Question about Nortel NETWORKS CONTIVITY 1100 T1 WAN BNDL 5 Router

Open Question

Nortel 1001s secure router qos configuration

I have a nortel 1001s secure router i would like to configure qos on it
i managed to managed to configure qos but it seems not to be working as when i try to calculate or monitor my bandwidth i seem not to get any data,

here is a view of the running config of the router

R-KEN-BITU-001 > sh run Please wait... (up to a minute)module serial 1 cable_type v35 clock_rate 2000000 crc 16 mode dte clock_source line data_mode normal exit serialinterface ethernet 0 description "Bitumen LAN" ip address mtu 1500 qos exit qos exit ethernetinterface ethernet 0.1 description "Nortel Phones" ip address exit ethernet interface ethernet 1 description "KDN link to HQ" ip address mtu 1500 qos add_class NortelRTP root-out cr 40 br 128 add_class NortelDATA root-out cr 88 br 128 class NortelRTP add_src_ip exit class class NortelDATA exit class enable policing outbound enable policing inbound exit qos exit ethernetinterface bundle Bitumen exit bundleinterface bundle bitumen exit bundle hostname R-KEN-BITU-001log utctelnet_serverssh_server exit ssh_servertelnet_banner banner1 "TOTAL KENYA LIMITED" banner2 "BITUMEN PLANT" exit telnet_bannersystem display-boot-config noip load_balance per_flow route 1 dhcps pool Total-Bituen exclude-range exit pool pool Total-Bitumen domain dnsserver tftpserver netbios_name_server lease 604800 network default_router commit exit pool interface ethernet0 enable exit dhcps exit ipfirewall global algs exit algs max-connection-limit self 2048 exit firewallfirewall internet exit firewallfirewall corp policy 1024 out permit exit policy exit firewalltftp_servergui enable exit guisnmp-server snmp-enable community bituro ro community biturw rw location Bitumen-Plant chassis-id R-KEN-BITU-001 trap-version 1 exit snmp-serverplease assist in any way as im being fried on this...pleasethank you

Posted by on

  • Anonymous Oct 29, 2008

    sorry shared ebook of qos nortel SR1002 of knowledge



6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 72 Answers

SOURCE: Nortel 3120 Secure Router

NetFlow is a network protocol developed by nortel Systems to run on router IOS-enabled equipment for collecting IP traffic information

Posted on Jan 04, 2010

  • 82 Answers

SOURCE: how to configure STACK IP on nortel 2526t IN USE

for the answer to the query log on to the web site

Posted on Feb 10, 2010

  • 1 Answer

SOURCE: how to connect Nortel BSR222 (Business Secure Router 222) with tplink

Iam using nortel secure router 1001s. using v.35 cable iam connecting my router to ASM i52 RAD modem. serial int is down. but when iam connecting the same router with same v.35 cable with other mlln modem, link is up. but in RAD modem connecting a cisco router, link is getting up

Posted on Mar 24, 2010

  • 116 Answers

SOURCE: Do you have an example config of an ACL that will

all acl's have an "invisible" deny all statement at the end, so you construct your acl with the denied items first and then a "permit all" at the end.
I'm not familiar with the Motorola syntax, but a Cisco one would be as follows:
access-list 100 deny tcp any any eq 23
access-list 100 permit ip any any
the list is then applied to the interface.

Posted on Mar 30, 2010

  • 209 Answers

SOURCE: Hi Team We replaced our existing

As you described it there shouldnt be any problems with your configuration, there should be auto ip conf. enabled so VoIP phones should accept 1st IP range automatically. If that doesnt help contact your operators. Thats all. Good luck!

Please rate my solution! :)
Aleksandar Adzic

Posted on Aug 23, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a nortel tasman 1004 with 1 t1 port licensed. I need to have it reconfigured to a new location with new ip address and updated software if possible... I have tried to program it myself and keep...

Here are some commands to configure your tasman router :
tasman> sh configuration runn Please wait... (up to a minute)

terminal exit terminal qos exit qos module t1 1 clock_source line alarms thresholds exit thresholds exit alarms linemode exit linemode exit t1 module t1 2 clock_source line alarms thresholds exit thresholds exit alarms linemode exit linemode exit t1 interface ethernet 0 ip address 66.201.12.x <------- for example ip multicast ospfrip2 icmp exit icmp qos exit qos vrrp_mode 0 exit ethernet interface ethernet 0.1 ip address <------ for example ip multicast ospfrip2 icmp exit icmp qos exit qos vrrp_mode 0 exit ethernet interface ethernet 1 icmp exit icmp qos exit qos exit ethernet interface bundle MFR1 link t1 1 link t1 2 encapsulation frelay fr intf_type dte frame_size 4470 mfr fragment_size 4000 mfr seg_threshold 3999 lmi ansi exit lmi pvc 500 shaping cir 3072000 bcmax 3072000 bcmin 65536 no policing ip address <------ WAN IP address to ISPicmp exit icmp red exit red exit pvc exit fr icmp exit icmp qos exit qos exit bundle aaa radius exit radius exit aaa snmp system_id tasman1 enable_trap exit enable_trap exit snmp hostname tasman telnet_banner exit telnet_banner event exit event system logging syslog exit syslog exit logging ip load_balance per_flowroute 15.10.16. 85 1exit ipfirewall globalalgsexit algsmax-connection-limit self 2048exit firewall firewall internetexit firewallfirewall corppolicy 1024 out permitexit policyexit firewallpolicy community_list exit community_list tasman>

Or use the link below:

Dec 04, 2011 | Nortel Networks SR1004 4P ACTIVE T1 ...

