Question about Ricoh Office Equipment & Supplies

5 Answers

How to fix the error code for Ricoh 1232c sc517 and how to clear it

Posted by on

  • 4 more comments 
  • psda7 Oct 29, 2008

    This is a Ricoh 1232c copier

    error code is ( SC 517)

  • psda7 Oct 29, 2008

    I have a Ricoh 1232c copier
    Error code sc517
    How to fix it and how to clear the error from the memory

  • psda7 Oct 29, 2008

    I did unplug the machine for a five hours and plug it back on

    error did come back. Is there any other way I can clear the memory.

    Which is the SC517 error related to.



    Paul

  • psda7 Oct 30, 2008

    I am trying to get a fix for the error code SC517 for Ricoh Aficio 1232c copier
    can some one help to fix the problm
    and also how to clear the code from the copier

    Thanks

  • psda7 Oct 30, 2008

    The error code is SC571

    sorry for typing error

    Ricoh 1232c copier how to clear the error code

  • psda7 Oct 31, 2008

    no I am still looking for help with the problem

×

5 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 507 Answers

There's no error code like that
http://www.unitedtechsonline.citymax.com/page/page/4653767.htm

101: EXPOSURE LAMP PROBLEM

120:SCANNER HOME PROBLEM

121:SCANNER HOME

124:SCANNER MOTOR PROBLEM

125:SCANNER MOTOR PROBLEM

126:SCANNER MOTOR PROBLEM

127:SCANNER MOTOR PROBLEM

129:SCANNER MOTOR PROBLEM

130:SICU / SBU PROBLEMS

300:CHARGE CORONA PROBLEMS

301:CHARGE CORONA PROBLEM

303:CHARGE GRID PROBLEM

304:CHARGE GRID PROBLEM

305:CHARGER UNIT WIRE CLEANER PROBLEM

306:CHARGER UNIT WIRE CLEANER PROBLEM

310-316:DRUM POTENTIAL SENSOR ERROR ISSUES

321:LASER UNIT WRITE PROBLEM

322:LASER UNIT 1 SYNCH. PROBLEM

323:LASER UNIT DRIVE PROBLEM

335-338:POLYGON MOTOR PROBLEMS

340-342:TONER DENSITY SENSOR ERROR ISSUES

345:DEVELOPER BIAS PROBLEM

350-355:IMAGE DENSITY SENSOR PROBLEMS

360:HARD DISK 1 PROBLEM

361:HARD DISK 2 PROBLEM

362:HARD DISK 1 PROBLEM

363:HARD DISK 2 PROBLEM

364:HARD DISK 1 PROBLEM

365:HARD DISK 2 PROBLEM

366:HARD DISK 1 PROBLEM

367:HARD DISK 2 PROBLEM

370-375:IMAGE COMPRESSION ERROR

376-377: SICU,IMAGE COMPRESSION ERROR

380-383:IMAGE DATA TRANSFER PROBLEM(SICU, SBU,PRINT CONTROLLER)

384-385:IMAGE DATA TRANSFER PROBLEM WHEN TANDEM IS USED(SBU,INTERFACE

BOARD,SICU,PRINT CONTROLLER)

390:TANDEM IMAGE DATA TRANSFER ERROR(NOISE,SICU,INTERFACE BOARD)

391-392:IMAGE STORAGE ADDRESS ERROR(SICU391-01)

