Question about Standard (CRT) Televisions

1 Answer

Standby mode Sir, What could lead for TV set to be on standby mode after few seconds without be timed? It will turn On but after few seconds, it will be in standby mode. Athough, it was not turned on for 5days. Please, assist me to solve this.

Posted by on

  • 1 more comment 
  • olise Oct 29, 2008

    What could lead for TV set to be on standby mode after few seconds without be timed? It will turn On but after few seconds, it will be in standby mode. Athough, it was not turned on for 5days.

    Please, assist me to solve this.

  • olise Oct 29, 2008

    LG 21'' LCD TV and visualSlim

  • olise Oct 30, 2008

    sorry,



    The product and model of the television is: LG 21FU1RG





    Thank you.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

What brand and model??

Posted on Oct 29, 2008

  • lynberd Nov 02, 2008

    Check the tackswitch of the tv itssame to be leaky,if not solve the problem replace the memory ic

×


Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Please my tv with on the standby mode when i try to put it back it couldn't the indicator now goes on and off with picture show please help


The standby light on a Sony television indicates when the television is turned on and operating, or turned off and in "standby" mode. However, this light also serves a secondary function: indicating when there is a problem with the television by flashing. When the standby light begins to flash, there are two reset options that can be performed to resolve whatever issue it's indicating -- a power reset and a factory reset

POWER RESET
1. Turn off your TV
  • 2. Unplug the television from the electrical outlet. If you're using a surge protector or power strip, disconnect the television from the strip itself. Only by disconnecting the power cord from the outlet can you ensure no power reaches the TV during the power cycle.
  • 3. Leave the television without power for at least 60 seconds. This gives the television enough time for all components to power down during the power cycle
  • 4. Plug the television back into the electrical outlet. If you're using a surge protector or power strip, plug the television directly into the wall outlet instead. The surge protector may otherwise interfere with the power-up cycle, especially if it is old or damaged.
  • 5. Turn on the television. If the blinking standby light continues, you'll need to move on to the factory reset process.

  • FACTORY RESET
  • 1. Turn on the television.
  • 2. Press and hold either the "Reset" or up arrow button on the remote control.
  • 3. Press and release the "Power" button on the front of the television, while keeping the "Reset" or up arrow button on the remote depressed.
    4. Release the "Reset" or up arrow button.
    5. Allow the television to reset after the "Reset" message appears on the screen.
    6. Make no adjustments to the television for at least one minute after the reset has completed. This is to allow the television time to finish auto-configuration and initial set up.
    7.Turn off the television and unplug the power cord from the electrical outlet.
    8. Wait ten seconds, then plug the television back into the electrical outlet and turn on the TV.
    9. Follow all on-screen instructions to complete setup. These are the instructions displayed the first time you set up the television, for configuring channels, menu language, time, display properties and more.
  • Dec 30, 2014 | Sony FD Trinitron WEGA KV-32FS120 32" TV

    8 Answers

    My matsui tv 28WNO5(A) will not turn on from standby


    Try pressing the small reset button on the back, it works, and you will not loose any stored information which caused the unit to go in the stand by mode.

    or
    Have you tried turning it off for an hour and then turning it back on. This happens to me quite often and leaving it off for a while ususally allows it to come back on. Also have you tried to press the TV/AV button on the remote as sometimes it switches to TV mode when its on standby and then standby won't work as its on TV mode and needs to go back on to AV mode. Basically just press the AV button on the digibox remote and then try standby.

    or
    if the batteries are removed and left for about 20 minutes before being replaced again, everything works as it should.
    or
    if any of the above suggestions does not work then you have to open the unit and on the main board of the tv there is a thin mini tube light like component called fuse you will have to replace that fuse .the fuse is very very cheap and you can easily get it at any electronics shop.and if still the unit does not work then there is a major fault in the power supply board and should be taken to the service center for diagnosing the fault that it is repairable or not.but i hope the above information provided will definately help you to solve your problem.

    Oct 04, 2008 | Sony KV-32XBR85 TV

    1 Answer

    Sony tv turns off


    ahh..the 16 blinker..that's a clear sign that your control board is having a terrible 'hair' day. How old is the TV?

    Feb 13, 2008 | Sony KD-32FS170 32" TV

    1 Answer

    KV-24FS100 TV shutting off


    How many times the standby light flashes in between switch ON and going OFF?
    For more details about this fault, visit this site, and call older posts.

    Type in this link address, [without brackets] either to Google Search Box or into the Address Bar to your browser and press Enter. It has all the details about blinking codes of Sony Sets.
    electronicshelponline(.)blogspot(.)com


    In name [Electro-Help]

    Apr 16, 2012 | Sony FD Trinitron KV-32HV600 32" TV

    2 Answers

    I pressed the sleep button by accident and the pic and sound went off and the stand by/timer red light started blinking. what does it mean?


    Depends on how many times it blinks,just count the blinks Example: if it blink 2 times then pauses and blink 5 times then the code would be 25 and so on

    Once you have this code,please post it.

    Jul 30, 2009 | Sony KV-32S40 32" TV

    1 Answer

    Standby mode intermittently.


    Hello, FixYa

    I have normal tv model CNT 2588 code 981, remote control was out of order and I tried to buy a new one from many places in UAE, Suadi Arabia & Egypt but I failed due to it is old model and no spare parts. So I use the tv function through Satel Decoder and use tv main power button for swithing on and off. It seems that caused a problem and tv now could not get power to switch on. Would you e-mail me with the repair manual including the Elect.Circuit to try to repair the problem. Also if you can arrange to send me a new remote control model CNT 2588 code 980. Since the TV Picture and sound are still in an excellant condition, please e-mail me you kind response with the cost if any to send you my Address and money.

    Thanks in advanced.

    Mohamed Said

    Oct 30, 2008 | Standard (CRT) Televisions

    1 Answer

    Goldstar TV (unknown model)


    tv has a power supply fault requires service

    Oct 22, 2008 | JVC AV-27530 27" TV

    18 Answers

    Sony tv wont turn on, standby light just flashes


    I had the same problem guys! This is what I did:

    My T.V. wouldn't turn on. The standby light was flashing six times, then four, then seven...I called Sony and they told me to unplug it for a couple of minutes, then try it again...didn't work....BUT, I have found a solution:

    Try unpluging your T.V. for 4 hours+, then turn it back on. Worked for me! It's called a "hard reset" by sony. I had my T.V. unplugged for the whole day though.

    Nov 18, 2007 | Standard (CRT) Televisions

    2 Answers

    Tv stuck in standby


    If you can not turn on TV set with the power button on the TV its not a standby problem as this would by pass the standby. Theres most likly, on a set of this age, top have a poiwer regulator problem and is going to need a trained tech to assist you in this repair.

    Sep 10, 2006 | Sony KV-32S42 32" TV

    Not finding what you are looking for?
    Standard (CRT) Televisions Logo

    Related Topics:

    152 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Standard (CRT) Televisions Experts

    The Knight
    The Knight

    Level 3 Expert

    68250 Answers

    matt martin
    matt martin

    Level 3 Expert

    1191 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...