closed; transfer aborted.

450 Requested file action not taken.

451 Requested action aborted. Local error in processing.

452 Requested action not taken. Insufficient storage space in system.File unavailable (e.g., file busy).

500 Syntax error, command unrecognized. This may include errors such as command line too long.

501 Syntax error in parameters or arguments.

502 Command not implemented.

503 Bad sequence of commands.

504 Command not implemented for that parameter.

530 Not logged in.

532 Need account for storing files.

550 Requested action not taken. File unavailable (e.g., file not found, no access).

551 Requested action aborted. Page type unknown.

552 Requested file action aborted. Exceeded storage allocation (for current directory or dataset).

553 Requested action not taken. File name not allowed.

on Dec 03, 2009 | Computers & Internet

1 Answer

Access is denied


2½ possibilities immediately spring to mind:

½) Log in as administrator on the computer.  This may solve it.

1) The files may have attribute problems.  So try this:
-make yourself a new text file in the directory with the photos in.
-paste the following line into the text file:

attrib -r -a -s -h *.*

-save the text file
-rename the text file to attrib.bat
-You'll get a "are you sure" box.  Yep, you are.
-Double-click on the .bat file in windows explorer.  This should go through all the files in that directory and clear any attributes from them.

2) Folder permissions- Right-click on the folder in windows explorer and check that the read-only, system. hidden and archive boxes are all unticked.

3) Try zipping the files up.  You may then be able to move and manipulate the zip file to at least rescue the photos for later, even if your system won't let you at the images themselves.

Let me know how you get on.  Good luck!

Apr 10, 2010 | Microsoft Windows XP Professional

1 Answer

The message light on the MD110 is not working. I think I pressed something that disabled it. How to I get it back on?


detail_no-screenshot.gif Erlang R11B
Erlang is a full-featured programming language developed at the Ericsson CS Laboratory. more>> Erlang is a programming language designed at the Ericsson Computer Science Laboratory.
Open-source Erlang is being released to help encourage the spread of Erlang outside Ericsson.
Installation
When installed, the entire system, except for a small start-up script, resides in a single directory tree. The location of this directory tree can be chosen arbitrarily by the installer, and it does not need to be in the users $PATH.
The only requirements are that the file system where it is placed has enough free space, and that the users who run Erlang/OTP have read access to it. In the example below, the directory tree is assumed to be located at /usr/local/erlang, which is here called the top-level directory.
It is assumed that you have the compressed tar file, the name of which is < PREFIX >.tar.gz, where < PREFIX > is a string denoting the particular Erlang/OTP release, e.g. otp_LXA_11930_sunos5_R9B.
Wherever the string < PREFIX > is used below, it should be replaced by the actual name prefix of the compressed tar file.
The tape archive file does not have one single directory in which all other files are rooted. Therefore the tape archive file must be extracted into an empty (newly created) directory.
1. If the top-level directory does not already exist, create it:
mkdir /usr/local/erlang
2. Change the current directory to the top level directory:
cd /usr/local/erlang
3. Create the installation directory with an appropriate name. For example:
mkdir otp_r7b
4. Change to the installation directory, e.g.
cd otp_r7b
5. Assuming the compressed tar file resides in the directory ,. extract the compressed tar file into the current directory:
gunzip -c / .tar.gz | tar xfp -
6. Read the README file in the installation directory for last minute updates, before proceeding.
7. Run the Install script in the installation directory, with the absolute path of the installation directory as argument,
./Install /usr/local/erlang/otp_r7b
and supply answers to the prompts.
In most cases, there is a default answer in square brackets ([]). If the default is satisfactory, just press . In general you are only prompted for one thing:
- "Do you want to use a minimal system startup instead of the SASL startup?"
In a minimal system, only the Kernel and STDLIB applications are loaded and started. If the SASL startup is used, the SASL application is included as well. Normally, the minimal system is enough.
8. Make Erlang/OTP available for users, either by putting the path /usr/local/erlang/otp_r7b/bin in users $PATH variable, or link the executable /usr/local/erlang/otp_r7b/bin/erl accordingly, e.g.:
ln -s /usr/local/erlang/otp_r7b/bin/erl /usr/local/bin/erl
Enhancements:
- Among other things, SMP support was added.
<<less Download (10.3MB) Added: 2006-05-18 License: GPL (GNU General Public License) Price: 1259 downloads

Mar 05, 2010 | Lands Phones

1 Answer

Passworded user from old pc to new pc


How to take ownership of a file loadTOCNode(3, 'moreinformation'); You must have ownership of a protected file in order to access it. If another user has restricted access and you are the computer administrator, you can access the file by taking ownership.

To take ownership of a file, follow these steps:
  1. Right-click the file that you want to take ownership of, and then click Properties.
  2. Click the Security tab, and then click OK on the Security message (if one appears).
  3. Click Advanced, and then click the Owner tab.
  4. In the Name list, click Administrator, or click the Administrators group, and then click OK.

    The administrator or the administrators group now owns the file.
To change the permissions on the file that you now own, follow these steps:
  1. Click Add.
  2. In the Enter the object names to select (examples) list, type the user or group account that you want to have access to the file. For example, type Administrator.
  3. Click OK.
  4. In the Group or user names list, click the account that you want, and then select the check boxes of the permissions that you want to assign that user.
  5. When you are finished assigning permissions, click OK.
  6. You can now access the file.
How to take ownership of a folder loadTOCNode(3, 'moreinformation'); You must have ownership of a protected folder in order to access it. If another user has restricted access and you are the computer administrator, you can access the folder by taking ownership.

To take ownership of a folder, follow these steps:
  1. Right-click the folder that you want to take ownership of, and then click Properties.
  2. Click the Security tab, and then click OK on the Security message (if one appears).
  3. Click Advanced, and then click the Owner tab.
  4. In the Name list, click your user name, or click Administrator if you are logged in as Administrator, or click the Administrators group. If you want to take ownership of the contents of the folder, select the Replace owner on subcontainers and objects check box.
  5. Click OK, and then click Yes when you receive the following message: You do not have permission to read the contents of directory folder name. Do you want to replace the directory permissions with permissions granting you Full Control?All permissions will be replaced if you click Yes.

    Note folder name is the name of the folder that you want to take ownership of.
  6. Click OK, and then reapply the permissions and security settings that you want for the folder and its contents.

Source: Microsoft

Jan 21, 2010 | Microsoft Windows XP Home Edition

1 Answer

Mp3 player cannot copy audio files though i transfer it to mp3 format. the message display file or directory cannot be created.pls suggest solution


check if the memory is full or the file is too big to fit in. You might need to clear some files out. Be sure that your device is properly detected by your computer and you can access the files of your player. pls give feedback

Aug 19, 2009 | Audio Players & Recorders

1 Answer

Installing java applications and games


hey first of all you need a .jad file for all the java files.

download jad maker from here

http://www.brothersoft.com/jadmaker-25179.html

drag and drop the java files to the jad maker window to create a jad file for that particular java file.

once you're done copy both the java and jad files to the "other files" directory on the phone.

Now exit all menus and type in this code: *#9998*4678255#.You should now get a 'Activated' message. [This is to enable java installation.]

Then go to the other files directory where you placed the jad and java files. Open the .jad file and then click install.

Once the installation is done you can disable java installation by re-typing that code again.

Apr 11, 2009 | Samsung SGH-J600 Cellular Phone

1 Answer

How to use cmd ?


to use the command prompt, press the "start" and "R" keys on the keyboard.
On the small, "Run" screen, type cmd.
click ok.