395:CD-R/RW ERROR, INTERFACE BOARD ISSUES

397:CD ACCESS ERROR

398:CD-R/RW DATA ERROR

400:TRANSFER BIAS ROLLER ISSUES

401:TRANSFER ROLLER

430:QUENCHING LAMP ERROR

440:DRUM MOTOR LOCKED

441:DEVELOPER MOTOT LOCKED

491:LASER COOLING FAN LOCKED

495:TONER BOTTLE PROBLEM

496:TONER COLLECTOR BOTTLE PROBLEM

501:LIFT PROBLEMS FOR TRAY 1

502:LIFT PROBLEMS FOR TRAY 2

503:LIFT PROBLEMS FOR TRAY 3

504:LCT 1ST TRAY PICKUP OR LIFT PROBLEM

505:LCT 2ND TRAY PICKUP OR LIFT PROBLEM

506:LCT 3RD TRAY PICKUP OR LIFT PROBLEM

510:PAPER FEED MOTOR PROBLEMS

511:LCT MOTOR PROBLEM

515:TANDEM REAR FENCE MOTOR PROBLEM

520-521:DUPLEX JUGGER MOTOR PROBLEMS

531:FUSING DUPLEX MOTOR LOCKED

532:RELAY MOTOR LOCK

541:OPEN FUSER THERMISTOR

542:LOW FUSER TEMPERATURE

543:HIGH FUSER TEMPERATURE

544:HIGH FUSER TEMPERATURE

545:HIGH FUSER TEMPERATURE

546:LOW FUSER TEMPERATURE

547:ZERO CROSS PROBLEM

550:WEB EXPIRED

591:TONER SUPPLY MOTOR PROBLEMS

592:TONER BANK MOTOR PROBLEMS

601:SBICU TO SBU COMMUNICATION PROBLEMS

602:SBICU TO HARD DISK DRIVE BOARD COMMUNICATION PROBLEMS

620-622:SBICU TO ADF COMMUNICATION PROBLEMS

625-626:BCU TO FINISHER COMMUNICATION PROBLEMS

630:LINE ADOPTER TO CSS CENTER COMMUNICATION PROBLEMS

640-645:BCH TO SICU COMMUNICATION PROBLEMS

646:SICU PROBLEM

650-653:COUNTER ERROR JAPAN

701:ADF P/U ROLLER PROBLEMS

702:ADF FEED MOTOR PROBLEM

703:ADF TRANSPORT BELT MOTOR PROBLEM

704:ADF EXIT MOTOR PROBLEM

705:ADF ORIGINAL TABLE LIFT ISSUES

720:FINISHER LOWER TRANSPORT MOTOR ISSUES

722:FINISHER JOGGER MOTOR ISSUES

724:FINISHER STAPLER HAMMER PROBLEMS

725:FINISHER STACK EXIT MOTOR PROBLEMS

726:FINISHER SHIFT MOTOR PROBLEMS

727:FINISHER STAPLER ROTATION PROBLEMS

729:FINISHER PUNCH MOTOR PROBLEMS

730:FINISHER STAPLER MOTOR PROBLEMS

735:FINISHER PAPER STACK PLATE MOTOR PROBLEMS

736:FINISHER EXIT GUIDE MOTOR PROBLEMS

737:FINISHER FULL STAPLER HOPPER

738:FINISHER SHIFT TRAY LIFT MOTOR PROBLEMS

739:FINISHER FOLDER PLATE MOTOR ERROR

740:FINISHER FRONT SADDLE STITCH STAPLER MOTOR PROBLEMS

741:FINISHER REAR SADDLE STITCH STAPLER MOTOR PROBLEMS

742:FINISHER JOGGER SIDE FENCE MOTOR

750:COVER INTERPOSER BOTTOM PLATE MOTOR PROBLEMS

800:VIDEO OUT TRANSFER,CONTROLLER BOARD

804:VIDEO OUT TRANSFER,CONTROLLER BOARD

818:OPTIONAL BOARD,CONTROLLER BOARD, SYSTEM PROGRAM

819:BAD SOFTWARE

820:CONTROLLER BOARD OR SOFTWARE

821:CONTROLLER BOARD

822:HDD PROBLEM

823:NIB, CONTROLLER BOARD

824:CONTROLLER BOARD, NVRAM

825:NVRAM ERROR

826:NVRAM

827:CONTROLLER BOARD, RAM

828:SOFTWARE,ROM,CONTROLLER

829:RAM, CONTROLLER

835:CONTROLLER,CENTRONIC LOOPBACK CONNECTOR

836-837:FONT DEVICE

838:CONTROLLER BOARD

850:IP ADDRESS,CONTROLLER BOARD,NIB

851:1394 I/F CONNECTIONB,I/F INTERFACE,CONTROLLER BOARD

860-861:HDD

862:HDD BAD SECTORS

863:HDD

864:DATA TRANSFER ISSUES

865:HDD

900:NVRAM PROBLEM.ELECTRICAL COPY COUNTER

901:MECHANICAL COUNTER ISSUES

921:IMB, BICU FAILING

922:IMB, BICU FAILING

924:DRAM,BICU,IMB FAILING

925:BICU, IMB FAILING

926:BICU, IMB FAILING

951:F-GATE SIGNAL ERROR PROBLEMS

953:SCANNER IMAGE SETTING ERROR ISSUES

954:PRINTER IMAGE SETTING ERROR ISSUES

955:MEMORY SETTING ERROR ISSUES

964:PRINTER READY ERROR ISSUES

966:POLYGON MOTOR PROBLEM

970:SCANNER READY ERROR

980:HDD ACCESS ERROR

981:BICU, NVRAM

982:HDD CONSTRUCTION ERROR

984-987:HDD DATA TRANSFER ERROR

990:SOFTWARE PERFORMANCE ERROR

991:REBOOT SOFTWARE ERROR

997-998:DIMM, RAM ERROR

999:PROGRAM DOWNLOAD ERRORS

Posted on Oct 30, 2008

  • William Nabaza
    William Nabaza Oct 30, 2008

    according to this error code manual there's no such thing
    http://www.manuals4you.com/weekly/Ricoh-... Error Codes.pdf

    according to others it's "Fuser oil overflow"
    It seems the fuser oil in the tray under the fuser all runs to one side but, if I recall correctly, the sensor is in the bottom tray of the fuser. I usually use post-it notes to level the printer. It's easy to get just the right amount of lift by sticking a pad(or part of one) under the feet of the printer on the low side.

