Question about Magellan eXplorist 210 GPS Receiver

1 Answer

CAN NOT GET MAP ON GPS MAGELLAN EXPLORIST 210

I TRIED CONTACTING MAGELLAN TO FIX MY PROBLEM WITH THE BASE MAP. WHEN I TURN ON THE UNIT IT SAYS "UNIT CURRENTLY CONTAINS NO BASE MAP INITIATING MAP UPLOAD" CAN YOU E-MAIL ME A BASEMAP SO I MIGHT BE ABLE TO DOWNLOAD ON THE UNIT. IT STAYS ON WITH NO CHANGE JUST THE SAME SCREEN. THANKS JOE DEJOEMON@AOL.COM

Posted by on

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Try updating the firmware from the magellan website that fixed mine.

Posted on Jun 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need new screen for magellon explorist 100 gps


http://cgi.ebay.com/Magellan-eXplorist-100-200-210-300-400-LCD-Screen-/350437050321?pt=LH_DefaultDomain_0&hash=item5197ad07d1

My recommendation would be simply to replace entire unit unless you have experience fixing electronics.

Mar 03, 2011 | Magellan eXplorist 100 GPS Receiver

2 Answers

No base map message


heres the basemap
http://rhamphorinkx.newmail.ru/maps/na_lb112%20(ex_400-500-600_na).rar

Copy attached "BASEMAP.MGI" to eXplorist, in "Background maps" folder.

These downloads are in rar compressed format if you need a free decompressor one can be downloaded from www.rarlabs.com

Jun 28, 2008 | Magellan eXplorist 210 GPS Receiver

1 Answer

Magellen 210 base map


The maps are missing from the device, do you have the original maps that came with the gps? attempt to reinstall the maps into the gps.

Jun 27, 2008 | Magellan eXplorist 210 GPS Receiver

1 Answer

The zoom (+) key on my Magellan Explorist 210 GPS has become very sticky, and only works (eventually) if hit sharply. Is it possible (or practicable) for it to be repaired?


Yes it can be fixed but requires the unit to be taken apart. Most likely the rubber keys have lost the contact surface through use over time. Could be dirt on the pad surface...(inside)

Feb 13, 2010 | Magellan eXplorist 210 GPS Receiver

1 Answer

No base map message


Go to: http://www.magellangps.com/support/product.asp?prodid=1114

Or, if this doesn´t work, go to www.magellangps.com, click on "support", click on "legacy products" (left) and click on "eXplorist 210 Europe" (do NOT click on "eXplorist 210 North America")

On this page click under Updates/Upgrades on "version 2.57", and follow the instructions.

After you have installed the firmware you will have the basemap and some new windows on the GPS. Good luck and enjoy!

Jun 29, 2008 | Magellan eXplorist 210 GPS Receiver

1 Answer

No base map


Go to: http://www.magellangps.com/support/product.asp?prodid=1114

Or, if this doesn´t work, go to www.magellangps.com, click on "support", click on "legacy products" (left) and click on "eXplorist 210 Europe" (do NOT click on "eXplorist 210 North America")

On this page click under Updates/Upgrades on "version 2.57", and follow the instructions. You will have to register your GPS; register under a european country and it will work out fine.

After you have installed the firmware you will have the basemap and some new windows on the GPS. Good luck and enjoy!

Jun 28, 2008 | Magellan eXplorist 210 GPS Receiver

3 Answers

Explorist 210 no base map


I solved this problem by gonig to the secret menu by holding the nav + power. I entered the value # 95 in the menu. This will let you format the memory area in the unit then I down loaded the latest firmware update from magellan.com and installed it on the
unit.I had already made a copy of the files on the unit in my hard drive so i copied the files back to my unit so that i did not loose anything important like poi's and geocaches etc...

PS when I did the firmware up date the base map must have been restored.

Jun 27, 2008 | Magellan eXplorist 210 GPS Receiver

1 Answer

Loading Topo maps...210 says invalid base map??


To get the base map and to get your unit functioning again:
Install the firmware again:

Go to: http://www.magellangps.com/support/product.asp?prodid=1114

Or, if this doesn´t work, go to www.magellangps.com, click on"support", click on "legacy products" (left) and click on "eXplorist210 Europe" (do NOT click on "eXplorist 210 North America")

On this page click under Updates/Upgrades on "version 2.57", and follow the instructions. You will have to register your GPS, register it under a European country.

After you have installed the firmware you will have the basemap and some new windows on the GPS. Good luck and enjoy!

May 07, 2008 | Magellan eXplorist 210 GPS Receiver

1 Answer

No map


Install the firmware again:

Go to: http://www.magellangps.com/support/product.asp?prodid=1114

Or, if this doesn´t work, go to www.magellangps.com, click on "support", click on "legacy products" (left) and click on "eXplorist 210 Europe" (do NOT click on "eXplorist 210 North America")

On this page click under Updates/Upgrades on "version 2.57", and follow the instructions. You will have to register your GPS, register it under a European country.

After you have installed the firmware you will have the basemap and some new windows on the GPS. Good luck and enjoy!

Apr 13, 2008 | Magellan eXplorist 210 GPS Receiver

2 Answers

Explorist 300


since the unit doesn't have a base map it needs to be loaded with the base map so send it for a service so that the base map could be added.

Jan 04, 2007 | Magellan eXplorist 300 GPS Receiver

Not finding what you are looking for?
Magellan eXplorist 210 GPS Receiver Logo

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magellan GPS Devices Experts

Roni Bartlett
Roni Bartlett

Level 1 Expert

31 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

szanghi

Level 2 Expert

76 Answers

Are you a Magellan GPS Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...