Question about Sony RM-Y128 Remote Control
I have a Sony RM-Y128 Remote that goes to my Sony VideoscopeXBR TV. I also have a Sony Recordable VCR/DVD RDR-VX530 that I am trying to program my remote to.
I don't have the manual, and I can't find one online, but I want to know if I can program the DVD or VCR or both to the Remote?
It has a VTR123MDP switch, Buttons for Cable, DSS, TV, the basic Channel +, Channel -, Eject, Rewind, Play, Fast Forward, Pause, Stop, Record, a blank button that has a line that links to the Record
It also has TV/VTR which I am not sure what its purpose is for
It has a code set button
It has a learn button
Can someone tell me if there is a way to program my DVD/VCR Player, or how to get it to learn the codes.
If someone has a link to the instructions, that would help too. Sony didn't have them available on their site.
Tips for a great answer:
Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
On the remote control,press a device key once (i.e., DVD/VCR,
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming
a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Use the Manufacturer's Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY
Repeat steps 1 through 5 for each device you want to control.
For future reference,write down each working device
code in the following boxes
Jul 13, 2011 | One For All URC-3300 Remote Control
Sep 13, 2010 | One For All URC-3021 Remote Control
Aug 10, 2010 | Sony RM-V310 Remote Control
Jan 26, 2009 | One For All URC-4330 Remote Control
Oct 13, 2007 | Sony RM-Y128 Remote Control
Aug 19, 2007 | One For All URC-3021 Remote Control
311 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: