Question about Brother MFC 210C All-In-One InkJet Printer

2 Answers

Error 41 I have a Brothers MFC 420 CN and have a message "Unable to Int." Troubleshooting and routine maintenance Chapter in "Users Guide". I called the MFG and was told I had to send it in for a new printer head. It's like new. The only thing is I wasn't using it for about eight (8) months. Through the MFG I was able to retrieve the error message. It is Error 41. I don't want to buy a new printer. This one is like new. Please Help!!!!

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,041 Answers

Hi there

Error 41 means there is a major problem with the printhead, usually
requires a print head replacement.

My advice is to take it to a
Brother service centre while if it is under warranty.

If it's out of warranty they are usually a throw away job, the heads cost as much as the printer.

Sorry I know what it feels like, just have a go and see what you can do, clean the heads and so on.

All the Best and good luck: Pineworks

Posted on Apr 25, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Http://office.manualsonline.com/ex/thread/view/idThread/149847

..cyndi..

Posted on Sep 02, 2009

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Unable to clean-see troubleshooting and routine maintenance chapter in user's guide. . .nothing happens when I do what the guide says


I have a MFC-420CN. If you have followed the guide and have no results, you can call Brother Customer Service : Canada 1-877-2768437 or USA 1-800-284-4329.

Apr 02, 2012 | Brother MFC 420CN All-In-One InkJet...

1 Answer

THE LCD SCREEN SAYS PRINT UNABLE 50 AND SEE TROUBLESHOOTING AND ROUTINE MAINTENANCE CHAPTER IN USERS GUIDE.


Read the users guide and do what they say in the Troubleshooting and Routine Maintence Chapter for the "Print Unable 50" error message.

Mar 29, 2011 | Printers & Copiers

1 Answer

I have a brother mfc 3360c printer and I am trying to install it. I am getting an error message that says see troubleshooting and routine maintenance chapter in users guide Print unable 50


Try these solutions ... these are for 440cn .. should work for urs as well

http://www.fixya.com/support/t243260-error_message_50

otherwise, here the user's guide

http://office.manualsonline.com/manuals/mfg/brother/mfc3360c_fax1860c.html

good luck






Dec 05, 2009 | Printers & Copiers

1 Answer

Just got a brother mfc 5840 cn from a yard sale and plugged it in and have a unable to clean. Trouble shooting and routine maintenance chapter in the users manual. It didnt come with one?


and plugged it in and have a unable to clean.
Are you saying it has an ERROR message "unable to clean..."?
if so, it just may need new ink cartridges.

Aug 14, 2009 | Printers & Copiers

1 Answer

Printing after being on same phone line as printer/fax


This link will open the Users Manual, but you will need a PDF viewer such as Adobe Reader or Foxit Reader in order to open it.

Go to page 12-4 in Chapter 12, Troubleshooting and routine maintenance. Follow the actions recommended for the Unable to clean error message (and the four other Unable to... error messages).

Jul 04, 2008 | Brother MFC-3240C All-In-One InkJet...

2 Answers

Error message on my mfc 420 mc


this has been written many times here in the forum.

plz search forum "unable to print"

Jun 22, 2008 | Brother MFC 420CN All-In-One InkJet...

1 Answer

Unable to print


ph is defective and needs replacing (4F: thermo sensor within ph)

Mar 29, 2008 | Brother MFC 210C All-In-One InkJet Printer

2 Answers

Will not print


I have the same error message “Check the Troubleshooting and Routine Maintenance Chapter in User's Guide" I called customer service for "BROTHER 1-800-284-4329 USA; 1-877-BROTHER for CANADA. The Tech’s and I performed a series of diagnostic test, via the phone but were unable to solve the problem... Brother seem to believe that I have a defected printer head, Brother referred me to a local authorize service agent for Brother. I do have my User's Guide and there is no additional information that I was able to use to resolve this problem. HOW EVER, I am able to get the machine to print by opening the cover and close it as if I had installed ink, or removed a paper jam “SIMPLY OPEN AND CLOSE THE COVER”. I also vacuumed and blew the insides and the outside buttons of the machine with forced air from my vacuum, after all that I still have the same problem. My solution...buy a new machine mine is 32 months old and I probably have ran 15k or more print, fax, and copy jobs.
Some times we need to know when to move on, TIME IS MONEY AND TIME WASTED IS UN-REFUNDABLE.
GOOD LUCK
TG/Ks

Jan 22, 2008 | Brother MFC-3240C All-In-One InkJet...

7 Answers

Unable to print, See troubleshooting and general maintenance in User's Guide, however, I do not have a User's Guide! What to do?


unable to print, See troubleshooting and general maintenance in User's Guide, however, I do not have a User's Guide! What to do?

Nov 14, 2007 | Brother MFC 420CN All-In-One InkJet...

Not finding what you are looking for?
Brother MFC 210C All-In-One InkJet Printer Logo

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Printers & Copiers Experts

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Rick Johnson
Rick Johnson

Level 2 Expert

84 Answers

John mullen

Level 2 Expert

245 Answers

Are you a Brother Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...