Question about Panasonic Televison & Video

1 Answer

I own a Panasonic PT-60LC14 DLP TV. After the tv has been on for awhile, the red color drops from the picture. I have to turn ther tv off and then on again to get it to come back. Has anyone had this problem with their tv and how did you fix it?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I used to be a tv technician.it sounds like an intermitent fault,which only does it sometimes.most likely cause is dry joints on circuit board,which is faded or discoloureded solder.try resoldering dry joints ,faded or discoloured solder on circuit board.as its an intermitent problem so it sounds like dry joints on circuit board which is faded solder,which means only half of the current is passing through the circuit..resoldering will allow the full current to go through circuit.

Posted on Feb 25, 2012

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 58 Answers

SOURCE: TV blew out

if the lamp light is flashing u need to replace the lamp. u should have instructions on the set or in the manual

Posted on Dec 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset lamp timer in panasonic dlp tv pt-60lc14


If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Search the site by type in the "brand name" of your device, in the "Search box at the top right of the Homepage" to get gathered related posts.

Feb 19, 2017 | Panasonic Televison & Video

1 Answer

My tv blinks red every five seconds three times pt-60lc14


The temperature sensor has failed its either shorted or open which will cause the 3 blink error

Feb 25, 2012 | Panasonic PT-60LC14 60" Rear Projection...

1 Answer

I might have issues with my color wheel, Im bnot recieving a picture with full color!


if tv is lcd it has three color filters which can be damaged by heat.If it is dlp then it has a colr wheel which spins.they are located in the light engine.alcd tv has 3 lcd panels a color filter(red green or blue)is mounted behind panel coloring light going through lcd.prisms combine pictures before going through lens. If color burns off of filter then color of picture is affected

Oct 19, 2009 | Panasonic PT-50DL54 50" Rear Projection...

2 Answers

Panasonic PT-52LCX16 DLP TV color problem


This is a very common failure on Projection TV sets.
  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.

You can see some example photos and find a solution here...
http://www.fixya.com/support/r2861627-updated_convergence_problems_amp

Apr 26, 2009 | Panasonic PT-53TW53 53" Rear Projection...

1 Answer

Panasonic PT-60LC14 Convergence Issue


Projection TV sets have two very common problems listed below.

Problem #1) Convergence


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Nov 06, 2008 | Panasonic PT-60LC14 60" Rear Projection...

1 Answer

Panasonic projection tv


turn off the color and see if its still ther if so possible convergence  alignment.

Sep 30, 2007 | Panasonic PT-53TW53 53" Rear Projection...

1 Answer

PT-60LC14 screen problem!!!


try to resolder main board and crt board first then,post me again. hope this help u...

May 15, 2007 | Panasonic PT-61LCX65 61" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...