1 Answer

We have an Accelar 1200 and we would like to get software to configure/manage the device.

contact Nortel ... send a mail to supportand they'll tell u where & what,
otherwise give them a call, they're all very helpfull, had contact with their volks many years ago and also some training courses there, if they dont help, contact me via here, FIXYA and i'll help you wherever i can



Mar 04, 2011 | Nortel Networks Optivity Switch Manager...

1 Answer

Looking to join two Nortel MICS pbxs using E&M 8 wire cards and cisco Vic2-2e/m cards with the two cisco boxes both plugged into the public internet and faking an E&M channel so the nortel switches...

There is another web forum that specializes in this type of task, they are a group of techs... the forum is called Tek-tips(dot)com...

This is for techs that have major issues and need connections to other techs in the field.

Under the Search: look for Nortel and Norstar systems.

May 12, 2009 | NorStar M2616 PBX Phone

1 Answer

I forgot my password

Find and depress the reset button on the bottom/back of the unit to hard-reset the router to factory defaults. Note: this will lose all user configured options but will set the login for the router back to defaults. Check your owners manual for the default login and configuration options.

From what I have been able to research on this router, the username and password for this router may be:
USERNAME: sysadmin
PASSWORD: nortel

But this information is unconfirmed.

Mar 04, 2009 | Nortel Networks BSGX4e Business Services...

1 Answer

Nortel 3120 Secure Router

NetFlow is a network protocol developed by nortel Systems to run on router IOS-enabled equipment for collecting IP traffic information

Jan 30, 2009 | Nortel 3120 Router (SR2102002E5)

1 Answer

NSF 5111 NE1

Its a pretty easy installation. For your ref. i have attached the user guide link.

Let me know your queries on the same.

Dec 16, 2008 | Nortel NSF 5111 SWITCHED FIREWALL FIREWALL...

2 Answers

How to connect Nortel BSR222 (Business Secure Router 222) with tplink

rj11 are connectors used to deliver signals to a device. Mostly, modems will be able to support this type of connection. Make use of a modem, bridge it and connect the router to it.

Aug 17, 2008 | Nortel NETWORKS CONTIVITY 1100 T1 WAN BNDL...

1 Answer

Nortel Extranet VPN using ESP IPSec

Step 1 Go into the web-based configuration on the router (enter in your web brower). Enter username (admin) and password (blank). Step 2 Click on Advanced at the top and then click on Applications on the left side. Step 3 Check Enable Step 4 Enter a name (i.e. Nortel). Step 5 Enter 500 for Trigger Port (500 - 500). Step 6 Select Both for Trigger Type. Step 7 Enter 500 for Public Port. Step 8 Select Both for Public Type. Step 9 Click Apply and then click on Continue when prompted.

Feb 16, 2006 | D-Link Express EtherNetwork DI-604 Router

1 Answer

Nortel Contivity VPN client?

Nortel Contivity will work with the your D-Link router, however its functionality depends on the authentication type (AH will not work), NAT compatibilty mode, and disabling keep alives on the server. Contact your Network Administrator to find out how your VPN is configured. Step 1 Verify that you are using the latest version of firmware on your router. Step 2 Login to the Web Management for your router by entering its IP address ( in your web browser. The default username is admin, and the password is blank. Step 3 Click the Advanced Tab to access the Virtual Server Settings. There is a list of pre-defined Virtual Server Rules towards the bottom of the page. Find the IPSec Rule. Click the pen and paper icon to edit its settings. Enable the rule, enter the IP address of the computer attempting to connect to the VPN in the Private IP field, then Apply the changes. Step 4 Create a new Virtual Server entry. Name the Virtual Server, "NortelVPN". Enter the IP address of the computer attempting to connect to the VPN in the Private IP field. For the Protocol Type, select Both. Enter 9550 for both the Public and Private Ports. Set the Schedule to always, then Apply the settings. Step 5 Access the Tools Page, then click the Misc button. Disable IPSec Pass-through, then click Apply. If the VPN Server is properly configured to work with clients behind NAT routers you should be able to connect to the VPN.

Feb 16, 2006 | D-Link Express EtherNetwork DI-604 Router

Not finding what you are looking for?
Nortel NETWORKS CONTIVITY 1100 T1 WAN BNDL 5 Router Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nortel Computers & Internet Experts

J John

Level 2 Expert

286 Answers

Gopi Venkatesan
Gopi Venkatesan

Level 2 Expert

74 Answers

Jax Planet
Jax Planet

Level 2 Expert

922 Answers

Are you a Nortel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides