Question about Printers & Copiers

1 Answer

CANNON 6330 ID PROBLEM

ON OF THE NUMERIC BUTTONS WHICH WAS IMPORTANT AS A LOGIN ID IS DEFECTIVE. COULD YOU PLEASE HELP ME TO CHANGE THE ID OF CANNON 6330?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 318 Answers

Clear your ID codes

If I can remeber you do it with-
ID STOP STAR

LET ME KNOW IF IT HELPED.

Posted on Oct 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset a forgotten admin password on a Xeroc DC252


DocuColor 242 252 260 Online Support Solution Modify the Administrator...
Solution : Modify the Administrator Password From the Control Panel
  1. Press the small round [Log In / Out] button located on the left side of the Control Panel. The System Administrator Login screen will be displayed.

    dc252-cntl-pnl.jpg
  2. Enter the System Administrator Login ID using the numeric keypad on the Control Panel, and then select the [Confirm] button on the Touch Screen. The System Administrator Menu screen will be displayed.

    NOTE:The System Administrator Login ID and UserID is "11111" by default. If an error is made, press the [Clear (C)] button and re-enter the ID. To cancel the operation, select [Cancel]. If the administrator has a problem with changing or has forgotten the ID, a service call must be placed.
  3. Select the [System Settings] button twice. The System Settings screen will be displayed.
  4. Select the [Change System Admin Login ID] button.
  5. Enter in the new password.
  6. Select the [Save] button to save the setting.
  7. Select the [Close] button several times, and then select the [Exit] button to exit.

Apr 03, 2014 | Xerox Printers & Copiers

1 Answer

How do i get my xerox C7600 to stop beeping?


1. Press the [Log In / Out] button on the left side of the Control Panel. The System Administrator Login screen will be displayed.

2. Enter the System Administrator Login ID using the numeric keypad on the Control Panel, and then select the [Confirm] button on the Touch Screen. The System Administrator Menu screen will be displayed.

NOTE: The System Administrator Login ID and UserID is '11111' by default. If an error is made, press the [Clear (C)] button and re-enter the ID. To cancel the operation, select [Cancel]. If the administrator has a problem with changing or has forgotten the ID, a service call must be placed.

3. Select the [System Settings] button twice. The System Settings screen will be displayed.

4. Select the [Common Settings] button. The Common Settings screen will be displayed.

5. Select the [Audio Tones] button.

6. Select the required option from the list, and then select the [Change Settings] button.

7. Select the [Save] button to save the settings.

8. Select the [Close] button several times, and then select the [Exit] button to exit.

Thanks & regards.

Jun 03, 2011 | Xerox Workcentre 5225 / Copier, With...

2 Answers

Access authorization code


I think this is the one you want to change. If not let me know please.

  1. Press the [Log In / Out] button on the Control Panel. The Login screen will be displayed.
  2. Enter the System Administrator userID using the numeric keypad on the Control Panel, or select the [Keyboard] button on the Touch Screen to enter the userID, and then select [Save] on the Touch Screen.
  3. If necessary, enter the System Administrator password using the numeric keypad, or select the [Keyboard] button to enter the password, and then select [Save] on the Touch Screen.

    NOTE: The default userID is 11111, and the default password is x-admin (must be entered in lower case). If the userID and / or password have been forgotten, a service call must be placed.

  4. Select [Confirm] on the Touch Screen. The System Administrator Menu screen will be displayed.
  5. Select [System Settings]. The System Settings screen will be displayed.
  6. Select [System Administrator Settings]. The System Administrator Settings screen will be displayed.
  7. Select [System Administrator Login ID]. The System Administrator Login ID screen will be displayed.
  8. Select [On].
  9. Enter a new System Administrator userID in the field provided using the numeric keypad, or select [Keyboard] to use the Touch Screen keyboard.
  10. Select [Next] and re-enter the System Administrator userID in the field provided.
  11. Select [Save] to save the changes.
  12. Select [System Administrator Password]. The System Administrator Password screen will be displayed.
  13. Enter a new System Administrator password in the field provided using the numeric keypad, or select [Keyboard] to use the Touch Screen keyboard.
  14. Select [Next] and re-enter the System Administrator password in the field provided.
  15. Select [Save] to save the password.
  16. Select [Close] three times.
  17. Select [Exit].

    NOTE: Make note of the new System Administrator userID and password. If the new System Administrator userID and password are forgotten, a service call must be placed

Jan 29, 2009 | Xerox CopyCentre C123 Copier

1 Answer

I need to change the access code as some non authorized people are using my photocopier. How can I do that?


I am answering this twice since it appeared twice, If this isnt the code you want to change let me know. I believe this is the one you are asking.

  1. Press the [Log In / Out] button on the Control Panel. The Login screen will be displayed.
  2. Enter the System Administrator userID using the numeric keypad on the Control Panel, or select the [Keyboard] button on the Touch Screen to enter the userID, and then select [Save] on the Touch Screen.
  3. If necessary, enter the System Administrator password using the numeric keypad, or select the [Keyboard] button to enter the password, and then select [Save] on the Touch Screen.

    NOTE: The default userID is 11111, and the default password is x-admin (must be entered in lower case). If the userID and / or password have been forgotten, a service call must be placed.

  4. Select [Confirm] on the Touch Screen. The System Administrator Menu screen will be displayed.
  5. Select [System Settings]. The System Settings screen will be displayed.
  6. Select [System Administrator Settings]. The System Administrator Settings screen will be displayed.
  7. Select [System Administrator Login ID]. The System Administrator Login ID screen will be displayed.
  8. Select [On].
  9. Enter a new System Administrator userID in the field provided using the numeric keypad, or select [Keyboard] to use the Touch Screen keyboard.
  10. Select [Next] and re-enter the System Administrator userID in the field provided.
  11. Select [Save] to save the changes.
  12. Select [System Administrator Password]. The System Administrator Password screen will be displayed.
  13. Enter a new System Administrator password in the field provided using the numeric keypad, or select [Keyboard] to use the Touch Screen keyboard.
  14. Select [Next] and re-enter the System Administrator password in the field provided.
  15. Select [Save] to save the password.
  16. Select [Close] three times.
  17. Select [Exit].

    NOTE: Make note of the new System Administrator userID and password. If the new System Administrator userID and password are forgotten, a service call must be placed

Jan 29, 2009 | Xerox CopyCentre C123 Copier

3 Answers

Cannon ir 6000 download mode problem


my copier not working only display the download mode.

Nov 18, 2008 | Canon imageRUNNER 8500 Copier

1 Answer

I have a cannon cannon iPIXMA 4000, and have just changed my computer for an imac but cannot locate my installation disc for it,I have my A560 and A95 CAMERA solution discs and wondered if it`s possible to...


You can download the Mac softwrare from here:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=357&modelid=10239

You cannot use the camera software to work with the printer. They require separate drivers.

Should you require any further help, please post back with details. Or else, kindly rate this a Fixya in appreciation for my efforts.

Thank you for using Fixya!
ID

Nov 12, 2008 | Cannon Printers & Copiers

3 Answers

Xerox 5665 beeping for all functions


  1. Press the [Log In / Out] button on the left side of the Control Panel. The System Administrator Login screen will be displayed.

    dc252-cntl-pnl.jpg

  2. Enter the System Administrator Login ID using the numeric keypad on the Control Panel, and then select the [Confirm] button on the Touch Screen. The System Administrator Menu screen will be displayed.

    NOTE: The System Administrator Login ID and UserID is '11111' by default. If an error is made, press the [Clear (C)] button and re-enter the ID. To cancel the operation, select [Cancel]. If the administrator has a problem with changing or has forgotten the ID, a service call must be placed.

