An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 50 answers of more than 400 characters.
An expert whose answer got voted for 20 times.
Re: USE OF S VIDEO JACK
All u need to do is that when u connect the laptop with the tv and if u want to see both the tv and the laptop together then all u need to do is that press and hold down the fn key on the keyboard and then press f8 key on the keyboard and keep toggling it first it will go to the tv screen and then again if u press fn+f8 then again it will again come back to the laptop and then when u press it it will go back to the tv and again when u press u will be able to see the screen on both the television and the computer screen....
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Most Laptops have a VGA output port. You would just hook this to the VGA input of the TV for video (picture). You would then need to hook an audio cable from the laptops headphone jack to the TV's VGA's Audio Input jack. Newer laptops have a HDMI output so that is easier and can hook directly to the TV's HDMI input for both video and audio.
Depends what your TV supports. You could do vga to hdmi cable if your tv is newer, this will only do video since vga doesn't support sound. You would need a headphone jack to whatever your tv supports for sound adapter.
Check your ports on the lap top see if you have s video or hdmi or dvi or VGA the best is hdmi if you have that get a cable for either one of you connections also match connections from the lap top to what you have for your TV more than likely if they are both fairly new you should have hdmi connections for both get a cable that is long enough. I get my cables at amazon.com their prices are the bomb.
Connect them together both ends to lap top and to tv then make sure that you have a line in jack stereo jack with RCA ends hook that to the back of your tv and your lap top in stereo jack even better to your surround sound system. Set your TV to AVI 1 or 2 or DVI or whichever is your connection start a movie on the lap top and turn your sound on and see if you have a picture on your screen you should have the same thing as what is showing on your monitor on your lap top. Adjust settings and have fun!
you need to connect a miniture stero output jack from your computer audio out to the audio in mini jack or it if has the large head you will need to buy the large adapter too. if you connected a round 9 pin it's for video only.
In order to send the picture from any computer to a TV screen, you must have a VGA input on the TV. You can't output your computer signal using s-video, HDMI, or component cables because they aren't designed for computer use. If you have a VGA connection on your TV, then you can use a standard VGA cable. If your TV doesn't have one, unfortunately you're out of luck.
I hope I've provided you useful assistance and that this information
allows you to make an informed decision as to how to proceed from here.
I hope I've earned a positive rating from you today.
Please let me know if I can be of further assistance.
(Have u got a small cable with both side 3.5mm pin like head ph cable cord if not buy it) NOW FoLLOW THE STEPS 1)plug the cable between tv card jack(green slot) to line in jack (computer pink slot) 2)plug ur spker to line out jack(green slot in computer) 3) double click on small spker icon (left side to ur screen near clock) 4) click options menu>Properties>chose audio out option 4m drop box(see image) 5)click rear pink in >ok And all done have fun
Those screens tend to lose their tightness as time goes on from all the opening and closing. Regrettably, there isn't much to be done with them except replacement of the part. You can jury rig it but that's about it. I,too, had a zv5000 and experienced the same thing.
Please don't hold my bad news against me when you rate my answer! ;-)
(Have u got a small cable with both side 3.5mm pin like head ph cable cord if not buy it) NOW FoLLOW THE STEPS1)plug the cable between tv card jack(green slot) to line in jack (computer pink slot)2)plug ur spker to line out jack(green slot in computer)3) double click on small spker icon (left side to ur screen near clock)4) click options menu>Properties>chose audio out option 4m drop box(see image) 5)click rear pink in >okAnd all done have fun