Question about Mitac Mio P550 GPS Receiver

1 Answer

Problem with windols mobile

Hi i have problem wit my miop550 i cant start the windows mobile,i make hard reset still nothing.can i instal windols mobile agein,and wheare i can find it

Posted by on

  • itzo_kut Oct 29, 2008

    hi when i turn on my mio p550 on the screen is showing mio start picture with R05.30101.0331 i dont know what is that and the pda is not working

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Had the same problem, just power off the device completly slidebutton underside, after a minute, power on pushing the toggle/joystick upwards, when splashscreen shows, release and wait for a minute

Posted on Nov 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I turn on my device and it only loads up the start page and then hangs there .......


First try a reset... then try turning off the little power switch next to the reset, then turn it back on. If none of this works, your firmware is likely corrupted... then: You either need to return it to Mitac or locate (Google) & flash the firmware file into the unit as follows:

Connect the mio p550 to PC
1.put the Button of the PDA in ON position
2. hold the joystick downward and press the reset button
3.choose "Image Upgrade tools"
4.choose "0=Image by USB"
5.intall the usb driver (PC require the drivers). The driver in the
folder "USB driver" that comes with the firmware file.
6.open the software "dnw5.0e" (also comes with the firmware package).
7.(if you want to make a test of connection USB, click the "USB
port/Status". If all is ok go to step 8
8. click "USB port/transmitted" and to show the way of the file
"MioP550 - Osc260A R05_P09.nb0"
9.press the reset button to restart the mio p550.

Jul 09, 2010 | Mitac Mio P550 GPS Receiver

2 Answers

Navman n40i smart st compatability problem with vista.


Hi,

Are you not able to run the activesync program despite the Vista warning? Did you try running it in compatibility mode? What happnes when you try to connect with sync center (what happens...any error messages)? Regarding the mobile device centre...did you check that McAffe and windows firewall is not blocking it from internet access?

Jan 26, 2008 | Navman NavPix N40i GPS Receiver

1 Answer

My garmin colorado starts up with the logo of Garmin than nothing Not with a hrd reset neither with a soft reset I can only switch off when the batteries are taken out so start with wheel button pushed...


Hi, if USB connection is OK, you have to make hard reset after that download firmware 3.40 by Uploader (no Garmin WebUploader). Your Co will startup but your data will be lost. Jean

Jul 04, 2010 | Garmin Colorado 300 Handheld GPS Receiver

1 Answer

I formatted my p550 and I don't know how to bootup or reinstall the O/S


You'll need to find the firmware (ROM) image file (Google) and then: Connect the mio p550 to PC
1.put the Button of the PDA in ON position
2. hold the joystick downward and press the reset button
3.choose "Image Upgrade tools"
4.choose "0=Image by USB"
5.intall the usb driver (PC require the drivers). The driver in the
folder "USB driver"
6.open the software "dnw5.0e"
7.(if you want to make a test of connection USB, click the" USB
port/Statute". If all is ok go to step 8
8. click "USB port/transmitted" and to show the way of the file
"MioP550 - Osc260A R05_P09.nb0"
9.press the reset button to restart the mio p550.

Good luck!

Feb 22, 2010 | Mitac Mio P550 GPS Receiver

1 Answer

Sat nav froze


i turn on my gps on itz froze aint nothing comming up after

Jul 29, 2009 | GPS Devices

1 Answer

My Magellan GPS stucked in the setting mode and there is no way out. Need some help.


hi tchen2005, try the hard reset first. its the little hole on the side of the unit. while unit is off, use a paperclip the reset the unit. if that does nothing to fix the problem, get the latest update. Magellan has two different updates for the 4040, follow the directions to make sure you get the right one. if you still have the same problem after you install the update, the digitizer is probably broken. hopefully that is not the case, because the digitizer is part of the screen and cant be replaced without replacing the screen unless your very skilled with soldering micro electronics.

if you need further help, just reply to this post.

Jul 23, 2009 | Magellan Maestro 4040 GPS Receiver

1 Answer

Start problem


Hi, if your TomTom one is an early version, you need to press the reset button underneath with a pin. Normally a tiny hole with reset printed next to it.

If it's one of the brand new TomTom one's then they've removed the reset button, and now you need to hold down the power/start button for 15 seconds to do a hard reboot.

See if that solves your problem.

May 25, 2009 | Tomtom ONE GPS Receiver

1 Answer

After trying to install new maps, Garmin nuvi 350 don't start


Look near the SN # and press the reset button.

or

with the garmin off, hold down the right bottom of the screen and turn the garmin on, it will then ask you if you want to perform a hard reset. Choose yes and that should fix your problem.

Nov 30, 2008 | Garmin nuvi 350 GPS Receiver

2 Answers

Evesham 6200 nav-cam. Will not turn on! Just a blank screen, top left LED works when charging and when conected to the computer. Have tried hardware and software reset nothing happens.


Evesham Nav-Cam 6200 turns on then sticks at the front page
( navigator, MP3 Photo, Setup) and won't go any further, tried
hard and soft reset but nothing happens. can you help.

Jul 13, 2008 | Evesham Nav-Cam 7700 GPS Receiver

1 Answer

Garmin Mobil XT starts, but does not connect. Window appears: Data type misalignment at Program address 0x03F966C8 in background thread NULL (Main InitIstance)


Worked for me on a Samsung i780 I had that problem once when I was using the Garmin Mobile XT ... googled about it .... some said had to hard reset .... stumbled upon one simple solution ...... sometimes the accumulated SMSes in our Sam i780 can cause that problem ( I still cant figure out the relationship with sms and garmin ...hehe ). Since I started deleting my sms I never had a problem with Garmin not loading up.

Jul 08, 2008 | GPS Devices

Not finding what you are looking for?
Mitac Mio  P550 GPS Receiver Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitac GPS Devices Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Simon Flummox
Simon Flummox

Level 2 Expert

56 Answers

Are you a Mitac GPS Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...