Question about DVD & Blu-Ray Players
I have a Pioneer XV-DV 505. When i try too turn it on, there is a green clock who is flashing. I cant turn it on.......... Anyone who have a solution ?????
Posted on Jan 19, 2008
This is a common problem for this model. It has a memory IC that must be replaced. This is a surface mounted IC that requires exceptional soldering skills to replace. I work at an authorized Pioneer service center and have repaired a good number of these for this exact problem. Unless you have great soldering skills it is not something that should be attempted to do yourself, it can cause permanent damage to the board if not done perfectly.
If you have the proper skills and soldering equipment I will be happy to give you the Pioneer part number so you can replace it yourself. If not, then you really should just take it to a service center and have a professional do this.
Let me know if you would like that part number.
Posted on Dec 12, 2008
From another site...
Region code hack posted by mairel, December 18 2007:
A greeting to all, good after point to look for and to break the head, I could convert to multizona my DVD, I count them that I stay fillet. here they go them the procedures, I hope it serves them. 100% guaranteed.
1. Turn on
2. Open the tray
3. Press 0000 in RC
4. Change to any region you want 0 for region free
5. Press Pause
6. Turn off
7. Turn on again and enjoy
Posted on May 15, 2009
Tips for a great answer:
May 14, 2014 | DVD & Blu-Ray Players
Jun 27, 2009 | JVC XV-S42 DVD Player
52 people viewed this question
Usually answered in minutes!