Question about Sony SDM-HS73 17" Flat Panel LCD Monitor

1 Answer

Sony SDM-HS73 problem

Hello. My power went off and when i turned my computer back on, the screen was like greenish. Like as a filter. I tred to go color settings and it wont let me change green. I goes to red then skips green and goes to blue.

I have a screenshot if any of you guys want it, but ill post it later

So if you guys can help me that would be great. :]

Posted by on

  • kiashamoose Oct 29, 2008

    Thanks. One more thing, I looked up on the sony main site, and it said that Green never changes. It stays on 118 on my computer. And you just need to get the right code for blue and red. I want to know what the right color code is if its possible. And see if it works before i get another monitor.

  • Anonymous Nov 26, 2008

    The same problem that kiashamoose, the power went out for few seconds and when it came back on the screen was a greenish color.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 348 Answers

There may some spike(voltage goes above 1000v for few microsecond) come from electricity board
which may damaged colors ic you have to replace it and connect spike arrester before pc

Posted on Oct 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony sdm-hs73p LCD blacks out


Common problem in the HS73/93 is bad soldering works in the lamp assemblies, see my pictures here:
http://s807.photobucket.com/albums/yy352/budm/Sony%20SDM-HS73/

But look for bad caps (leaking/bulging top) first in the power supply section.
http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net

Jun 01, 2010 | Sony SDM-HS73P 17" LCD Monitor

1 Answer

Sony SDM HS73 ''turns off''


One thing I know for sure on this model HS73/HS93 is that the backlight assemblies failed due to poor soldering works. This may the problem with your monitor.
http://s807.photobucket.com/albums/yy352/budm/Sony%20SDM-HS73/

http://s807.photobucket.com/albums/yy352/budm/Sony%20SDM-HS93/

It is very time consuming repair works that I doubt very much if repair shop will do the work.

Apr 19, 2010 | Computers & Internet

1 Answer

No input signal, go to power save sony sdm-hs93


I f you see the message on the screen indicating 'NO INPUR SIGNAL', you need to check the VGA cable and both ends of the connectors also. Try this monitor with other PC also.

This SDM-HS73/93 have common problem: bad backlight assemblies due to poor workmanship in sodlering works, see my pictures below. You should also inspect the caps. This is not recommend for DIY.

http://s807.photobucket.com/albums/yy352/budm/Sony%20SDM-HS93/

http://s807.photobucket.com/albums/yy352/budm/Sony%20SDM-HS73/

http://s807.photobucket.com/albums/yy352/budm/Sony%20SDM-HS73/

Apr 18, 2010 | Sony SDM HS93 19" LCD Monitor

1 Answer

Hello!Sony SDM-HS73 power-inverter problem


At this point you may have bad transformers, bad tuning cap, you need to check the frequency of the inverter oscillator to see if both of them are running at the same frequency, the bad one may not be. The Inverter/power supply is not made by SONY, Powernet makes the board. Please see what went wrong with the one I fixed.
http://s807.photobucket.com/albums/yy352/budm/Sony%20SDM-HS73/
One thing to keep in mind, when the board turn into carbon (blacken), it will conduct. The circuits operate at high voltage and high frequency.

Apr 09, 2010 | Sony SDM-HS73/H (Grey) Monitor

2 Answers

Sony Monitor ... SOMEONE HELP, please!


Thanks for your response. I actually sent my monitor out to guy that does LCD repairs for cheap. He changed out the video board and did repairs similar to yours but still couldn't get the monitor to work. After some more testing, he found that one of the chips that contained Sony's proprietary firmware had gone bad and said there really was no way to replace the chip. It definitely seems like we had the same problem, so I thought this information may help. I'm sorry that you paid so much for repairs that didn't solve the problem.

May 14, 2007 | Sony SDM-HS73P 17" LCD Monitor

4 Answers

Sony SDM-HS73 Not Staying On


The problem is with power inverter, usually the capacitors go bad and need to changed, they might be bulged and or leaking. Very cheap fix, less than a buck apiece and an hour with a solder iron. Google it to find more info.

Apr 30, 2007 | Sony SDM-HS73P 17" LCD Monitor

Not finding what you are looking for?
Sony SDM-HS73 17" Flat Panel LCD Monitor Logo

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Computer Links

Level 3 Expert

2385 Answers

Are you a Sony Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...