type help in the command prompt. This should print a list of commands that you can use with it.
This is what it puts on-screen:
For more information on a specific command, type HELP command-name
ASSOC Displays or modifies file extension associations.
AT Schedules commands and programs to run on a computer.
ATTRIB Displays or changes file attributes.
BREAK Sets or clears extended CTRL+C checking.
CACLS Displays or modifies access control lists (ACLs) of files.
CALL Calls one batch program from another.
CD Displays the name of or changes the current directory.
CHCP Displays or sets the active code page number.
CHDIR Displays the name of or changes the current directory.
CHKDSK Checks a disk and displays a status report.
CHKNTFS Displays or modifies the checking of disk at boot time.
CLS Clears the screen.
CMD Starts a new instance of the Windows command interpreter.
COLOR Sets the default console foreground and background colors.
COMP Compares the contents of two files or sets of files.
COMPACT Displays or alters the compression of files on NTFS partitions.
CONVERT Converts FAT volumes to NTFS. You cannot convert the
current drive.
COPY Copies one or more files to another location.
DATE Displays or sets the date.
DEL Deletes one or more files.
DIR Displays a list of files and subdirectories in a directory.
DISKCOMP Compares the contents of two floppy disks.
DISKCOPY Copies the contents of one floppy disk to another.
DOSKEY Edits command lines, recalls Windows commands, and creates macros.
ECHO Displays messages, or turns command echoing on or off.
ENDLOCAL Ends localization of environment changes in a batch file.
ERASE Deletes one or more files.
EXIT Quits the CMD.EXE program (command interpreter).
FC Compares two files or sets of files, and displays the differences
between them.
FIND Searches for a text string in a file or files.
FINDSTR Searches for strings in files.
FOR Runs a specified command for each file in a set of files.
FORMAT Formats a disk for use with Windows.
FTYPE Displays or modifies file types used in file extension associations.
GOTO Directs the Windows command interpreter to a labeled line in a
batch program.
GRAFTABL Enables Windows to display an extended character set in graphics
mode.
HELP Provides Help information for Windows commands.
IF Performs conditional processing in batch programs.
LABEL Creates, changes, or deletes the volume label of a disk.
MD Creates a directory.
MKDIR Creates a directory.
MODE Configures a system device.
MORE Displays output one screen at a time.
MOVE Moves one or more files from one directory to another directory.
PATH Displays or sets a search path for executable files.
PAUSE Suspends processing of a batch file and displays a message.
POPD Restores the previous value of the current directory saved by PUSHD.
PRINT Prints a text file.
PROMPT Changes the Windows command prompt.
PUSHD Saves the current directory then changes it.
RD Removes a directory.
RECOVER Recovers readable information from a bad or defective disk.
REM Records comments (remarks) in batch files or CONFIG.SYS.
REN Renames a file or files.
RENAME Renames a file or files.
REPLACE Replaces files.
RMDIR Removes a directory.
SET Displays, sets, or removes Windows environment variables.
SETLOCAL Begins localization of environment changes in a batch file.
SHIFT Shifts the position of replaceable parameters in batch files.
SORT Sorts input.
START Starts a separate window to run a specified program or command.
SUBST Associates a path with a drive letter.
TIME Displays or sets the system time.
TITLE Sets the window title for a CMD.EXE session.
TREE Graphically displays the directory structure of a drive or path.
TYPE Displays the contents of a text file.
VER Displays the Windows version.
VERIFY Tells Windows whether to verify that your files are written
correctly to a disk.
VOL Displays a disk volume label and serial number.
XCOPY Copies files and directory trees.

this window is used only when the desktop cannot be accessed.
For a user-friendly interface (easier to use), use My computer to do common tasks.

Aug 25, 2008 | Microsoft Windows Vista Home Premium with...

1 Answer

File is not accessible. Access is denied message


Hi.
Sorry for the delayed responce. Ok first thing is first. The "files/folder is not accessible" occurs because the program cannot find the files in the place where they should be. for example if you put your socks in a draw and your wife moved it, when you return you wont have axcess to them right :) will basically its the same thing here. What you will need to do is find the default directory of itunes it should be in the Options or tools ir settings menu (I dont use itunes so i am not sure just play around in the program until you find it) once you do you need to search you computer for where the PC Backup put your files ..
click start then search and type the name or piece of the name of a song you know should be there. Once you find it browse to the directory of where the song is located. Click start then my computer then local disk to get to your harddrive. Go to the folder that has the songs and copy them. then paste them into the directory where itunes is looking for them.

Jul 06, 2008 | StompSoft BackUp My PC 2005 (05004) for PC

1 Answer

Problem w/ WIN2000 Pro & XP Pro


HERE IS THE SOLUTION :
click on the link given below and find oc25.dll....if you are unable to find press keyboard key cntrl + f .A dialog box will appear now type oc25.dll and hit find key and you will find the oc25.dll .click on that file to download it to your computer.

http://www.dlldump.com/dll-files/O_2.html

Once you have downloaded the file you are looking for you still need to make sure Windows or the program causing the error can find it. Follow these steps:

1. If you are encountering an error with Windows...
The file you downloaded needs to be placed into the Windows System directory. On most machines this is one of the following locations:
C:\Windows\System (Windows 95/98/Me),
C:\WINNT\System32 (Windows NT/2000), or
C:\Windows\System32 (Windows XP).

If you are encountering an error with a particular program...
The file most likely needs to be in this program's directory. This directory is where the program is installed (i.e. c:\Program Files\ThisProgram).

If this step solves the problem, you do not need to complete step 2.

2. You may to register this file with Windows. Click on the Start Menu and then on 'Run'. If you are replacing a Windows system file, type the following command:
regsvr32 \windows\system\file.dll (Windows 95/98/ME),
regsvr32 \WINNT\system32\file.dll (Windows NT/2000), or
regsvr32 \windows\system32\file.dll (Windows XP).

For example, 'regsvr32 \windows\system\apphelp.dll'

If you are replacing a file for another program, change the directory where appropriate. For example, 'regsvr32 \program files\Norton\xyz.dll'

If the file is registered correctly, you will receive a positive confirmation message.
-------------------------------------------
Please let me know your feed-back.

Thanks
dilipbagdi
Technical Associate

Apr 28, 2008 | Microsoft Windows XP Home Edition

Not finding what you are looking for?
Microsoft Windows XP Professional for PC Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

3015 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Alun Cox

Level 3 Expert

2678 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...