  • William Nabaza
    William Nabaza Nov 01, 2008

    go to this page

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,952 Answers

Technical problems with .., help you understand error messages and questions relating to ... http://www.ricoh.co.uk/KBase/index.cfm

Posted on Oct 30, 2008

  • mohammed marika thambi
    mohammed marika thambi Oct 30, 2008

    Restart the OS.

    If it happens again after the restart, contact your local service representative.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,614 Answers

Try to unplug the unit for at least for hours. this will reset the last setting have made on the unit before the problem occurred.

let me know.

Posted on Oct 29, 2008

  • micromaster
    micromaster Oct 29, 2008

    well if you still have access on the menu setting. you can either reset the unit remotely there.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,142 Answers

May i know the exact error message you get on the printer

Posted on Oct 29, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 558 Answers

Try to reinstall the Printer, although it is a cumbersome task to get reinstall it, but let it try:
If you dont have the Setup CD for printer use this link:
Ricoh 1232C
Also read the instructions given by me in this link: Printer Tips n Tricks
Also look out the FAQ provided by RICOH : FAQ and put a question 
Let me know if you need further assistance.

Posted on Oct 30, 2008

×

3 Suggested Answers

Bubbabear64
  • 2794 Answers

SOURCE: For Ricoh 1232c copier error SC517

See previous threads on how to clear.

Posted on Nov 06, 2008

  • 81 Answers

SOURCE: Copier Ricoh 1232c error code sc517

"yellow clear" then press 1 0 7 and hold down stop.. go into copy sp and enter 7 8 0 7 and then press " # " press the execute button.. when it says done power down from the red switch.. then power back up.. that will clear the error.. but you may need parts if the error returns

Posted on Jul 07, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ricoh 1232c sc 672


The correct way to get into service mode is to first press the Yellow "CLEAR" button then press the numbers 1 >0>7 then press and hold the Red "STOP" button.... Good Luck

Jun 08, 2012 | Ricoh Aficio 1232C Color Copier

1 Answer

Comment enlever message sc 570 sur ricoh 1232c


This error code is related to a Insufficient oil.
The fusing oil tank is in the rear of the machine.
You have to call Ricoh to supply the oil.
See you

Mar 29, 2011 | Ricoh Aficio 1232C Color Copier

1 Answer

I have a ricoh 1232C multifunction and it has just stopped working and gives an error code sc440 " Functional Problem with the copier "


The problem is Main motor error.


The problem can be two diffrent things.

1. Defective main motor
2. Too much load of the main motor drive

Oct 18, 2010 | Ricoh Aficio 1232C Color Copier

1 Answer

ERROR SC 570 RICOH AFICIO 1232C HOW CAN I FIX


Hello,

The machine has no fuser oil.
Fill the little tank at the back side of the machine. If the tank is full, check the tubes, oil pump, and oil sensor.
Reboot the machine to clear the SC.
The problem will be solved


Aug 10, 2010 | Ricoh Aficio 1232C Color Copier

1 Answer

Need to clear the memory of a Ricoh Aficio 1232c copier, it is printing out random copies of some kind of code, can't find manual...help.


you do not need to clear the memory print the configuration page and see which driver is supported:
it can [RPCS] or [PCL 5e] or [PCL 6e] or [PostScript]
if you are using the driver which the machine does not support she will print documents as you say some kind of codes.

Jan 20, 2010 | Ricoh Aficio 1232C Color Copier

1 Answer

Serice code 792


E721 Sorter stapler bin lift sensor E722 Sorter stapler jogger sensor E723 Sorter stapler grip sensor E792 Sorter stapler error

Mar 20, 2009 | Office Equipment & Supplies

1 Answer

Ricoh Aficio 1232c copier error code SC571


Enter SP 5-810 and set to 1, then switch off and on the machine.

Oct 30, 2008 | Office Equipment & Supplies

1 Answer

For Ricoh 1232c copier error SC517


See previous threads on how to clear.

Oct 29, 2008 | Office Equipment & Supplies

1 Answer

Copier Ricoh 1232c error code sc517


"yellow clear" then press 1 0 7 and hold down stop.. go into copy sp and enter 7 8 0 7 and then press " # " press the execute button.. when it says done power down from the red switch.. then power back up.. that will clear the error.. but you may need parts if the error returns

Oct 29, 2008 | Office Equipment & Supplies

1 Answer

Ricoh 1232c copier error code sc 517


The error is about the fusing unit for to reset the code you must enter into the service menu and reset the SC code 517
For to enter the service menu you should do the follow steps :
1.Enter the service menu by pressing the follow keys in order: yellow key[clear modes] then press "107" number one after other and then press and hold the red key [clear/stop]
2.Hold it down until service mode do not appear if not appear after 10 seconds try again.
After you will be in service mode press the follow numbers :5810 and then will apear on the screen "SC reset" set the value from "0" to "1".
Then turn off and after 5 seconds turn it on the machine.
Please replay if this do not help and write the SC code good because i cannot find the code SC517

Oct 29, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

2,181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

quennie732

Level 2 Expert

393 Answers

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

183 Answers

Bernard D'Souza

Level 2 Expert

161 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...