Question about Epson AcuLaser C1900 Printer

1 Answer

Espon Aculaser C9100

'SERVICE REQ'D E086'

Any idea what this means and if/what parts are required please?

T

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 163 Answers

E086 is an ADC sensor error, it is usually caused by a piece of paper caught between the rollers of the photoconductor/IDT unit. Open the front cover, operate the latch inside the handle & turn the handle to the bottom position. Pull the handle to draw out the IDT unit until it stops. Gently lift the orange handle on top of the unit to remove the PCU. Treat these parts gently and avoid shining bright light at them as they are very sensitive. Check for & remove any paper and clean any toner spills with a soft cloth or air duster being careful not to scratch the delicate surfaces. Reassemble in reverse order. Hopefully all will now be well, please take a moment to rate the success of this suggestion.

Posted on Feb 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

PRINTER SHOWING 'SERVICE REQ E300'


Sadly this is a serious error requiring a replacement Laser Unit - if you are lucky. It may also be a system board error that is falsely reporting the error.

This printer is likely to be beyond economical repair.

Aug 22, 2012 | Epson Aculaser C3800 Transfer Unit

1 Answer

My Printer Alert "Service Req


E086 is an ADC sensor error, it is usually caused by a piece of paper caught between the rollers of the photoconductor/IDT unit. Open the front cover, operate the latch inside the handle & turn the handle to the bottom position. Pull the handle to draw out the IDT unit until it stops. Gently lift the orange handle on top of the unit to remove the PCU. Treat these parts gently and avoid shining bright light at them as they are very sensitive. Check for & remove any paper and clean any toner spills with a soft cloth or air duster being careful not to scratch the delicate surfaces. Reassemble in reverse order. Hopefully all will now be well, please take a moment to rate the success of this suggestion.

May 03, 2011 | Epson AcuLaser C1900 Printer

1 Answer

Epson aculaser c8600 error message E833


my codebook said that in this particular printer service request e833 point to mis-assy ...

i do not know where are you located but in germany this bit cost over 300euro... bit can be exchanged on site by yourself, it is front part of the side feeder assy...

if you find my answer helpful, please do not hesitate to vote4 for me, thanx!

Aug 01, 2010 | Epson AcuLaser C8600 Printer

2 Answers

Espon aculaser c1100 service req e511


Error E511 is due to ur photoconductor.. the black transfer belt is out of position... it can be corrected if you know how to open up the photoconductor unit...

May 14, 2010 | Epson Aculaser C1100 Printer

1 Answer

I HAVE E511 PROBLEM ON THE C1100


The "Service Req E511" error message means that part of the photoconductor unit called the transfer belt is not being detected. Please see the following Epson article which may help. http://www.epson.co.uk/Store/Printers-and-All-in-Ones/Epson-Aculaser-C1100/Drivers-Support?target=article&extn=.html&articleId=1319

Jan 29, 2010 | Epson Aculaser C1100 Printer

2 Answers

EPSON AcuLaser C1900 with Error "Service Req E020"


ERROR CODE: E020
“SECONDARY TRANSFER VOLTAGE CONTACT/RELEASE PROBLEM”
Solution
�� Electric parts which can cause the trouble:
• Transfer Roller Pressure Solenoid (SL2)
• Transfer Roller Pressure Position Detection Sensor (PC7)
• Engine Board (PWB-A)

May 18, 2009 | Epson AcuLaser C1900 Printer

2 Answers

Epson aculaser c9100 error code Eo86


After a repair person came and worked on the Epson Aculaser CX11NF, I have vertical line, full lenght across every printed page

Oct 08, 2008 | Epson AcuLaser C1900 Printer

1 Answer

Service require E008


E008. Is a Main Motor Problem.
Main Motor, Engine, power unit

E021. Transfer Belt Cleaner Contanct/ Rease Problem.
Cleaner pressure flapper solenoid, Belt cleaner detect sensor, engine PCB.

Make sure inside on unit, has no toner spilled in it.

Feb 14, 2008 | Epson AcuLaser C1900 Printer

3 Answers

Service req e537 has come up on the display panel of our epson aculaser c1100. Cant find a manuel ....can you advise on this problem please? Rhonda


buenas tardes tengo el error service req E537 y quisiera saber como hago para girar la varilla? espero tu respuesta gracias

Dec 20, 2007 | Epson Aculaser C1100 Printer

Not finding what you are looking for?
Epson AcuLaser C1900 Printer Logo

1,320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Printers & Copiers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Cindy Wells

Level 3 Expert

4753 Answers

Are you an Epson Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...