Question about Xerox Phaser 8550DX Laser Printer

3 Answers

Error code 19,003.48:7193

I received error code 19,003.48:7193. What does that mean?

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 29 Answers

Well... I couldnt scape. My 8560 print head needed to be replaced!!!

I',m luck that my 8560 still is on its warranty period.

Posted on Oct 28, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 37 Answers

This error is a printhead calibration fault. The solutions are reset NVRAM, replace NVRAM, then replace the PRINTHEAD.
I would recommend calling a certified service technichian.
Hope this helps.

Posted on Dec 04, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 29 Answers

Turn on your printer. It will begins to warm. When the error occurs, shut it down and imediattly turn it on again. The tip is avoid that the printer fan cools the print head.
After 4 ou 5 turn off/turn on, printer will start to go further and further in its "starting procedures". Maybe the error code can even change.
The procedure that I described was experienced for me one week ago.
I encourage you to do this steps before taking your printer to a service technichian. It can save you a lot of ca$h ! :)

Posted on Aug 06, 2009

3 Suggested Answers

  • 2072 Answers

SOURCE: J1 error code

J1 is detecting either a low or out of toner condition.
Maybe just need to have the cartridge shook, replaced or it could lastly need the toner sensor replaced.

Posted on Mar 07, 2008

zeroxparts
  • 15 Answers

SOURCE: I am receiving error code 39,012.40:76243 on C2424

Replace document feeder. 004k07270 $390.00

Posted on Sep 08, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CD player displays error code: ER-1


That error code means an unknown error has occurred. Try cleaning the player itself, along with the CD's prior to insertion to see if that helps.

Feb 02, 2014 | Dual XD1228 CD Receiver

1 Answer

Error code 22


"Error 22" on a Pioneer usually means an unsupported CD format. The disc you are trying to play is not supported or is very badly scratched so the player cannot determine the format.

Dec 19, 2013 | Pioneer Car Audio & Video

1 Answer

Was receiving E68 code on Frigidaire GLEQ2152ES1, replaced circuit board and am still receiving the e68 error code. What else will cause this error?


Hi yoyosam66...
Your e68 error code means:
Please take time to rate me
-----------------------------------------------------------------------------------------------------------------------------------------------
E68 - Push button does not function
Cause:
Push button held too long or wedged in the control panel. Solution:
Press buttons lightly and release.
Disengage button.

Aug 17, 2011 | Frigidaire GLEQ2152ES Electric Dryer

2 Answers

What does error code E6 mean? On a Mitsubishi Mr. Slim A/C


Code E6
Error detail Indoor/outdoor unit transmission error (signal receiving error).
Inspected unit Indoor.

Air Conditioning Fault Codes

Aug 01, 2011 | Mitsubishi Mr. Slim MXZ30TN Air...

1 Answer

What does error code 3151-335a-1380-2203-c000-0001 mean


If you receive a C000-0001 error code on your Xbox, this means that your console needs to be repaired. You can check the all of the error codes here.

May 30, 2011 | Video Game Consoles & Games

3 Answers

Error codes


Hello,
Here are the common error codes for the LG machines.

LG Washing Machine Error or Fault Codes

If you have a LG Washing Machine you may see an error code come up and wonder what it is. Here are the common error or fault codes that will be displayed on the LG machine.

OE

This means that the washer has tried for ten minutes to drain the water out of your machine and the water did not drain out.

UE

This means that the load in the drum is out of balance causing excessive vibration when spinning.

IE

This means that the washer has not filled with water in 8 minutes.

LE

This means that the motor and the control panel are not talking to each other properly

PF

Power Failure – The power has gone out to the machine and then has come back on

FE

This means that there is too much water in the machine

PE

This means that the water level sensor is not working properly

CE

The washer motor has received and over current condition

TE

This means that your heating sensor is not working properly

SE

This means that you had a temporary sensor error

HE

This means that you had a temporary heater problem

DHE

This means that you had a temporary dry heater problem

This will give you a basic idea of what has caused your error code.


Heatman101

Mar 15, 2010 | LG WM2277H Front Load Washer

1 Answer

ERROR CODES 15 and 12


http://audio.manualsonline.com/manuals/mfg/pioneer/deh-2800mp_2.html

May 05, 2009 | Pioneer DEH-2800MP CD Player

1 Answer

Error Code E-05?


Error code )% i think means no focus, you could try cleaning the laser, but otherwise its a replacement laser :(

Regards

Mark

Jan 18, 2008 | Kenwood KDC-MP4032 CD Player

Not finding what you are looking for?
Xerox Phaser  8550DX Laser Printer Logo

644 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Whit
Whit

Level 1 Expert

185 Answers

iteminconline

Level 2 Expert

110 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...