  3. Select the [System Settings] button twice. The System Settings screen will be displayed.
  4. Select the [Common Settings] button. The Common Settings screen will be displayed.
  5. Select the [Audio Tones] button.
  6. Select the required option from the list, and then select the [Change Settings] button.
  7. Select the [Save] button to save the settings.
  8. Select the [Close] button several times, and then select the [Exit] button to exit.

Jul 03, 2008 | Xerox 5665 Copier

2 Answers

Proplem in aficio 450


322 C 1st laser synchronization error
• The 1st laser synchronization signal
cannot be detected by the main scan
synchronization detector board even
if the laser diodes are activated.
• Poor cable connection between the
laser synchronization detector board
and the LD unit.
• Laser synchronization detector board
out of position and angle of reflection
not correct
• Laser synchronization detector board
defective
• LD unit defective

Above is a detailed description of your problem if the copier has had a knock there maybe a mirror out of position. remove the laser unit and open. check that the mirrors are in there correct places.

Once you have done this enter service mode by pressing the yellow clear all button type using the numeric keys 1 0 7 the hold the pink stop button down unit the screen changes. press the Copy SP mode button on the screen then turn the machine off using the switch on the left hand side wait about 5 - 10 seconds and switch on then try the copier. If the problem comes up again you will most likely have to replace the LSU (Laser Scanner Unit)

(Important DO NOT ADJUST ANY OTHER SETTINGS IN COPY SP MODE AS YOU MAY DAMAGE THE MACHINE)

Hope this is some help please rate me
J

Dec 16, 2007 | Ricoh Aficio 450 Copier

1 Answer

User Code


You may want to print this out because it is long.
Adding codes
Adding codes is really pretty simple.
First Add a System Manager code:
  • Press the 'additional functions' button to the right of the touch screen.
  • Press the 'system settings' button ON the touch screen.
  • Press the 'system manager settings' button on the touch screen.
  • Press the 'system manager' button on the touch screen and then use the touch screen to enter the system manager's name. Press 'done' when you have finished.
  • Press the 'system manager id' button on the touch screen and use the numeric keypad located to the right of the touch screen to create the id.
  • Press the 'system password' button on the touch screen and enter a numeric password for the system manager. YOU SHOULD MAKE A NOTE OF THE SYSTEM MANAGER ID AND PASSWORD, AS THIS WILL BE NEEDED TO CHANGE SETTINGSLATER.
  • Press 'next' on the touch screen.
  • Press 'email address' to add an email address for the system manager.
  • Press 'contact information' to add an extension to reach the system manager at.
  • Press 'ok' to complete the process.
  • Press 'done'.
Next add user codes:
  • Press the 'additional functions' button
  • Press 'system settings' button on the touch screen.
  • Press 'department id management' on the touch screen.
  • Press the 'on button' on the touch screen.
  • Press the 'store dept. id / password' button on the touch screen.
  • Press 'store' on the touch screen.
  • Press 'department id' on the touch screen and then enter a numeric code using the keypad.
  • If you want additional security you can also set up a password by pressing 'password' on the touch screen and, using the numeric keypad again, enter the password. The password can be left blank if desired.
  • Additionally you can set an impression limit for that user by pressing 'impression limit' on the touch screen.
  • Press 'ok' on the touch screen to add the user.
  • If you wish to limit impressions then you must press the 'limit impress.' Button on the touch screen.
  • If you want to add more users at this time go back to step 6.
  • Press the 'done' button.
  • Press the 'off' button at the bottom of the touch screen next to 'accept jobs with unknown id.
  • Click 'ok' to complete the process and start using the copier or go back to step 5 to add more users.
After this process users will have to enter a user id to use the machine. At the end of the copying process users should press the 'id' key located at the bottom right of the keypad to logout. The machine will automatically log users out if there has been no activity for a few minutes and this can be changed by pressing 'timer settings' in the additional functions.
While this seems like a lot it actually doesn't take very long to do. There is a far more elegant set of instructions in the 'reference guide' that came with the machine, which includes pictures, and starts on page 4-2.

Nov 07, 2007 | Canon NP 6050 Copier

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96372 Answers

old marine
old marine

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...