Question about AEG 10.35 cu. ft. / 293 liter Upright Freezer Arctis A75320GA

Open Question

AEG Arctis Freezer Frostamatic. Tall floor standing. circa 5-6 years old.

Help. My icecream which was in a pot in the top was liquid however ice cubes at bottom of top area frozen. Not sure it is working correctly.
Stuff in bottom seems frozen but crumpets in middle are semi frozen.
What should I do? Replace with a new or pay £65 call out to a local guy?
Who on the phone didn't seem to have any clue as to what it might be.
Mobile : 07989 565 074 - Julie

Posted by on

1 Suggested Answer

  • 2 Answers

SOURCE: My AEG Arctis freezer is not freezing at the

The freezer is probably in need of defrosting. This usually occurs when the freezer has been over packed. It needs to be able to ahve air flow through it, there are holes in the back of the freezer and a defrosting element at the top and they need to be clear in order to keep it frost free. It happend to me and we called an engineer out. solved it by using hair dryer to defrost it.

Posted on Apr 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Jenn-Air Refig with the freezer on the bottom. The ICE maker is not working and I think it might be frozen. How do I disconnect the ice maker so i can thaw it out?


Why not do a quick thaw and move the frozen goods over to the firdge for a few minutes and grab a blow dryer. This should give a temporary fix until you can pin point the problem. Be kind to me please with a Thumbs up. I am a long ways away and can only help a little. Raz

Apr 09, 2010 | Jenn-Air Freezer Jenn Air Clear Cube Ice...

1 Answer

Sears Freezer, Model 253 9284013-unable to locate manual, nor online. Freezer did not maintain freezing level, fish thawed slightly, dripping liquid onto bottom interior. It froze over. On bottom, at the...


Your problem could be caused by a clogged drainage tube. even though you may have removed the ice it may still have a clog. my suggestion would be to take all of the contents out of your fridge and let it sit unplugged for atleast 24-48 hours with the doors open this will eliminate any left over ice that may be clogging your drain tube. if this dosent help then you may have a defrost heater problem, or possibly a defrost termination switch problem. as for the smell i know that vinegar works well for getting rid of odor. ther eis also a product you can purchase called fridge aid, it is a charcoal based air purifier and should work well.

Oct 11, 2009 | Kenmore Freezers

1 Answer

Cannot open bottom freezer drawer. Ice in tray


remove all food from fridge and take it outside. leave it outside until ice is melted. this is the procedure and i have to do it every day im a Refrigeration Mechanic.

Oct 09, 2009 | Sub-Zero 19.3 cu. ft. / 547 liter Upright...

1 Answer

Kenmore freezer not making ice


Pour about 1/2 cup of water into icemaker ( unless ice is already there ) . If the icemaker dumps the cubes , then the water valve is bad . If it doesn't dump , and holds the frozen cubes , replace the icemaker . Also check your coils to make sure they are clean from dust , lint , etc . Check the fill tube going to the icemaker , to make sure it isn't frozen with ice . If it is , then watervalve is still bad (leaking ) .

Aug 25, 2009 | Kenmore Freezers

1 Answer

Maytag ice maker makes ice cubes but when its time to eject, either a cube gets stuck in between the rake or it gets frozen up and you hear the gears trying turn. You will see a frozen mess or cubes and...


I would first try turning the temperature down on your freezer before considering buying any parts. Your ice is freezing before it is reaching the position to dump in the bin. Also, if you have any items packed around the area where you ice maker is, try to free up a little space around it. If that does not work I would call the manufacturer, they will be more than happy to walk you through any problems you may be having with there products.

Aug 04, 2009 | Maytag Freezers

1 Answer

Im45le-25 defrost appears to go to long thus deforming evaporator probe holder & damaging probe as wont go into harvest mode .does machine use time as well if probe etc fail


Yes, the sensor detects the temperature of the evaporator plate then the PCB reverts to the adjustable timer. Check the probe in a glass of ice water. the reading should be between 5-7k ohms. if out of this range replace the probe. also check heat transfer paste is on holder and good contact is made probe to plate.
Be sure you are adjusting the pot the correct way as the large refers to the dimple in the cube not the thickness of the cube. ie its backwards to the initial thinking.

Mar 31, 2009 | Hoshizaki Freezer Commercial Ice Machines...

1 Answer

GE top freezer refrigerator automatic ice cube maker leaks water into the freezer, and eventually on the floor. Water seems to be coming from the area that fill up to make more ice cubes.


If it is leaking water in the freezer it will more than likely freeze amongst the ice cubes causing a block of ice.

It is more than likely leaking at the rear of the unit, near the valve or fill tube for the ice, this will run up the rear wall of the unit.

Mar 12, 2009 | GE Freezers

5 Answers

Ice Cubes won't drop


Something is holding your Ice Slab at the bottom from your description.
Some causes are
1 Dirty - scaled up evap, or just dirty w muddy covering,
2 the vacuum breaking holes are stopped up If it is making a sla whith the evaporator warm no ice take a flashlight and hold it where its shining to the back of the evap and look for the light on th cube forming slots next to the ones your shining the light into Upper corners of each hole must be open.
3 The slab is freezing uneve most like cause is a stopped up distributor tube at the top thats feeding the water down the evaporator.
4 On some models thay had a closer fitting water curtian (the cover in front of the slab) and the top of the sheet touched this and caused the slab to stay uprite and continue the "slide" forward.If your curtian is of the older style and has metal hooks on it with verticle slots n the curtian look at the slots and see if the slots are worn making the whole curtian slide down ward I have seen this several times.4B On some older models there is also a plactic coated wire diverter on the bottom infront of the evaporator. If the palstic coating is gone or the bottom or is not even, the slab could hang up there. 4C If you have the newer plastic pins make sure thay are seated in the mounting properly.
5 Nickel plating could be comming off (any copper color on the lower 1/3 of the evaporator?).
6 I have seen some of the horizontal plates them selves be loose and not in flush try pushing and pulling on them especially the ones at the bottom. ANy that are loose and comming out is your problem.
This lengthy extrapolation is by no means all of the possibilities but most of the common ones. If this helps you solve your proble please rate me accordingly. If it leads you to the correct and completed repair WOULDNT WE MAKE A TEAM?? And Good luck to you.

Feb 13, 2009 | Hoshizaki Commercial Freezer KM-500MAH

1 Answer

Freezer not keeping things frozen


Hi Jody,
The only thing you give me that would allow me to solve this issue, is based on the fact that the freezer is getting warmer, and fresh food section is staying cold. So, knowing nothing more than that, I must sadly say that you need a new refrigerator to solve this issue 100%, as it sounds like you have a failing compressor, or a slow leak in the sealed system. Both scenarios are terminal.
Thank you for contacting me at Fixya.com
Dave E. (Illeagle)

Jun 12, 2008 | Freezers

1 Answer

Ice cube cycle time very high


i suspect a defective liquid line or pump down seleonid coil. just make sure you hear the "click" when it starts up if not the selenoid coils could be defective. also verify that the condenser fan is running,because if not you are short-cycling on high head pressure. please contact if you need any additional info

Jun 11, 2008 | Hoshizaki Commercial Freezer KM-500MAH

Not finding what you are looking for?
AEG 10.35 cu. ft. / 293 liter Upright Freezer Arctis A75320GA Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top AEG Freezers Experts

Gil Shultz

Level 3 Expert

3320 Answers

Victor Nwachukwu
Victor Nwachukwu

Level 2 Expert

152 Answers

AJMAL KHAN

Level 2 Expert

382 Answers

Are you an AEG Freezer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...